APCIS - Katalogas Site

ICT technologies, inclusive and creative society

Artificial intelligence, big and distributed data, multidisciplinary analysis, processing and implementation

The Internet of Things

Financial technologies and block chains

Audiovisual media, design technologies and social innovation

Smart transport systems

New production processes, materials and energy efficiency

Photonic and laser technologies

Advanced materials and constructions

Flexible product development, production and process management technologies

Strengthening energy efficiency and smart energy solutions

Use of renewable energy sources

Health technologies, biotechnologies and safe food

Safe food and sustainable agrobiological resources

Molecular technologies for medicine and biopharmaceuticals

Advanced applied technologies for personal and public health

Advanced medical engineering for early diagnosis and treatment

Design, development and installation of mobile internet systems

MEMS and MOEMS applications

Determination of enzyme activities by using spectrophotometric method

Recording of FTIR spectra of hard samples

Computational chemistry calculations

Determination of oxidation and reduction potentials by cyclic voltammetry

Microbiological analysis of food products during their production, microbiological analysis of final products and determination of best-before date.

Investigation ofchemical and technological characteristics of fisch products, their raw materials and fishery by-products

Teaching the basics in game development (Unity3D)

Development and research of medical image processing and analysis methods and algorithms

Research of biomedical sensors

Design, construction and research of portable, wireless, wearable physiological monitoring systems and devices

Measurement of time response characteristics of ultrasonic transducer

Measurement of spatial characteristics of ultrasonic transducer

Measurement of ultrasonic transducer pressure level

Inspection of technical condition of medical device electrical safety

Inspection of technical condition of noninvasive blood pressure monitors

Modelling of technological processes by evalution of technological parameters influence on products quality and composition

Development and improvement of new fishery products by enlargde value

Study of applying opportunity of animal origin replacement in fish products production

Microbiological analysis in model food systems

Determination of influence of antimicrobial materials on microorganisms

Determination of total count of aerobic microorganisms in food products

Determination of total count of anaerobic microorganisms in food products

Assessment of influence of microorganisms growth suppressing materials by agar diffusion method and determination of minimum inhibition concentration of antimicrobial materials

Investigation of the Technological Process of making oils and its blends in real and model sistems

Investigation of the Technological Process of Making Emulsion and blends of fats and oils

Investigation and modeling with laboratory equipment of technology of beer, kvass and similar beverages

Technological investigations and modeling with laboratory equipment of mashing and wort production for making beer and similar beverages

The works based on scientific knowledge with the aim to create a new beer, kvass and similar beverage, introduction of new processes or overall improvement of existing processes

The works based on scientific knowledge with the aim to create a new raw materials for making of beer, kvass and similar beverage, introduction of new applications of raw materials or improvement of existing applications

Identification of quality indexes for meat products

Investigation of functional/technological properties of raw materials, fillers and substitutes for meat products

Modelling of technological processes by evalution of technological parameters influence on products quality and composition

Development of new meat products

Study of applying opportunity of animal origin replacement in fish products production

Development of catering products; chemical composition and nutritional value.

Friendly technologies for catering products

Development of natural antimicrobial bioproducts: (i) for health of cereal grains; (ii) for higher value and safety food products and beverages; (iii) for increasing efficiency of bio-detergents production

Development of cereal products and technologies: selection of enzymes compositions, microorganisms and additives for improving the quality and increasing the efficiency

Determination of texture of food products and raw materials using instrumental methods

Adaptation of methods for the instrumental measurements of food texture

Qulity evaluation of cereal raw material

Development of novel rapid methods and techniques for: i) screening of mycotoxins in cereal grains; ii) control of cereals quality during the storage; iii) monitoring of cereals safety online in the production chain

Development of novel innovative computing technologies for better understanding of consumers intentions and behaviour for food products based on multimodal interaction studies between the end product quality criterias

The development of novel rapid methods and methodologies, based on computing technologies, for automatization of food production, and the evaluation of final product safety and quality

Selection of air pollutant measurement techniques and potential applications

Protein qualitative and quantitative analysis using chromatographic and electrophoretic technique

Development of enzyme compositions for improvement of plant product quality and increasing the efficeincy of production

The development and research of Innovative food products (dairy) prototypes

The application of technological operations in order to preserve milk and dairy product quality, extend shelf life and to improve product yield

Feasibility study of the use of various additives in dairy products production

Investigation of synthesis and properties of calcium silicate hydrate and zeolite

Investigation of influence of different additives on the cement and other binders properties, research of utilization industrial waste in silicate materials.

Development of technologies for production of higher value baked goods and beverages (with increased content of dietary fiber and oligosaccharides)

Determination of relations between physico-chemical, sensory and emotion parameters of food products. Development of methods for evaluation of consumer emotions for different food products.

Characterization of polymer composites and evaluation of their technological properties

New modified polysaccharides in purification technologies for industrial effluents

Food components for helthy and safe food and development of industrial technologies

Natural bioactive materials for food safety

Applications of photophysical and photochemical properties of materials

Preparation of packings for protein chromatography

Investigation of self- and photo-polymerisation processes and analysis

Development of organic light emitting diode prototypes

Investigation and analyses of polymer melts, paints, pastes and films by means of dynamic-mechanical methods

Investigation of raw materials, products and manufacturing processes of glass, gypsum, silicate and ceramic materials.

