Tribological analysis of elements and materials, development of methods for reliability improvement

Description:
Tribological analysis of elements and materials, development of methods for reliability improvement Tribological analysis of elements and materials, development of methods for reliability improvement Tribological analysis of elements and materials, development of methods for reliability improvement

Research on shrinkage of textile fabrics after washing

Description:
The washing test is carried out according to the standard test method EN ISO 6330:2021, in a domestic washing machine. The shrinkage of textiles after washing is measured in the longitudinal and transverse directions after each washing and drying cycle. It is possible to test after multiple washing-

Development, research and evaluation of multifunctional polymer materials and products

Description:
Development, research and evaluation of multifunctional polymer materials and products. Development, research and evaluation of multifunctional polymer materials and products. Development, research and evaluation of multifunctional polymer materials and products. Development, research and evaluatio

Developing new materials and products from manufacturing waste

Description:
Research into industrial waste, by-products and secondary raw materials to identify practical uses. We develop and test prototypes of new materials, semi-finished materials or products from the client’s waste streams.

Synthesis of organic semiconductors, in particular for energy saving and generating technologies

Description:
Synthesis and identification of organic semiconductors that transport or generate positive or negative charges. Main application area is optoelectronic devices (organic or hybrid solar cells, organic light emitting diodes, field effect transistors).

Measurement of Surface Roughness

Description:
Surface roughness measurement service designed to assess the quality of machined surfaces and the stability of technological processes. Measurements are performed by contact profiling using the GARANT ST1 profilometer, determining the main microgeometric parameters and surface topography features.

Research on the Strength, Stiffness and Durability of Materials and Structural Elements

Description:
We conduct research on the mechanical properties of materials and structural elements, assessing strength, stiffness and durability. We apply tensile, compression and bending tests, cyclic loading and fatigue analysis. We use NS PAS hydraulic station and KAL force transducers.

Purity and structure determination of compounds

Description:
To fully elucidate the structure of organic compounds, techniques such as nuclear magnetic resonance (NMR) spectroscopy, high-resolution mass spectrometry (HRMS), and mass spectrometry (MS) are applied.

Examination of Parts, Workpiece Structure, Internal and External Defects

Description:
Microstructure/defects of metal parts, workpieces are examined by metallographic microscopy using an Olympus BX41M with a digital camera. Internal/surface defects are identified, homogeneity of structure, phase distribution, influence of technological processes on material properties are assessed.

Research on glass fiber composites

Description:
We perform mechanical property and strength testing of glass-fiber-reinforced composites. We evaluate tensile strength, deformation, stiffness, and failure characteristics. Testing can be performed in accordance with ISO 527-4:2023 or ASTM D3039/D3039M standards.

Tensile tests of polymeric materials

Description:
We perform tensile testing of various polymer materials. We determine tensile strength, elongation at break, tensile modulus, yield strength, and other mechanical parameters. Testing can be performed in accordance with ISO 527-1:2019, ISO 527-2, or ASTM D638 standarts. Test loads range from 10 N to

Materials physics laboratory

Description:
Interactive laboratory work in materials physics, allowing practical exploration of the properties of materials and the effects of physical phenomena using educational laboratory equipment.

Feasibility study in the field of applied research and experimental development in the textile sector

Description:
A feasibility study is being conducted in the specific field of textile material research, application, or the development of materials with new functional properties, alongside an analysis of the company's capacity to manufacture a new product or material.

Consulting and training in surface processes and advanced materials technologies

Description:
Expert consulting and training on surface processes, thin films, nanostructures, and catalysis, supporting the development and application of advanced materials technologies in industry and business.

Modelling and calculation of 2D and 3D surface structure formation processes

Description:
Modelling and calculation of 2D and 3D surface structure and roughness formation processes for optimisation of micro- and nanotechnology, semiconductor, and functional surface applications.

