Description:
This service is designed to increase manufacturing efficiency using AI and camera technologies. We provide comprehensive expertise for the development and implementation of visual quality control solutions.

Description:
During the evaluation, the surface characteristics of precast concrete products (including unreinforced, reinforced, and prestressed products) and monolithic concrete structures installed on the construction site (including unreinforced and reinforced structures) are assessed based on their structur

Description:
null

Description:
Tribological analysis of elements and materials, development of methods for reliability improvement Tribological analysis of elements and materials, development of methods for reliability improvement Tribological analysis of elements and materials, development of methods for reliability improvement

Description:
Viscosity tests of cement mortar or concrete mixtures, performed using BTRHEOM laboratory equipment, allow for an accurate assessment of the mixture’s rheological properties: viscosity, thixotropy, flowability, and structural stability. These measurements help optimize the mixture’s composition.

Description:
It allows for the assessment of wood strength, moisture content, density, defects, and resistance to environmental factors. Laboratory tests help determine the reliability, durability, and suitability of structures for use in various areas of construction.

Description:
Environmental maintenance works include maintaining cleanliness and managing infrastructure. Various maintenance tasks are carried out, including minor environmental repair works. The safe and orderly use of laboratory areas is ensured.

Description:
Testing is carried out to determine the adhesion strength of coatings and their resistance to mechanical impact. During testing, the bond between layers and the substrate, potential defects, and compliance with technical requirements are evaluated, ensuring the quality and durability of the coatings

Description:
These are precise laboratory tests designed to determine the strength, elasticity, and load-bearing capacity of materials. The tests evaluate the properties of coatings, the tensile strength of steel, and compliance with technical standards to ensure the reliability and durability of structures.

Description:
The washing test is carried out according to the standard test method EN ISO 6330:2021, in a domestic washing machine. The shrinkage of textiles after washing is measured in the longitudinal and transverse directions after each washing and drying cycle. It is possible to test after multiple washing-

Description:
Development, research and evaluation of multifunctional polymer materials and products. Development, research and evaluation of multifunctional polymer materials and products. Development, research and evaluation of multifunctional polymer materials and products. Development, research and evaluatio

Description:
An energy consumption determination model is being developed, allowing for the assessment of vehicle technical parameters, number of passengers, changes in road condition and geometry, and characteristics of traffic flow. Algorithms for determining power requirements and energy consumption are being

Description:
Applications of reliability theory include the assessment of system and equipment reliability, failure analysis, and forecasting. Technological failures and operator errors are assessed to help improve safety and optimize operational processes.

Description:
Geometric measurements are performed for individual parts and assemblies of various materials, shapes, and complexity, providing detailed tolerances and accuracy reports. Using advanced scanning technologies, a digital 3D model of the component is created.

Description:
We design mechanical systems, taking into account technical, functional and production requirements. We prepare 3D models, technical drawings, perform structural calculations and select optimal engineering solutions.

Description:
Studies focused on the efficiency of construction work allow for an assessment of the quality of work organization, technological solutions, resource utilization, and cost management. This analysis helps optimize processes, reduce risks, increase productivity, and ensure the smooth implementation.

Description:
We provide electron beam lithography services for photo template production, micro and nano structure formation on conductive surfaces. We can create detailed structures from 100nm, adapted for laser, ultrasound and other advanced technologies.

Description:
Depending on the level of analysis, a system of evaluation indicators is developed along with a tailored assessment methodology. The ecosystem is then evaluated, growth scenarios and strategies are created, and specific actionable measures are proposed to foster development.

Description:
Creation and preparation of ShopMill milling programs for milling on the DMU 35 machine. Creation and preparation of ShopMill milling programs for milling on the DMU 35 machine. Creation and preparation of ShopMill milling programs for milling on the DMU 35 machine.

Description:
We design and develop digital and analog electronic circuits and printed circuit boards according to customer specifications. We develop systems with embedded computers, multilayer PCBs (up to 7 layers, 100 µm), and manufacture and assemble prototypes.

Description:
When defects appear in structures, it is necessary to conduct an expert structural assessment to determine the causes of the defects and their impact on the structure’s continued service life. Structural defects are usually of a technical nature (concrete, reinforcement, formwork).