Production technology of various additives, silicate materials, modified binders, glass and ceramic materials and industrial sorbent.

Implementation of new innovative product technologies in building materials and glass industry

Research on factors affecting generation of solid waste

Research on the landfill mining feasibility and properties of deposited waste

Development of technologies for the treatment of mercury and other hazardous materials containing waste

Feasibility and environmental impact assessment of thermal processing of waste

Modelling of membrane and advanced oxidation processes for water and wastewater treatment

Research on technologies for treatment contaminated sites; determination of pollutant concentration in soil and selection of treatment techniques

Particle size distribution measurements in fuel combustion units

Research and development of measurement methods for complex pollutant formation in industrial processes

Efficiency testing of filtration materials and air filters

Formation of nanofibre layers by electrospinning for air filtration applications

Scientific and technical services, based on instrumental measurements of chemical processes and engineering calculations

Milk and liquid food products thermal treatment (pasteurization, sterilization, UHT-treatment)

Milk and liquid food components concentration by ultrafiltration

Milk and liquid food ingredients concentration by spraying (Spray-dryer)

Milk and liquid food products drying by sublimation (sublimator, till 5 kg/day)

Milk and liquid food products homogenization

Milk separation

Butter and other spreads churning (till 10 kg)

Fermented products and melted cheese production

Cheese prototypes production

Analysis of porous food systems by using acoustic method

Sensory analysis of food products and acceptability evaluation by using FaceReader programme

Application of advanced oxidation processes towards the decomposition of air pollutants in ventilation air

Development and testing of indoor air cleaning equipment

Assessement of microbiological pollution of water, air, and waste

Environmental impact assessment of industrial processes via life cycle assessment

Research and development of NPK fertilizers, complex characterization and technological recommendations

Production and analysis of NPK fertilizers

Analysis of water-soluble film coating technologies for various solid substances

Metal corrosion in different mediums and their protection, corrosion activity of water

Selection of enzymes for plant material processing

Selection of microorganisms cultivation conditions

Determination and evaluation of cereal quality parameters

Quantitative analysis of proteins by using ion-exchange chromatography

Determination of protein molecular mass and isoelectric point by using electrophoresis

Determination of lactic acid L/D isomers and total content

Evaluation of quality of baked goods and other cereal products

Baking tests of breads and flour confectionary products

Development of formulas for baked goods and other cereal products

Determination of zeta potential of particles in aqueous dispersions

Investigation of pasting properties of starch derivatives

DSC measurements, investigations of materials phase and physical transitions

Thermogravimetry measuremts with FTIR detection.

Recording of luminescence spectra of solutions and hard samples

For determinastion of melt flow rate of thermoplastics

Freez-drying of materials

The measuremnts of ionisation potencial of organic materials, measuremnts of work funtion of metals and inorganic semiconductors

Investigation of charge transport properties of organic semiconductors

Rheological tests in rotational and oscillatory modes. DMTA analysis of soft films, fibers, polymer melts. UV curing experiments. Detection of phase transitions by dielectric spectroscopy.

Purification of organic materials by "flash" chromatography

determination of polymers molecular masses (Mn, Mw, Mz) and polidispersity

Formation of organic light emitting diodes

Wetting angle and surface energy determination of solid samples

Determination of phase transitions and destruction temperatures of organic materials

Investigation of self- and photo-polymerisation processes and analysis

Determination of molecular mass of organic materials by chemical ionisation

powder,liquids, thin films X-ray analysis

Qualitative, quantitative and non-standard measurements of elements

measurement of particle size distribution in solid and liquid systems

measurement of heat flow of processes

powder,liquids, thin films X-ray analysis

Qualitative, quantitative and non-standard measurements of elements

measurement of particle size distribution gaseous systems

Modeling of activity based costing systems

Research of assurance of social reporting (social audit)

Research on corporate social reporting volume and quality of information

Study of innovative time-based cost accounting system implementation

Study of corporate social responsibility and accountability implementation

Feasibility study of marketing communications of the company

Researches of of marketing communication efficiency

Business development in rapidly growing unstable markets methodology of control

Business process reengineering adapting the business model of fast-growing unstable markets

The cascade model for rapid business growth control

Business process design and management solutions for individual business growth stages

Young global technology business development methodology preparation

International Marketing decisions

Studies of entrepreneurial marketing decisions implementation

Modelling of customer decision making

Young global technology business development methodology preparation and adapting to a particular sector/company profile and preparation of development strategy

Strategic audit methodology for Start-ups and emerging businesses

Strategic Business Transformation Modelling

A staged business transformation feasibility study using a phased model

Open Innovation processes in theoretical modeling and implementation of algorithms for business creation

Open innovation development model for a particular business segment / product group application

Integrated business model of innovation generation methodology

The development of a business model for a particular business maturity / industry segment

Feasibility study of business model innovation in the development

Investor Relations and Corporate Governance and Development Methodology: venture capital and other investors integration in the business growth model

Corporate investment relations and communication management method development for individual stages of business development

Next Generation Access Internet Infrastructure Development in Eastern and Western Europe, the analysis of trends on methodology

Business model analysis and hypothesis testing research

Application of information technology solutions to business problems or the implementation of innovations in the enterprise technical feasibility study

Innovative capacity of the organization and culture of innovative diagnostic methods and competence modeling methodology

Innovative organization abilities diagnostic and development system creation

Innovative organizational development feasibility study and scenario preparation

Global R&D management methodology for knowledge-intensive firms

Business development possibilities, projection of innovative business models, design of management structure and systems, etc.