Research on synthesis and application of synthetic, natural and modified polymers, composites and nanomaterials

Description:
Design, synthesis and testing of materials based on natural, synthetic or modified polymers for fibre engineering, pharmaceutical industry, production of cosmetics and hygiene products, packaging materials, bioplastics and biocomposites as well as in water treatment.

Application of plasmochemical technologies

Description:
Plasmochemical technologies are used to form amorphous carbon and diamond-like carbon coatings and create nanostructures. This service allows you to obtain surfaces with specifically controlled tribological, optical, barrier, or protective properties, suitable for high-value-added products and proto

Studies of rheological and thermomechanical properties of polymeric materials

Description:
Measurement of rheological and photorheological characteristics of polymeric materials using the oscillatory shear and tensile tests. Studies of viscosity, dynamic mechanical thermal analysis, phase transitions and curing processes of polymeric materials.

Research on textile fabrics characteristics

Description:
Testing the properties of various textile materials (woven, knitted, non-woven and others): determination of resistance to abrasion and pilling and pilling (Martindale test), determination of strength properties, testing of air and water vapor permeability.

Biodegradability testing of materials

Description:
Aerobic degradation of polymer materials is studied in a model liquid medium by determining degradation kinetics and biodegradability based on biochemical oxygen demand

Study of mechanical properties of polymeric materials

Description:
Tensile and compression tests of polymer materials are performed together with hardness measurements to determine their key mechanical properties at room temperature.

Heat treatment technologies for metal products

Description:
Research into heat treatment technologies for metal products using experimental and analytical methods. Research into heat treatment technologies for metal products using experimental and analytical methods. Research into heat treatment technologies for metal products using experimental and analytic

Study of material surface properties

Description:
Surface tension and wettability of materials are investigated by measuring the contact angle with various liquids at room temperature and by evaluating the surface free energy.

Metal fatigue and strength testing of dental implants and their orthopedic abutments

Description:
Metal fatigue and strength testing of dental implants and their orthopedic abutments. Metal fatigue and strength testing of dental implants and their orthopedic abutments. Metal fatigue and strength testing of dental implants and their orthopedic abutments. Metal fatigue and strength testing of dent

Air pollution research and technology

Description:
Research on air pollution in urban, indoor and working air; analysis of the release of pollutants from materials and processes; development and prototyping of technologies for cleaning up polluted air based on integrated process engineering, bio- and nano-technology solutions.

Determination of mechanical properties of steel strip specimens

Description:
We perform mechanical property testing of steel strips and metal specimens in accordance with the LST EN ISO 6892-1 standard. We determine yield strength, tensile strength, and percentage elongation, providing official test reports that confirm material quality and compliance with standards.

Improvement and development of mechanical production technologies

Description:
The parameters of mechanical production processes (efficiency, quality, etc.) are studied, and recommendations for their improvement are formulated. The parameters of mechanical production processes (efficiency, quality, etc.) are studied, and recommendations for their improvement are formulated.

Strength assessment, modelling and experimental testing of composite and metallic structures

Description:
Mechanical testing and numerical FEM modelling of composite and metallic materials and structures: static, fatigue and impact testing, residual stress measurement using the hole-drilling method, assessment of strength, damage and fracture, and experimental investigations in laboratory and industrial

Life cycle assessment

Description:
Environmental impact assessment of processes and services; application of life-cycle analysis methods to improve the efficiency and reduce the impact of technological processes; calculation of the carbon footprint of products and companies; definition and implementation of eco-labelling criteria.

Development of alternative binders

Description:
Natural and technogenic additives capable of replacing Portland cement clinker are studied by analyzing their structure and properties and applying them in low-CO₂, environmentally friendly cement technologies. The chemical and mineral composition and material properties are determined.

Development of new organic compounds using modern organic chemistry synthesis methods

Description:
Modern organic synthesis methods, such as microwave reactor synthesis, flow synthesis, and catalytic synthesis, can be applied to the development of organic compounds for scientific research or high-tech companies focused on creating pharmaceutical and functional materials.