Description:
Critical point drying is performed using a QUORUM K850WM system operating at pressures up to 90 bar with liquid CO₂. The method ensures drying of structurally sensitive samples without surface tension-induced deformations. The chamber diameter is 150 mm.

Description:
includes methods that allow for the assessment of the condition of concrete, masonry, and other structures without damaging them. Measurements of strength, density, reinforcement placement, defects, and surface quality are performed to ensure the safety and reliability of the structures.

Description:
Rezultate bus sukurtas gaminio (valdiklio) prototipas, atliktas jo išbandymas kaupiant, saugant ir perduodant nuotoliniu būdu duomenis, sukauptus iš energetinių resursų apskaitos prietaisų. Rezultate bus sukurtas gaminio (valdiklio) prototipas, atliktas jo išbandymas kaupiant, saugant ir per

Description:
These are advanced solutions that include optimizing concrete mix designs, conducting laboratory tests, and using innovative additives. Tests are conducted on strength, durability, resistance to environmental factors, and structural properties.

Description:
We perform rotor dynamics analysis, condition diagnostics, and develop fault prevention measures. We identify rotor imbalance, misalignment, and bearing or gear defects. We help prevent catastrophic failures and extend equipment service life.

Description:
Determining the amount and orientation of steel reinforcing fibers in fresh and hardened concrete makes it possible to assess the distribution and orientation of the fibers and the actual effectiveness of the reinforcement. The tests are conducted using modern measurement methods.

Description:
We perform thermal defect detection of buildings and engineering systems using non-contact thermal imaging analysis. Heat loss zones, structural defects and overheating areas are identified. Thermal imaging camera TP8 (SM:06207) is used.

Description:
It allows for the evaluation of the physical, mechanical, and performance properties of materials, as well as the quality of surface coatings. The adhesion of paints, resistance to environmental factors, coating thickness, and durability are analyzed to ensure the reliability and adequate protection

Description:
Dimensional control of discrete elements of printing forms. Determination of hardness of polymer printing forms. Determination of hydrophilicity/hydrophobicity of printing forms.

Description:
We perform non-destructive on-site condition assessment of reinforced concrete structures. Electro- magnetic(chemical) methods are used to assess the location of reinforcement,the thickness of the protective layer, signs of corrosion/local defects,justifying decisions regarding repair/strengthening.

Description:
Construction mortars are very commonly used in flooring projects. For example, leveling compounds provide an ideally smooth base for laying various floor coverings on top of them.

Description:
Prototyping and fabrication of products, components and experimental solutions in D-Lab laboratories. Available capabilities include robotic CNC machining, polymer and clay 3D printing, experimental material processing and prototype testing.

Description:
Developing models of the environmental and economic impacts of transport systems and comparing different scenarios makes it possible to answer questions about how road, air, rail, and water transport infrastructure affects air pollution, energy consumption, and climate change as travel and usage pat

Description:
This is a comprehensive process during which environmental factors—such as temperature, humidity, air quality, noise, vibrations, and lighting—are measured and analyzed. These studies help assess the impact of the environment on human health, equipment performance.

Description:
Durability testing of samples is performed to determine material resistance to environmental impact, loads, and aging processes. The evaluation focuses on physical, chemical, and mechanical changes, helping to assess product service life and suitability for long-term use.

Description:
Research into industrial waste, by-products and secondary raw materials to identify practical uses. We develop and test prototypes of new materials, semi-finished materials or products from the client’s waste streams.

Description:
This includes an analysis of the quality of the concrete mix, placement, compaction, surface treatment, and installation of the finish. The assessment determines whether the construction processes comply with design and standard requirements, ensuring the durability and performance characteristics.

Description:
Synthesis and identification of organic semiconductors that transport or generate positive or negative charges. Main application area is optoelectronic devices (organic or hybrid solar cells, organic light emitting diodes, field effect transistors).

Description:
We perform modeling and analysis of mechanical objects, studying the strength and movement of products, devices or equipment. We use 2D and 3D models, analytical and numerical methods to optimize structures and ensure their reliability and efficiency.

Description:
Aerodynamic analysis of aircraft and unmanned aerial vehicles (UAVs) using panel methods and computational fluid dynamics (CFD). UAV structural prototyping, evaluation of design solutions, flight testing, and analysis of flight test results.