Complex software system design and creation

Feasibility study of change and /or innovation management systems implementation.

Research on simultaneous inginering application in the context of new product development and introduction to the market.

Feasibility study on human resource management practices empowerment

Company management architecture research and construction of innovation acceleration models.

Feasibility studies of management systems transformation.

Feasibility study of business diversification opportunities.

Feasibility studies of company`s value chain re-engineering.

Feasibility study of business innovation performance effectiveness improvement.

Feasibility study of business development acceleration.

Application possibilities for sustainable development assessment methodology in the organization.

Research on organisational virtuality (virtual communication, virtual teams, virtual workplaces, virtual organisations)

Evaluation of internet decisions emotional impact

ICT using in business digitization: study of feasibility

ICT using in social business: feasibility study

Crowdsourcing using in company activity processes: feasibility study

Energy-saving tendencies in the household

Technological implementations of algorithms for multimedia signal processing

Applied research of parking sensors and systems

Technical feasibility studies of apliement of interactive sensoring systems

Technical feasibility studies of electronic systems apliement for medical devices monitoring and management

Development of measurement systems, automation of calibration and verification procedures (hardware and software)

Applied research of ultralow power wireless monitoring and control systems

Applied research of cloud computing services and infrastructure

System for remote instalation control of the fiber-optic access networks (study)

Electronic systems simulation, design and research

System for remote control of the fiber-optic access networks (software tool)

Mobile objects remote control system (software tool)

IT infrastructure audit and recommendations for improving and feasibility studies.

Development and efficience studies of cloud computing services in mobile environments

Development and research of geolocation methods for providing specific services

Development of Ad-Hoc mobile network communication methods and research of their applicability

Development of Ad-Hoc mobile networks and services for specific target user groups

Development, improvement and research of information system methods related with MDD, MDA, SOA

Creation of 3D graphics material

Research of business process and business rule modelling, specification method and their application in information system projects

Improvement of CASE tools, development of information system design technologies

Development and improvement of business process and business rules modelling and specification tools and technologies

Miscelaneous information system, database, service and software package development services

Feasability studies of information systems development

Feasability studies of ontology and semantic information system development

Automated testing of complex software systems

Research, development and improvement of software and hardware quality assurance methods

Research of complex software system (mobile distributed, Internet of Things, internet service) development and design

Development and adoption of automated testing tools for software development process

Development of complex software systems

Adoption of testing and automated testing in the software development process, Feasability studies of testing

Research of software architectures

Feasability studies of software systems

Feasability studies of cloud computing service solutions

Teaching in 3D printing

Creation of 2D graphics material

Creation of 2D videos and animations

Optimisation of resource distribution, algorithms and calculations. Practical implementations and methods

Creation of e-learning materials

Creation of interactive e-learning materials

Creation of materials for distant learning

Implementation of Lithuanian language speech recognition systems in end user applications

Development and modeling of interactive multi-modal user interfaces

3D printing and processing of 3D models for 3D printing

Software and hardware integrated system quality assurance method creation and evaluation

Design and implementation of smart environments, internet of things.

Applied research on software quality and its assurance processes. Software quality.

Material treatment effectiveness investigation and implemantation

Stereoscopic virtual tour creation for the devices supporting "3D" vizualization technology

Optimisation and management solutions for Audiovisual production broadcast systems.

Optimisation and management solutions for audiovisual production workflow processes.

Production of Audiovisual material.

Programming of various tasks in C language

Programming of various algorithms in Java, C, C languages

Development and installation of e-publishing systems

Teaching the basics of development of mobile apps (Android and Windows Phone)

Programming of various tasks in Pascal language

Consulting in solving of the (technical) optimization problems

Analysis of parameters used in x-ray diagnostics

Application of Raman spectroscopy methods for assessment of structural properties of materials

Observation of reaction in real time

Applications of plasmochemical technologies: etching of elementary and complex semiconductors, dielectrics and conductors in active gas plasma

Creation of acoustic measuring methods for materials` physical properties, consulting

Creation of acoustic streams` measurment methods, consulting

Measurement of materials` properties by applying linear and nonlinear ultrasound waves in solid bodies, modelling of measurements; consulting

Modelling of stochastic systems by Markov processes

Creation, realization and implementation of cryptographic algorithms

Applications of plasmochemical technologies: amorphous carbon and diamond-like carbon films`, nanostructures` and hidden layers` forming and investigation

Research of cryptographic systems

Uncertainty and sensitivity analysis of modelling results

Application of data mining methods in various areas

Development and application of statistical data analysis models

Mathematical modelling of technological processes

The quality evaluation and technology development of consumables (garments, footwear, haberdashery and etc.).