Studies of electrochemical and photoelectric properties

Description:
Determination of ionisation potentials of organic semiconductors by photoelectron emission spectrometry; Determination of reduction and oxidation potentials by cyclic voltammetry; Measurements of charge mobility.

Synthesis of organic semiconductors

Description:
Synthesis and identification of organic emitters and charge transporting compounds. The main field of application is optoelectronic devices (organic light-emitting diodes, field-effect transistors, organic or hybrid solar cells).

Advanced technological solutions for water and wastewater treatment

Description:
Integration of advanced water treatment processes; development and performance analysis of combined water treatment systems including advanced oxidation, photocatalysis, sorption and biodegradation processes; prototyping and deployment of innovative technological solutions with 99.9% efficiency.

Development and evaluation of biotechnological products

Description:
Development of biotechnological products from plant and microorganism cells and renewable resources, and modelling and digitisation of new technological bioprocesses.

Evaluation of photophysical properties

Description:
Recording absorption, fluorescence, phosphorescence spectra of solids and solutions, measuring emission lifetimes, determining emission quantum yields by absorption and luminescent spectrometry methods.

Determination of solar cell characteristics

Description:
Determination of solar cell characteristics (efficiency, spectral response, etc.) using modern characterization methods. Priority: next-generation solar cell prototypes.

Reducing greenhouse gas emissions

Description:
Development of low-CaO cements from local raw materials and technogenic products that harden in a CO2 environment, research into their structure and properties, and application to the production of high-strength, durable concrete products.

Formation of thin films and nanostructures

Description:
Thin functional layers and nanostructures are formed using advanced physical methods that allow the creation of surfaces with specifically controlled optical, electrical, mechanical, or other properties.

Determination of the hardness of metal samples by the Rockwell method.

Description:
We determine the hardness of metal alloys using the Rockwell, Vickers and Brunel methods. We perform metallographic tests of metal alloys. We provide official measurement and test protocols confirming the quality of the alloys and compliance with standards.

Formation of thin films for hydrogen and ammonia energy applications

Description:
Thin functional layers are formed for green hydrogen and green ammonia energy technologies. The layers are synthesized using physical deposition methods that allow precise control of the coating properties required for catalytic and electrochemical applications.

Development of advanced compound fertilizers

Description:
The service involves the development (prototype) of advanced multi-component liquid, suspension and bulk fertilizers using traditional raw materials and waste from various industries.

Investigation of thin films and (nano, micro) structures

Description:
Imaging, optical property, and spectroscopic studies of thin films, material composites, and component surfaces are provided, ensuring accurate assessment of structure, thickness, homogeneity, and functional characteristics.

Electromagnetic field immunity testing EMC IEC 61000-4-3

Description:
Using a GTEM cell, it is possible to test the immunity of products to electromagnetic fields of various frequencies. The homogeneous field strength is up to 10 V/m. Measurements are carried out in the GTEM cell according to the IEC 61000-4-3 methodology. It is possible to analyze continuous exposure

Physics experiment laboratory

Description:
The physics experiment laboratory provides an opportunity to explore the phenomena of mechanics, electromagnetism, optics, and atomic physics in practice using reliable laboratory equipment adapted for teaching. Measurements, observations, and experiments allow students to verify the validity of the

Analysis of the chemical composition of materials

Description:
The service includes the analysis of various chemical industry materials - raw materials, products, and waste - to determine their qualitative and quantitative chemical composition and possible impurities.

Interactive physics demonstrations

Description:
Interactive physics demonstrations provide an engaging and clear presentation of fundamental physics phenomena, allowing you to see how the laws of physics work in real life, while the presentation helps you understand the essence of the phenomena, their interrelationships, and their applications.

Technical consultation on improving the reliability of rotor systems, diagnostics

Description:
Investigation of the dynamic behaviour of a rotor system for technical diagnostic purposes, including an assessment of the vibrational activity of its bearing assemblies. Application of diagnostic methods to evaluate the condition of the rotor system.