Description:
Surface roughness measurement service designed to assess the quality of machined surfaces and the stability of technological processes. Measurements are performed by contact profiling using the GARANT ST1 profilometer, determining the main microgeometric parameters and surface topography features.

Description:
We conduct research on the mechanical properties of materials and structural elements, assessing strength, stiffness and durability. We apply tensile, compression and bending tests, cyclic loading and fatigue analysis. We use NS PAS hydraulic station and KAL force transducers.

Description:
We perform building energy performance assessments and research focused on low-energy and nearly zero-energy buildings. We apply multi-objective solution methods for envelope optimization, ensuring Class A requirements and sustainable, energy-efficient solutions for business and science.

Description:
To fully elucidate the structure of organic compounds, techniques such as nuclear magnetic resonance (NMR) spectroscopy, high-resolution mass spectrometry (HRMS), and mass spectrometry (MS) are applied.

Description:
Microstructure/defects of metal parts, workpieces are examined by metallographic microscopy using an Olympus BX41M with a digital camera. Internal/surface defects are identified, homogeneity of structure, phase distribution, influence of technological processes on material properties are assessed.

Description:
Aerodynamic testing in a low-speed wind tunnel at airflow velocities of 4–60 m/s. Services include force and pressure measurements, flow visualization, model adaptation for testing, and recommendations for improving aerodynamic performance.

Description:
Experimental design and pilot studies on enhanced oil recovery, including evaluation of surfactants, polymers, low salinity and WAG injection methods for reservoir optimization.

Description:
Micro- and nanostructure fabrication using self-assembly methods for large-area photonic structures and functional surfaces in optical, sensing, and catalytic applications.

Description:
We perform mechanical property and strength testing of glass-fiber-reinforced composites. We evaluate tensile strength, deformation, stiffness, and failure characteristics. Testing can be performed in accordance with ISO 527-4:2023 or ASTM D3039/D3039M standards.

Description:
We perform tensile testing of various polymer materials. We determine tensile strength, elongation at break, tensile modulus, yield strength, and other mechanical parameters. Testing can be performed in accordance with ISO 527-1:2019, ISO 527-2, or ASTM D638 standarts. Test loads range from 10 N to

Description:
Interactive laboratory work in materials physics, allowing practical exploration of the properties of materials and the effects of physical phenomena using educational laboratory equipment.

Description:
Modeling support for energy and subsurface projects, providing digital analysis of processes, flows, and system behavior to support robust, data-driven project decisions.

Description:
A feasibility study is being conducted in the specific field of textile material research, application, or the development of materials with new functional properties, alongside an analysis of the company's capacity to manufacture a new product or material.

Description:
Expert consulting and training on surface processes, thin films, nanostructures, and catalysis, supporting the development and application of advanced materials technologies in industry and business.

Description:
Thermal treatment and heating of materials and raw materials are performed in the temperature range from 50 °C to 1100 °C in an air atmosphere using the high-precision laboratory electric furnace SNOL 7.2/1100 L. The service is intended for scientific research, material property evaluation, proces

Description:
We perform advanced material composition, structure, surface, and optical property characterization using state-of-the-art imaging and spectroscopy methods for research, technology development, and industry.

Description:
Holograms are widely used in scientific research, medicine, commerce and industry. This technique allows you to create complex holograms from 2D images, which, when interacting with laser light, carry certain information. These holograms can be used from document security to micro-opto-electromechan

Description:
We design mechanical systems, taking into account technical, functional and production requirements. We prepare 3D models, technical drawings, perform structural calculations and select optimal engineering solutions.

Description:
Modelling and calculation of 2D and 3D surface structure and roughness formation processes for optimisation of micro- and nanotechnology, semiconductor, and functional surface applications.

Description:
Design, synthesis and testing of materials based on natural, synthetic or modified polymers for fibre engineering, pharmaceutical industry, production of cosmetics and hygiene products, packaging materials, bioplastics and biocomposites as well as in water treatment.

Description:
Scientific research on the use of biofuels and hydrogen in internal combustion engines focuses on optimizing combustion processes, improving engine efficiency, and reducing exhaust emissions. Experimental and numerical modelling methods are used to investigate the effects of different biofuel compos

Description:
We provide technical expertise and assessment of technological lines and other technological systems, evaluating their functionality, reliability, durability, operating speed, performance, and other technical and operational criteria.