Vibrational cutting means design and implemantation

Cutting of hard and brittle materials

Simulation, vibroisolation and mode excitation

Perfection of technological processes control

Agricultural and household waste using for energy production

Fuels (oil, gas and biofuels) systems research.

Fuel combustion and other energy properties research

Compressor analysis and numerical simulation

Solid recovered fuels using for energy production, emission reduction of flue gas using different biofuels and sewage sluge mixing ratio

Qualitative evaluation of printing plates of different printing ways

Researches of packaging materials, packaging technologies, packaging waste management technologies, development and testing of models and prototypes.

Life cycle assesment and environmental evaluation of packaging

Implemantation of quality development methods

Acceleration of technological processes, job efficiency increase

New product development, equipment design

"Smart "tools development

Development of human hieling and activity assesment devices

Development of non traditional diagnostic methods of human blood circulation

R&D of vibration energy harvesting devices

Modeling and testing of macro/micro/nano transducers with integrated smart materials

Multiphysics finite element analysis of mechatronic devices

Development of effective mechanical treatment methods. Design and redesign by using 3D scanning and Solid Works software

Strenght and durability of machines and structures

Mechanical systems design, redesign and revers engineering

Arrangement of technical proposals and possibility studies, situation assessment

Numerical modelling

Difraction efficiency measurements of periodic microstructure and estimation of geometric parameters using developed numerical-experimental method

Metallographic analysis of structural materials

Feasibility study on the application of high-frequency vibrations, improving technological processes

Numerical modelling of cutting processes

Simulation of computer-generated holograms on the basis of 2D digital photos

Development of computer aided process planning systems

Development of innovative products and processes, analysis of their cots, value and productivity in an early stage of development

Development of computer aided coating process and resources planning systems

Development of computer aided manufacturing resources planning systems

Design of heating systems and district heating substations

Tribological analysis of elements a and materials, development of methods for reliability improvement

Development of new products and technologies applying rapid prototyping

Testing of professional and casual footwear, results evaluation.

Development of computer aided manufacturing engineering systems

Technical expertise of technological lines and other technological systems in accordance with the functionality, reliability, durability, bandwidth, and other criteria

Multifunctional polymeric materials and products creation, investigation and evaluation.

Innovative product design market research, analysis and evaluation

Innovative product design concept research and development

Exposition and public interior design concept research and development

Innovative brand concept research and development

Innovative design products and service market research and development

Milling and ShopMill programing

Strength and durability investigation of machines and structures

CNC machine programming and control workshop

Identification of technical and biological systems vibration and acoustic processes

Condition monitoring and diagnostics of machines, machinery and their constructional elements.

Machinery and equipment vibration measurements in accordance with the standards LST ISO 10816-1:2003, LST ISO 10816-2:2010, LST ISO 7919-1:2003, LST EN 60034-14:2004

Measurement and evaluation of human exposure to hand-transmitted vibration in accordance with the standards LST EN ISO 5349-1:2002, LST EN 28662-1:2001, LST EN ISO 28927-5:2010.

Environmental testing in accordance with the standards LST EN 60068-2-6:2008 (sinusoidal vibration), LST EN 60068-2-64:2008 ( broadband random vibration ), LST EN 60068-2-27:2009 (Shock).

Sound power levels and the various devices and mechanisms of noise mapping LST EN ISO 9614-2:2002

Measurement of mechanical quantities (displacement, force, pressure)

Researches of physical - mechanical characteristics of printing and packaging materials

Measurement of anthropometrical parameters, muscles electrical activity, 3D motion capture and analysis

CAM Modelling SolidWorks

Determination of water penetration, absorption and desorption of cardboard, bonded nonwovens and leather according to the standards LST EN ISO 2044, LST EN 13518, LST EN ISO 5403, LST EN SO 5404, etc.

Metal, dielectric, semiconductor thin films: deposition by vacuum, plasma and ion assisted methods and investigations

Determination of water vapour permeability and absorption of leather, plastics, films and laminates according to the standards ST EN ISO 2044, LST EN ISO 14268, LST EN ISO 17229, etc.

Appliance for testing the colourfastness to the wiping and determination of abrasion resistance of plymeric materials

Innovative materials and structures research in physical and chemical materials analysis

Determination of mechanical properties of leather, textile, rubber, plastics and rubber and plastics covered materials at tension, compression, bending and tear according to standards LST EN ISO 2044, LST EN ISO 3376, ISO 37, LST EN ISO 3377, LST EN ISO4647, LST EN 13571, LST EN ISO 527, LST EN ISO 604, LST EN ISO 178, LST EN ISO 13335, etc.

Determination of profesional footwear and its protection resistance against various external factors (penetration, compression, impact) according to the standards LST EN ISO 2044, LST EN ISO 20345, LST EN ISO 20346, LST EN ISO 20347 ir LST EN 12568.