Detail strength testing

Description:
We perform mechanical strength and load resistance testing of various components and products. We determine maximum load, deformation, stiffness, and failure characteristics. Testings are performed in accordance with standards applicable to the specific product or material. Universal testing machine

Standby power measurement according to IEC 62301 standard

Description:
Our N4L equipment allows performing these measurements across various supply voltage ranges.

Structural research of structural and composite materials

Description:
We perform static mechanical testing of structural and composite materials. We determine strength, deformation, stiffness, and load limits. Testing can be performed in accordance with the ISO 527 series and other applicable standards. Universal testing machines with a 10 N–100 kN load range are us

Structure and chemical composition analysis via X-Ray methods

Description:
Material structure and surface analysis services are provided using X-ray Diffraction (XRD), X-ray Photoelectron Spectroscopy (XPS), and Energy Dispersive Spectroscopy (EDS). Capabilities include phase identification, chemical state determination, and elemental composition mapping.

Microscopy and surface analysis

Description:
The service offers multi-modal imaging solutions, including Scanning Electron Microscopy (SEM), Atomic Force Microscopy (AFM), and optical techniques. Capabilities include high-resolution morphological analysis, surface topography mapping, and fluorescence microscopy for material characterization.

Material Characterization using optical spectroscopy

Description:
Services include the determination of material chemical composition and optical constants. The laboratory utilizes Raman and FTIR spectroscopy, multi-spectral ellipsometry, and UV-VIS-NIR fiber-optic spectrometry for the analysis of thin films and functional materials.

Integrated Micro- and Nanofabrication

Description:
We offer specialized services for the fabrication of micro- and nanostructures using electron beam and holographic lithography. Capabilities include dry etching, thin film deposition, and structural replication via thermal and UV nanoimprint technologies, including roll-to-roll processing.

Chemical Formulation and Corrosion Resistance Testing

Description:
We offer capabilities for material homogenization, precision dispensing, and corrosion resistance testing. The service includes contactless degassing of viscous mixtures, solvent evaporation, and 2K system metering. Accelerated aging tests are performed in a salt spray chamber to assess coating dura

Electrical characterization of materials

Description:
We offer electrical characterization for materials and optical systems. The service encompasses low-current, resistivity, and impedance measurements, alongside laser beam profiling and power analysis. Controlled gas flow experiments and non-contact thermal testing are available for semiconductors an

Thin Film Deposition and Coating Technologies

Description:
Comprehensive thin film deposition services covering PVD, CVD, MBE, and solution-based techniques. The facility enables the fabrication of semiconductor, metallic, diamond-like, and organic coatings designed for advanced research and device prototyping.

Holography, lithography and laser ablation of micro-/nanostructures

Description:
The facility offers diverse patterning techniques, ranging from electron beam lithography to holographic recording and nanoimprinting. Available equipment supports the fabrication of high-resolution nanostructures, diffractive optics, and photonic devices using UV and laser-based methods.

High-frequency circuits and devices measurements with a vector network analyzer (VNA measurements)

Description:
Reflection, transmission, and attenuation measurements. Cable attenuation, filter, amplifier, and antenna measurements up to 14 GHz. Equipment: Keysight FieldFox.

Feasibility studies, development of new methods, prototypes, research, consultations on the application of ultrasound to food processing or quality control

Description:
Focused on food production, processing, quality control and technological innovation companies. The service includes preparation of feasibility studies for the application of ultrasound technologies, research and development of new methods and prototypes and consulting.

Measurement of radiated emissions into the air (EMC)

Description:
Electromagnetic radiation into the air is a common problem for new products. Standards set strict limits that must not be exceeded.

EMC and GSM harmonic measurement

Description:
EMC and GSM harmonic measurement

PCB soldering

Description:
PCB soldering

EMC. Electrostatic discharge (ESD) immunity testing according to EN 61000-4-2

Description:
Tests are carried out according to the IEC 61000-4-2 standard. The following discharge types are performed: direct, indirect, contact, and non-contact. Electrostatic charge can easily damage components, reduce reliability, accelerate aging, disrupt device operation, or simply destroy it.