Description:
Probabilistic modeling of meteorological extremes, climate change impacts, and rare events is performed using advanced statistical analysis, extreme value theory, and data integration methods.

Description:
Plasmochemical technologies are used to form amorphous carbon and diamond-like carbon coatings and create nanostructures. This service allows you to obtain surfaces with specifically controlled tribological, optical, barrier, or protective properties, suitable for high-value-added products and proto

Description:
Measurement of rheological and photorheological characteristics of polymeric materials using the oscillatory shear and tensile tests. Studies of viscosity, dynamic mechanical thermal analysis, phase transitions and curing processes of polymeric materials.

Description:
Fabrication of micro- and nanostructures and thin-film architectures in a cleanroom environment using advanced lithography, etching, and thin-film deposition techniques, complemented by optical property modeling.

Description:
Synthesis and investigation of advanced nanomaterials and nanostructures for photonic and energy solutions, enabling the development of functional materials for light and energy management technologies.

Description:
Design of products, services and product-service systems: from analysing needs and existing solutions to concept development, user experience and more sustainable business model solutions. The KTU-developed CircuLoop methodology may be applied.

Description:
A training program has been prepared to introduce robot models using the Robix Rascal construction kits. During the program, you will be introduced to the construction and programming capabilities of the Robix Rascal, and during practical sessions you will have the opportunity to apply the acquired

Description:
Application of artificial intelligence in business and the public sector: training, consulting, practical application. Use of AI in the employee training process (creation of educational games, interactive videos, tests, etc.) and in the optimization of other solutions in human resource management,

Description:
Design improvement of an intraosseous dental implant assembly with an internal conical connection. Design improvement of an intraosseous dental implant assembly with an internal conical connection. Design improvement of an intraosseous dental implant assembly with an internal conical connection.

Description:
Testing the properties of various textile materials (woven, knitted, non-woven and others): determination of resistance to abrasion and pilling and pilling (Martindale test), determination of strength properties, testing of air and water vapor permeability.

Description:
Creation or renewal of a brand, visual identity and customer experience. The service covers positioning, value proposition, visual identity and the design of key customer touchpoints with the brand.

Description:
Determining the service life of the carrier basket. Determining the service life of the carrier basket. Determining the service life of the carrier basket. Determining the service life of the carrier basket. Determining the service life of the carrier basket. Determining the service life of the carr

Description:
Aerobic degradation of polymer materials is studied in a model liquid medium by determining degradation kinetics and biodegradability based on biochemical oxygen demand

Description:
Tensile and compression tests of polymer materials are performed together with hardness measurements to determine their key mechanical properties at room temperature.

Description:
Risk and uncertainty analysis helps assess system security, model sensitivity, and data uncertainty. This service allows you to identify risk scenarios, reduce their likelihood, and make effective, data-driven decisions.

Description:
The service is designed to calculate key people and people management metrics and to use them in business decision-making. It examines the logic behind the selection, calculation, and application of these metrics. Decisions are supported and justified by data and quantitative evidence.

Description:
Implementation of technological quality improvement methods. Implementation of technological quality improvement methods. Implementation of technological quality improvement methods. Implementation of technological quality improvement methods.

Description:
Research into heat treatment technologies for metal products using experimental and analytical methods. Research into heat treatment technologies for metal products using experimental and analytical methods. Research into heat treatment technologies for metal products using experimental and analytic

Description:
Surface tension and wettability of materials are investigated by measuring the contact angle with various liquids at room temperature and by evaluating the surface free energy.

Description:
Metal fatigue and strength testing of dental implants and their orthopedic abutments. Metal fatigue and strength testing of dental implants and their orthopedic abutments. Metal fatigue and strength testing of dental implants and their orthopedic abutments. Metal fatigue and strength testing of dent

Description:
Research on air pollution in urban, indoor and working air; analysis of the release of pollutants from materials and processes; development and prototyping of technologies for cleaning up polluted air based on integrated process engineering, bio- and nano-technology solutions.

Description:
We perform mechanical property testing of steel strips and metal specimens in accordance with the LST EN ISO 6892-1 standard. We determine yield strength, tensile strength, and percentage elongation, providing official test reports that confirm material quality and compliance with standards.