Determination of adhesion strength od natural and synthetic polymers

Measurement of slip coefficient of friction according to LST EN ISO 13287; LST EN ISO 20344

Determination of electrical resistance according to LST EN ISO 20344

transient absorbtion measurement

Diamond like carbon: synthesis and investigations

Langmuir-Blodgett technique

Semiconductor surface passivation

Analysis of optical properties

Analysis of materials with Raman spectroscopy

Device for roughness measurement of mechanical surfaces

Investigations of electrical properties

Device for replication of holograms

Ni electroplating

scanning electron microscopy

Investigation of microhardness and other micromechanical properties

Noise meter verification

Investigation of characteristics of ultrasonic transducers

Feasibility study on e-services delivery

Analysis of e-government, policy discourse and democracy

Applied research of social and technological innovations

The technical condition expert evaluation of buildings

The development, structure modelling and investigation of special purposes concrete

ASR investigations according to the Alkali Guide Line

Location of hidden construction structures, e.g. wooden framework under plaster in half-timbered houses

Non-autoclaved insulating concrete research

Research on Media Accessibility

Zeolite synthesis and the use of cement systems research

Researches on continuous concreting of massive monolithic constructions

Researches on building of reinforced monolithic concrete structures using sliding formworks

The quality investigations of construction materials used for building finishing

Research of the actual construction of technological, organizational and economic processes and orient to the performance of construction work efficiency.

Hydrotechnical constructions on clay ground stability assessment

Clay slope stability assessment

Innovative technological and organizational solutions for the construction process.

Heating and ventilation systems` effectiveness surveys

Development and testing of control and performance of HVAC systems

Building materials and structures research. Aggregate testing.

Building materials and structures research. Concrete products and research.

Building materials and structures research. Brick masonry, research.

Building materials and structures research. Paint tests.

Building materials and structures research. Wood research.

New generation of the concrete mixture compositions creation.

Structural Design of engineering structures, analysis of strength and stifness of load bearing structures, strengthening of structures

The research and test of engineering structures mechanical properties

Dynamics of structural systems. Investigations and analyse of structural systems ans identification, diagnostics, estimation and prediction of its state

Innovative concrete mixtures, construction and installation of new building products, using local recyclables and Development Studies.

Hydrotechnical constructions on clay ground stability assessment

Clay slope stability assessment.

Analysis of concrete additions and admixtures

Cement mortar or concrete mixtures, viscosity studies using laboratory equipment BTRHEOM

New generation of the concrete mixture compositions creation.

Special-purpose concretes development and research.

Building products and construction defect expert assessments. Quality of building materials.

Fractal analysis of urban structures

Special-purpose concretes development and research.

test og bending structures

Tensile test of reinforcement bars

Rebar corrosion evaluation of the possible

Rebar diameter, location and measurement of the protective layer

High precision temperature measurement of monolithic structures (mass concrete)

Ultrasonic defectoscopy (defects, cracks, gaps, etc.)

Electronic moisture measurement in different materials and surfaces

Frequency and amplitude analysis

Infrared thermography

Concrete strength by ultrasonic method

Steel reinforcing fiber content and orientation determination in fresh and hardened concrete

Concrete additions (silica fume, fly ash)

Pseudo adiabatic calorimetry with concrete

The establishemnt of cured concrete compression strength using elastic bounce method

Building materials and constructions research. Aggregate testing.

Building materials and constructions research. Building cement mortars research.

Building materials and constructions research. Concrete products and research.

Building materials and constructions research. Brick masonry, research.

Building products and construction defect expert assessments. Quality of building materials.

Single crystal X-ray diffractometer

Building materials and constructions research. Paint tests.

Building materials and constructions research. Wood research.

Chemical and mineral admixtures on the properties of cement products research, local industrial waste disposal systems, cement research.

Innovative concrete mixtures, construction and installation of new building products, using local recyclables and Development Studies.

The temperature measurements in the massive monolithic concrete

Dynamic investigation of mechanical, optical and other systems using non-contact techniques

Feasability studies and expert evaluation of technological solutions or development tools for information system development

Social analytics

Feasability studies of applicability ofbusiness process and business rules modelling and specification methods in information systems development

Design and implementation of heuristic optimization algorithms (with the emphasis on the development ofgenetic algorithms)

Consulting in optimization algorithms issues

Teaching in 3D scanning

Formation and investigations of Schottky and ohmic contacts

Analysis of failures, errors or longevity data

Software dedicated for mobile devices design, implementation and testing

Scanning of 3D objects and 3D model building from scanned materials

Deposition and investigations of the antireflective films

Dried sewage sludge and other wastes energy performance testing, research of emissions reduction by burning sewage sludge and biofuel blends

Calibration of measurement instruments and systems

Smart user interfaces application feasability studies, design and implementation

Development of Speech server based self-service applications

Investigations of piezoresistive properties

Interactive virtual tour creation for websites, terminals, mobile devices and smart TVs

Testing of fuel cell components ant other dielectric materials using imedance analyzer

Diagnostic tests for assessment of mathematics progress in primary education

Harrdware and Software solutions for audiovisual technologies. Design, Implemetation, Maintenance.