EMC. Immunity testing against conducted disturbances according to EN 61000-4-6 (EMC, electromagnetic compatibility)

Description:
These EMC tests are carried out according to the EN 61000-4-6 standard. This test is most often required for devices connected to networks (power grid, LAN, etc.). Using a CDN, the disturbance signal is introduced into the device’s network port and the effect is observed. CDN: M2, T2, T4, T8, S1

EMC. Testing of electronic devices’ immunity to voltage dips, short interruptions, and variations according to IEC 61000-4-11

Description:
Electromagnetic compatibility testing of electronic devices connected to the power supply network according to IEC 61000-4-11.

EMC. Electromagnetic compatibility consulting and solutions

Description:
We provide consulting on electromagnetic compatibility issues. We help solve electromagnetic compatibility problems, analyze electronic systems and printed circuit boards, and propose solutions that help meet EMC standards.

EMC. Measurement of current fluctuations, variations, and flicker in electronic devices according to IEC 61000-3-3

Description:
The measurement of flicker limits is described in the EMC IEC 61000-3-3 standard. It is possible to measure single-phase devices up to 6 kW.

EMC. Measurement of a device’s power parameters

Description:
Measurements of power supplies, lamp controllers, LED power supplies, motor controllers, and other electronic devices powered by mains voltage.

Color change test (Data Colour).

Description:
Color change test (Data Colour). Color change test (Data Colour). Color change test (Data Colour). Color change test (Data Colour). Color change test (Data Colour). Color change test (Data Colour). Color change test (Data Colour).

EMC. Measurement of current harmonics (harmonic currents) according to IEC 61000-3-2 standard

Description:
For devices powered from the electrical grid, depending on their power, requirements are set for the limits of the harmonic currents they generate. This is relevant for power supplies, motor controllers, LED and other types of lighting controllers and power supplies, lamp ballasts, etc.

Mechanical surface characterization and hardness testing

Description:
We provide testing services for surface microhardness, roughness, and wettability. The analysis encompasses Martens hardness determination, scratch resistance evaluation, and surface energy measurements. Testing is performed using specialized equipment suitable for diverse coatings and bulk material

Electric field measurement

Description:
Electric field measurement with isotropic Narda.

Spectrum and frequency measurements

Description:
Frequency and spectrum measurements using a portable Keysight spectrum analyzer. We can perform the measurements not only in the laboratory but also at the location you require.

EMC. Electromagnetic compatibility measurement of conducted emissions propagating through conductors (EMC)

Description:
Conducted disturbances propagate through conductors and are most often measured as device emissions into the power grid. For measurement, a special voltage filter LISN (Line Impedance Stabilization Network) is used, which can filter out noise and measure it in a 50 Ohm impedance environment.

Film elasticity testing

Description:
We perform mechanical and elasticity testing of polymer films. We determine tensile strength, elongation, tensile modulus, and failure characteristics. Testing can be performed in accordance with ISO 527-3:2018 or ASTM D882 standarts.

EMC. Conducted disturbance immunity testing by the BCI method according to ISO 11452

Description:
By the BCI method, high-frequency current is introduced into the cables of the device under test using current clamps, and the device’s response is observed. This method is most commonly used in automotive technology. Measurements are performed according to the ISO 11452 methodology.

Vibration resistance tests

Description:
The vibration and shock testing stand is designed to perform vibration and shock tests. Vibration resistance tests are most commonly used in the automotive, military, and industrial fields, and sometimes in logistics.

Temperature testing in a thermal humidity chamber (climatic tests)

Description:
Various measurements and tests of electronic products, prototypes, and components can be performed under different temperature and humidity conditions.To ensure proper operation of hardware, it is necessary to evaluate whether it will function under various specified conditions.