Description:
The parameters of mechanical production processes (efficiency, quality, etc.) are studied, and recommendations for their improvement are formulated. The parameters of mechanical production processes (efficiency, quality, etc.) are studied, and recommendations for their improvement are formulated.

Description:
Mechanical testing and numerical FEM modelling of composite and metallic materials and structures: static, fatigue and impact testing, residual stress measurement using the hole-drilling method, assessment of strength, damage and fracture, and experimental investigations in laboratory and industrial

Description:
We perform surface structure studies of micro and nano structures using AFM / SPM microscopes. Mechanical probe scanning provides nanometric surface information. The largest scan area is 110 × 110µm, vertical resolution is 0.34 nm, horizontal resolution is 1.4 nm.

Description:
Environmental impact assessment of processes and services; application of life-cycle analysis methods to improve the efficiency and reduce the impact of technological processes; calculation of the carbon footprint of products and companies; definition and implementation of eco-labelling criteria.

Description:
Natural and technogenic additives capable of replacing Portland cement clinker are studied by analyzing their structure and properties and applying them in low-CO₂, environmentally friendly cement technologies. The chemical and mineral composition and material properties are determined.

Description:
An analysis of the existing market, its potential, competitive situation and consumer behavior (experience) is performed; the opportunities of new markets, consumer needs, competitive environment, business development risks (economic, market, financial, legal) are assessed and recommendations for th

Description:
Non-destructive optical/optoacoustic control research, system development are being carried out. Automatic image recognition algorithms are being developed, laser, ultrasound technologies are being applied,real-time metrological systems are being implemented for monitoring production line processes.

Description:
Modern organic synthesis methods, such as microwave reactor synthesis, flow synthesis, and catalytic synthesis, can be applied to the development of organic compounds for scientific research or high-tech companies focused on creating pharmaceutical and functional materials.

Description:
Research on MEMS and MOEMS applications. Research on MEMS and MOEMS applications. Research on MEMS and MOEMS applications. Research on MEMS and MOEMS applications. Research on MEMS and MOEMS applications. Research on MEMS and MOEMS applications.

Description:
After calculating error ratios and evaluating the capabilities and metrological characteristics of the company’s available reference standards and auxiliary equipment, the optimal calibration characteristics of the reference instruments are determined; comprehensive calibration method is selected.

Description:
Determination of ionisation potentials of organic semiconductors by photoelectron emission spectrometry; Determination of reduction and oxidation potentials by cyclic voltammetry; Measurements of charge mobility.

Description:
Synthesis and identification of organic emitters and charge transporting compounds. The main field of application is optoelectronic devices (organic light-emitting diodes, field-effect transistors, organic or hybrid solar cells).

Description:
Integration of advanced water treatment processes; development and performance analysis of combined water treatment systems including advanced oxidation, photocatalysis, sorption and biodegradation processes; prototyping and deployment of innovative technological solutions with 99.9% efficiency.

Description:
Development of biotechnological products from plant and microorganism cells and renewable resources, and modelling and digitisation of new technological bioprocesses.

Description:
Recording absorption, fluorescence, phosphorescence spectra of solids and solutions, measuring emission lifetimes, determining emission quantum yields by absorption and luminescent spectrometry methods.

Description:
Determination of solar cell characteristics (efficiency, spectral response, etc.) using modern characterization methods. Priority: next-generation solar cell prototypes.

Description:
Development of low-CaO cements from local raw materials and technogenic products that harden in a CO2 environment, research into their structure and properties, and application to the production of high-strength, durable concrete products.

Description:
The level of TPL achievement is determined based on complex criteria, and an innovation development roadmap is created up to commercialization (TRL 9) The level of TPL achievement is determined based on complex criteria, and an innovation development roadmap is created up to commercialization (TRL 9

Description:
Thin functional layers and nanostructures are formed using advanced physical methods that allow the creation of surfaces with specifically controlled optical, electrical, mechanical, or other properties.

Description:
We determine the hardness of metal alloys using the Rockwell, Vickers and Brunel methods. We perform metallographic tests of metal alloys. We provide official measurement and test protocols confirming the quality of the alloys and compliance with standards.