Measurement of spatial and acoustic pressure parameters for therapeutic ultrasound devices

Inspection of technical condition of electromagnetic wave heating devices for bio-tissue (physiotherapy)

Inspection of technical condition of ultrasonic heating devices for bio-tissue (physiotherapy)

Inspection of medical ultrasound scanners for estimation of imaging deph, geometry, slice thickness, beam focusing, contrast sensitivity using ultrasonic phanthoms

Development and research of multimodal biomedical signal processing methods and algorithms

Research of ultrasound medical diagnostics and therapy methods and devices

Investigation of surface morphology.

Investigation of optical properties in liquid and on transparent/not transparent substrate

Investigation of dry/liquid sample using Surface Enhanced Raman spectroscopy (SERS)

Enzyme reaction kinetics; enzyme activity determination

Novel technologies of bread and confectionery products, baking experiments, recommmendations

Deformation investigation of mechanical, optical and other systems using non-contact techniques

Development of technologies for bioethanol production from plant biomass

Applications of biopolymer nanomaterials in packaging production

Nanosized polysaccharides for healthy and safe food and development of their industrial technologies

Characterization of polymer molecular masses and polidispersity

Synthesis and characterisation of organic semiconductors and other electroactive materials

Development of environmentally clean leather processing technologies

Research on the composition and properties of municipal and industrial solid waste

Design of waste generation forecasting models

Preparation of waste menagement plans and their strategic impact assessment

Feasibility studies on the application of water treatment technologies

Research on ambient and indoor air quality, building microclimate

Air quality management, optimization of industrial proceesses based on pollutant formation, development of new methods for the minimization of air pollution

2D and 3D drawings in AutoCAD drawing program

Production and analysis of liquid fertilizers

Training of engineers with other specialties in the field of fertilizer engineering

Chemical and electrochemical treatment of metal surface and their deposition

Steady-state and time-resolved emission measurements

Mathematical modelling of financial markets

Analysis of pension funds performance

Geopolimer concrete development and research

Researches on concrete surface quality and defects of monolithic structures

Risk and uncertainty analysis

The assessment of installing monolithic floors and their on-top coatings

Construction cost (estimate calculations) of expertise, organizational and technological projects.

Thermal imaging surveys of building envelopes and HVAC systems

Building materials and structures research. Building cement mortars research.

Chemical and mineral admixtures on the properties of cement products research, local industrial waste disposal systems, cement research.

Determination of dynamic Young’s modulus

Determination of autogenous and drying shrinkage in different storage climates

The measurements of surface humidity of construction materials

Research of development of ontology and semantic information systems, semantic Web Services, and integration of information resources

Development and improvement of ontologies and semantic information system development technologies and tools

Teaching of work in AutoCAD

Modeling and simulation of physical behaviour of engineering structures and systems by employing the finite element method and software

Business processes IT services reliability, bandwidth, and security evaluation using simulation models

Prototyping of Cloud computing solutions

Creation of 3D videos and animations

Implementation of video processing algorithms for the solving of practical tasks

Data visualization methods, visualization of given data arrays by a given format and specification

Implementation of foreign language speech recognition systems in end user applications

Development of multi-modal interfaces and assistive utilities for socially dependent and disabled people

Emission testing and reduction in combustion products

Effective using of thermal energy

Refrigeration and heat pump system analysis and numerical simulation

Biofuel and other fuels energy study

Smart, energy saving technologies research, development and feasibility studies

Development and investigation of decission support systems for technological process control

Design and research of ultralow power wireless monitoring and control systems

Design and research of interactive sensoring systems

Applied research of medical devices monitoring and management

Technical feasibility studies of wireless systems for monitoring and control

Measurement parameters of LED bulbs and reaearch of energy efficienty

Design and research of medical devices monitoring and management

The study of corporate social reporting disclosure in terms of the needs of stakeholders

value chain, cost manahement, activity based costing

Testing and metrological evaluation of electronics and measurement systems

Development, research and feasability study in the field of IoT networks for precission agriculture, energy resources consumption and parameters monitoring

Design and research of automated soil properties investigation systems

An analysis of possibilities for enterprise activity optimization by means of LEAN system (study)

Development, research and feasability study in the field of energy efficient electronic systems

Remote mobile unit control system (study).

Control system for enterprise activity according to the LEAN system (software tool)

Feasibility study by the textile field of applied scientific research and experimental development work area.

Technical audit of medical devices, feasibility studies of new diagnostic, therapy methods and devices

Applied research of interactive sensoring systems

Applied research of automated CPT systems

Development of thermal processing and metal casting technologies

Static, kinematic and dynamic analysis of the mechanical and biomechanical systems or their elements under the constant or variable force, kinematic, thermal etc. loading. Optimization of structures with regard to the mass, strength and other structural parameters or from ergonomic point of view. Computational gas or fluid flow analysis (external and internal flows).

Computer aided modeling, skaitinė analizė naudojant pažangius kompiuterinius trimačio geometrinio modeliavimo, baigtinių elementų analizės metodus ir naujausią specializuotą bei universalią CAD/CAE programinę įrangą.