EMC. Testing of an electronic device’s immunity to voltage harmonics and interharmonics according to IEC 61000-4-13

Description:
Immunity tests against harmonics and interharmonics, including signaling signals at the AC power supply input, in the low-frequency range are carried out according to IEC 61000-4-13.

Applied scientific research and design of electronic, monitoring and control sensor systems

Description:
Scientific and applied research and design works are carried out in the fields of control of technological processes, design of medical devices, interactive sensor systems, car flow and parking sensors, and electronic systems for automated soil probing and property testing.

Modelling and calculation of diffusion, mass and heat transfer, and radiation defect processes in solids

Description:
Modelling and calculation of diffusion, mass and heat transfer, and radiation defect processes for optimisation of energy, photovoltaic, hydrogen, and advanced materials technologies.

Research on waste and its management and treatment processes

Description:
We provide research on various wastes: composition, properties, polymer identification, valuable material recovery, waste generation forecasting, recovery potential, decontamination methods, and fire impact analysis.

Development, research and application of catalysts, adsorbents, liquid chemosorbents

Description:
Synthesis and analysis of transition metal oxide adsorbents, catalysts and selective chemosorbents that could be used to separate, concentrate or remove specific substances from technological streams.

Development and synthesis of N-replaced amino acids, azoles and azines on the basis of their derivatives

Description:
Synthesis of N-substituted amino acids, their derivatives, five- and six-membered heterocyclic nitrogen-containing compounds with antimicrobial, anticancer, antioxidant properties and carbonic anhydrase inhibitory effects are carried out and their biological properties evaluation.

Development and application of advanced functional inorganic materials with specific physical and chemical properties

Description:
The service involves the synthesis, analysis and application of advanced oxide and chalcogenide materials, their nanoderivatives or multicomponent composites in photovoltaic systems, water splitting or environmental pollution reduction.

Synthesis of inorganic materials and study of their properties

Description:
Modern hydrothermal, microwave and solid-phase sintering processes are used for synthesizing silicate and related materials, studying their structure and properties, and applying them in low-energy cements and sustainable technologies. Material composition and properties are determined.

Research on the physical properties of chemicals

Description:
The service includes the analysis of physical properties of various chemical industry materials - raw materials, products, and waste - relevant to their use in technological systems.

Use of silicate and related materials in adsorption and catalysis processes

Description:
Application of calcium silicate hydrates for the removal of heavy metals from industrial and domestic wastewater by combining their ions through chemical interaction, as well as in oxidation reactions of volatile organic compounds.

Research and development of ultrasonic measurement and imaging systems, feasibility studies

Description:
Research and Development of ultrasonic measurement or imaging systems for industry or science. Ultrasound electronics: excitation pulsers, amplifiers, laser diode pulse sequences drivers, low noise preamplifiers, signal processing and integrated measurement systems.

Environmental exposure tests. Random vibrations

Description:
We perform professional environmental testing of products: random vibration, sinusoidal vibration, and shock testing. We evaluate mechanical resistance and stress during transport and operation, providing detailed test reports.

Characterization of the thermal transitions

Description:
Determination of the melting, crystallisation and glass transition temperatures of materials and evaluation of changes in enthalpy of transformations by differential scanning calorimetry. Evaluation of the thermal stability of materials by thermogravimetric analysis.

Technological development, prototypes, research, feasibility studies and design of semiconductor light source drivers

Description:
Service includes research, design and prototyping of semiconductor light source controllers (LED, LD, EE-LD, VCSEL, µLED, etc.). Solutions are focused on the sectors of large-sized LED video screens, photonics, automation, targeted optoelectronics and advanced electronics.

Feasibility studies, development of new methods, prototypes, research, consultations for quality inspection of ultrasonic transducers/arrays using electrical and/or acoustic parameters

Description:
Service includes development of methods, prototypes and technologies for the quality assessment of the ultrasonic transducers and arrays using measurements of electrical and/or acoustic parameters. Feasibility studies, Research and Development offered.