Description:
Seeks to develop an innovative tax optimization solution based on tax environment analysis, risk assessment, and scenario modelling. Research is conducted, a methodology is created, and a prototype is tested to help companies plan taxes more efficiently, reduce costs, and improve financial sustainab

Description:
Thin functional layers are formed for green hydrogen and green ammonia energy technologies. The layers are synthesized using physical deposition methods that allow precise control of the coating properties required for catalytic and electrochemical applications.

Description:
Consulting and recommendations on preparing for the transition to a paperless organization. The service covers the key considerations for selecting document management and business process digitalization solutions, as well as approaches to ensuring effective change management and employee adoption t

Description:
The service involves the development (prototype) of advanced multi-component liquid, suspension and bulk fertilizers using traditional raw materials and waste from various industries.

Description:
Imaging, optical property, and spectroscopic studies of thin films, material composites, and component surfaces are provided, ensuring accurate assessment of structure, thickness, homogeneity, and functional characteristics.

Description:
Using a GTEM cell, it is possible to test the immunity of products to electromagnetic fields of various frequencies. The homogeneous field strength is up to 10 V/m. Measurements are carried out in the GTEM cell according to the IEC 61000-4-3 methodology. It is possible to analyze continuous exposure

Description:
The physics experiment laboratory provides an opportunity to explore the phenomena of mechanics, electromagnetism, optics, and atomic physics in practice using reliable laboratory equipment adapted for teaching. Measurements, observations, and experiments allow students to verify the validity of the

Description:
Developing a new products or manufacturing technologies is a time-consuming process. However, by applying additive manufacturing principles and technologies, this time can be shortened, and the product can be delivered to market much faster.

Description:
The service includes the analysis of various chemical industry materials - raw materials, products, and waste - to determine their qualitative and quantitative chemical composition and possible impurities.

Description:
Interactive physics demonstrations provide an engaging and clear presentation of fundamental physics phenomena, allowing you to see how the laws of physics work in real life, while the presentation helps you understand the essence of the phenomena, their interrelationships, and their applications.

Description:
AI, data analytics, and data science services, including task automation, predictive modeling, natural language processing, computer vision, recommendation systems, big data analysis, optimization, risk and fraud detection, and the creation of customized solutions, are provided.

Description:
Smart information integration tools are being developed and applied for the synthesis of data from different sources, the aggregation of expert knowledge, and the automated modeling of information flows.

Description:
Analysis of the uncertainty and sensitivity of modeling results helps to assess the accuracy of models, identify parameters that influence results, and define the limits of forecast reliability for more accurate risk assessment and better decision-making.

Description:
Failure and longevity data are analyzed, and system reliability, uncertainty, and sensitivity of results are evaluated. This helps identify risk factors, predict failures more accurately, and optimize maintenance and operational decisions.

Description:
This allows for the evaluation of the strength, stiffness, deformation properties, and load-bearing capacity of materials and components. Tensile, compression, bending, shear, and other tests are conducted to determine the reliability and durability of structures.

Description:
Investigation of the dynamic behaviour of a rotor system for technical diagnostic purposes, including an assessment of the vibrational activity of its bearing assemblies. Application of diagnostic methods to evaluate the condition of the rotor system.

Description:
We perform mechanical strength and load resistance testing of various components and products. We determine maximum load, deformation, stiffness, and failure characteristics. Testings are performed in accordance with standards applicable to the specific product or material. Universal testing machine

Description:
Our N4L equipment allows performing these measurements across various supply voltage ranges.

Description:
We perform static mechanical testing of structural and composite materials. We determine strength, deformation, stiffness, and load limits. Testing can be performed in accordance with the ISO 527 series and other applicable standards. Universal testing machines with a 10 N–100 kN load range are us

Description:
Material structure and surface analysis services are provided using X-ray Diffraction (XRD), X-ray Photoelectron Spectroscopy (XPS), and Energy Dispersive Spectroscopy (EDS). Capabilities include phase identification, chemical state determination, and elemental composition mapping.

Description:
The service offers multi-modal imaging solutions, including Scanning Electron Microscopy (SEM), Atomic Force Microscopy (AFM), and optical techniques. Capabilities include high-resolution morphological analysis, surface topography mapping, and fluorescence microscopy for material characterization.