Sound pressure and sound power levels measurements in accordance with the standards LST EN ISO 11201:2010-09;LST EN ISO 11202:2010-09;LST EN ISO 11204:2010-09, LST EN ISO 3744:2011; LST EN ISO 3746:2011, LST EN ISO 9614-2:2002

3D Motion capture and analysis

Applied research and solutions on electronic health (eHealth) and clinical decision support systems

Preparation and deployment of employee motivation systems.

Implementation of packaging material minimization and packaging optimization methodologies in industry, seeking to meet requirements of EU and national legislation and harmonized standards

Innovative product design prototype research and development

Innovative design product and service marketing concept research and development

CNC machine tool programming, training of operators.

Monitoring systems, technical information systems

Analysis of dynamics of rotary systems and diagnostics, failure prevention

Development of diagnostic methods, algorithms, and programs for mechanical and electromechanical devices functioning.

Modelling of Continous and Discrete processes

Smart mixtures production control systems for building materials production

Formalization and solution of process optimization tasks

Radio network coverage calculation, site determination, main radio parameters calculation

Specialized applications creation (Feasibility Study)

WiFi access cyber sequrity control system

WiFi access cyber security research

Control solutions and expertise of electrical wheel chairs

Technical studies of Industrial control systems, security, development and implementation of feasibilities

Preparation of technological documentation

System solutions and expertise of human face tracking and recognition

Eye tracking systems for disabled people and expertise

Detection of the partial discharges and estimation of the fault zones in the transmission lines and transformers

Simulation of rotating magnetic field equipment

Research os low frequency electrmagnetic fields

Feasibility studies to evaluate possibility of embedded systems application for evaluation of transport system dynamic characteristics

Development, research and feasability study for creation model for odontology pulsoximeter with probes

Research and development of ultrasonic measurement/imaging systems

Research and development, feasibility studies, consultancies of glucometry systems

Research and development, feasibility studies, consultancies of ultrasound application in food/agriculture safety systems

Solid state lighting driver electronics research, development and feasibility studies

Signage systems for transport research, development and feasibility studies

Signage systems research, development and feasibility studies

Remote visual registration systems and expertise

Household waste and special biological and physical-biological treatment and / or compaction technology research and development

Research and creation of innovative cosmetic prescriptions

Drinking water quality testing and management, water treatment technology research and development.

Ultra high performance concrete development and research

Electronic products testing and calibration systems, applied research and prototyping

Quality assessment of the electronic systems

Inovative maintenance system for vehicle park (study)

Car brake quality control system

Smart lighting control system with long-range RF encrypted communication nodes

Accounting system for electronic component resource control (software tool)

Inovative maintenance system for vehicle park (software tool)

Optimization and optimal control of technological processes (chemical, biochemical, food production, energetics, etc.)

Contactless measurement of obect parameters from visual information

Modelling, Optimization and Control of Biotechnological processes

Development of effective power supplies and their control methods for high power LEDs

Development, research and feasability study in the field of high performance embedded systems

Innovative alcohol level measuring device prototype

Object detection and tracking from 2D or 3D images

Design, development, feasibility studies of the data and signal acquisition systems

Specialized embedded systems for mechatronics products (machinery, equipment, control of technological processes, quality control systems). Prototypes and production documentation.

Expert forecast of solutions (project implementation) efficiency

Public transport service quality evaluation based on vehicle dynamic characteristics tests

Control system for efficient operation and maintenance of residential building (software tool)

Control system for efficient operation and maintenance of residential building (study)

Insulated heat distribution pipes monitoring systems

Enhancement of effectiveness of modern high power LED lighting and LED power supplies

Technical features and solutions to design access network and provide services in the regional frequency band (the stydy of technical-technological feasibilities)

Telecommunications and computer-systems design, programming and development (feasibility studies, experimental development, research)

Development of traffic operational adjustment (control) methods and software

Research and development, feasibility studies, consultancies on sonoporation systems.

Research and development, feasibility studies, consultancies on ultrasonic transducers/arrays quality validation systems.

Research and development of smart biomedical ultrasonic systems

Human gesture recognition research

Laser interference lithography (LIL), hidden image holograms, 2D-3D holograms, rainbow holograms

Design, construction and research of portable, wireless, wearable physiological monitoring systems and devices

Design, construction and research of charging stations for electric vehiles ('SmartChargeBox')

Applied research in detection of internal defects and determination of physical and mechanical properties and their change in materials, using non-destructive ultrasonic methods for materials characterization, diagnostic and measurement

Robix Rascal robotics kits for teaching

Applied research in ultrasonic non-destructive testing to prevent accidents in oil and gas industries, transport (railways and bridges), energy (nuclear, thermal, water and wind), aviation and space sectors

Non-destructive testings using X-ray microtomograph

Preparation of company standards, of methodics for verification and calibration

Electrostatics experiments

A feasibility study on monitoring and evaluation system implementation of human movements and biological parameters via wearables

Modeling integration of quality, environmental and occupational health and safety management systems

Vibration resistance tests

Feasibility study by the plastic materials, leather and their products field of applied scientific research and experimental development work area.

Value chain, cost management, activity based costing

Performance measurement, performance measurement system, balanced scorecard, strategic control

System Vehicle / Driver / Environment Element Interoperability Models

Research related to information systems, databases and analysis of operational processes

Determination of aerodynamics and flight dynamics of aircraft and unmanned aerial vehicles (UAV)

Design and development of system for monitoring and evaluation of human movements and biological parameters via wearables

Research of the system for monitoring and evaluation of human movements and biological parameters via wearables

Design and development of the innovative e-logistics and e-document system

The use of algae in energy and the production of third-generation biofuels

Research on an innovative e-logistics and e-documents system and its processes

Industrial plant energy audits

Strength analysis, simulation and experimental studies of composite and metallic structures.

Research and development on equipment electromagnetic compatibility

Optimization of heat supply networks

Development of measurement systems, technologies, methods and supervision procedures for various metrological tasks

Reliability theory application

Innovative research of time and cost accounting integration in the context of increasing companies competitive advantage

Modelling of extreme phenomena and events

Space Syntax analysis of urban structures

Branding decisions while creating value for customers

Development of smart tools for information integration

Applied research of control systems of technological processes

Design and research of trafic management systems

Research of dynamics and energy efficiency of vehicles with alternative fuels and hybrid power plants

Research, development and modernization of refrigeration and heat pump systems and its components

Textile material characterization, production optimization of process parameters as well as new construction textile materials.

Studies on the physical-mechanical properties of various polymer materials (plastics, rubber, leather, soft laminates, polymer composites).

Feasibility study on the development of new textile technologies and materials

Solutions for verification of measurement instrument software/firmware

Study of technical feasibility of development of new measuring instruments and systems

Investigation of the reliability of an automatic system and its impact on the operation of the electrical grid

Creating a methodology for rapid potential equalization of the battery

Architectural design

Diagnostic X-ray radiation parameter optimisation, decreasing patient irradiation

Construction of phenomenological model, describing processes on surface layers during reactive ion etching, thin film deposition, catalysis reactions, etc.

Development of innovative transport systems for logistics centers

Research on leadership development at individual, group, organizational levels

Research of Modern English Didactics

Technical applications of sensors and fiber optics, assessment of their technical properties; applications of sensors, fiber optics and interferometers in measurement equipment

Optical microscopy

Development models for statistical data visualization

Research on impacts between language and technology

Investigation of surface roughness

Holography, holographic optical measurements, coherent measurements

Analysis of mechanical, structural and other properties of materials, material formations and components

Forming materials with needed properties for applications in hydrogen power engineering by synthesizing material coatings

Preparation of methodology in patient irradiation lowering in digital x-ray diagnostics

Nanocomposite film forming and property investigation, forming transparent and electrically conductive thin films, thin film forming technologies and property investigation (protective - hard coatings, transparent electrodes, ion conduction layers, ferromagnetic coatings, film deposition by evaporation in vacuum, magnetron deposition, evaporation by electronic beam, reactive deposition), modification of thin film properties by laser irradiance and thermal heating methods

Applications of plasmochemical technologies: selective etching, etching anisotropy, surface layer`s elemental structure change, inhibitor formation and use, hidden layer formation

Assessment of materials` optical properties

Applied analysis of nonlinear dynamical systems

Translation, postediting and subtitling quality research and assessment

Software, webpage and game localization

Monomers, polymers and their composites from renewable resources

Design thinking as learning innovation in Academia and Business/Public Sector

Modeling of public services provision process, digitization of the service

Public services quality assessment and solutions for public services quality improvement

Development of concert recording editing methodology

Translation problems: analysis and research

Research on the learning strategies

Applied research on non-governmental organizations and communities, public participation and citizen science

Research of Lithuanian music digital scores publishing

Contrastive studies of English and Lithuanian

Edit and restoration of old sound recordings

Research on employee learning needs and competence development

Technologies for preschool children's health competence development

Methodological solutions for social research

Evaluation and/or development of organization’s social responsibility

Development of the strategy of society inclusion to public policy decision-making with the design-based thinking methodology

Exploratory survey data analysis (EDA) and structural equation modeling (SEM)

Training on the topics of the EU functioning

Research and development of microsystems

AFM: Atomic force microscopy

Scientific glassblower services

Laser microfabrication

Optical lithography

Quantitative and qualitative surface analysis using X-Ray photoelectron spectroscopy, ion scattering spectroscopy, reflection electron energy loss spectroscopy, angle Resolved XPS (ARXPS) with Ar ion surface eching/cleaning possibility

Development of production process control algorithms and simulation

Characterization of molecules and mixtures

Laser ellipsometry

Technical feasibility studies for creating methods and systems for new non-destructive testings, certification and development of standards

Prototyping of ultrasonic quality control systems, for monitoring the technological operations during the manufacturing process

Creation of ultrasound transducer prototypes for medical and technical diagnosis

Kaunas University of Technology

Company code 111950581

VAT reference number LT119505811

Address K.Baršausko g. 59 - A448, LT-51423 Kaunas

Phone: +370 (672) 65 146

E-mail: nivc@ktu.lt

© Kaunas University of Technology