Description:
Services include the determination of material chemical composition and optical constants. The laboratory utilizes Raman and FTIR spectroscopy, multi-spectral ellipsometry, and UV-VIS-NIR fiber-optic spectrometry for the analysis of thin films and functional materials.

Description:
We offer specialized services for the fabrication of micro- and nanostructures using electron beam and holographic lithography. Capabilities include dry etching, thin film deposition, and structural replication via thermal and UV nanoimprint technologies, including roll-to-roll processing.

Description:
Hardware and software solutions of different measurement systems are proposed. If the measured object is in the legal metrology field, the calibration and verification techniques are developed and validated, as well as hardware and software for automated calibration and verification.

Description:
Design and research of applications of high-speed, distributed electronic systems for measurement, diagnostics, communications, control and other technical problems using programmable logic (FPGA) and embedded microcontrollers.

Description:
Justification of the project need, including reviews of recent scientific research, a detailed analysis of the situation, and determination and justification of the level of research and experimental development (R

Description:
Research on the impact of human resource management practices, organizational climate, and manager behavior on employees' sociopsychological experiences and work outcomes. Quantitative, qualitative, and experimental research methods are applied to identify key problems and offer practical solutions

Description:
We offer capabilities for material homogenization, precision dispensing, and corrosion resistance testing. The service includes contactless degassing of viscous mixtures, solvent evaporation, and 2K system metering. Accelerated aging tests are performed in a salt spray chamber to assess coating dura

Description:
Assessing existing business processes, identifying opportunities, barriers and benefits of the circular business models Assessing existing business processes, identifying opportunities, barriers and benefits of the circular business models Assessing existing business processes, identifying opportuni

Description:
Completeness, quality, relevance and comparability of ESG indicators. The assessment of the current situation leads to recommendations for improving ESG indicators and reporting.

Description:
Following tasks can be performed: preparation of samples for microstructural analysis; microstructural examination with an optical microscope or SEM, determining the main phases, defects (non-metallic inclusions, cracks); fracture examination; hardness HRC, HV measurement, scratch test for coatings,

Description:
Development and testing of energy consumption efficiency models. Experimental evaluation of energy saving innovations. Development and testing of energy consumption efficiency models. Experimental evaluation of energy saving innovations.

Description:
Development of forecasting models for solar, wind, and bioenergy generation. Economic evaluation of new energy storage technologies. Development of forecasting models for solar, wind, and bioenergy generation. Economic evaluation of new energy storage technologies. Development of forecasting models

Description:
Bloomberg Decision Lab is an innovative R

Description:
Advanced artificial intelligence solutions are being developed for corporate financial management, enabling real-time analysis of a company’s financial condition, including payables, outstanding invoices, debt dynamics, and other key indicators. By leveraging historical data and established financ

Description:
We offer electrical characterization for materials and optical systems. The service encompasses low-current, resistivity, and impedance measurements, alongside laser beam profiling and power analysis. Controlled gas flow experiments and non-contact thermal testing are available for semiconductors an

Description:
Comprehensive thin film deposition services covering PVD, CVD, MBE, and solution-based techniques. The facility enables the fabrication of semiconductor, metallic, diamond-like, and organic coatings designed for advanced research and device prototyping.

Description:
The facility offers diverse patterning techniques, ranging from electron beam lithography to holographic recording and nanoimprinting. Available equipment supports the fabrication of high-resolution nanostructures, diffractive optics, and photonic devices using UV and laser-based methods.

Description:
Research into continuous concrete placement technologies for massive monolithic structures involves the analysis of concrete mix properties, heat release, the hardening process and technological parameters. The suitability of the mix for long-term pouring, interlayer adhesion.

Description:
Research on the company's innovation culture and dynamic capabilities aims to assess how these factors influence decision-making processes, fostering adaptability, competitiveness, and long-term strategic success in a rapidly changing market. AI supported models are used.

Description:
Reflection, transmission, and attenuation measurements. Cable attenuation, filter, amplifier, and antenna measurements up to 14 GHz. Equipment: Keysight FieldFox.

Description:
Thermal, thermo-chemical, thermo-mechanical processing technologies of metals and alloys are analyzed and improved, and casting and welding technologies are consulted. A technical feasibility study is prepared for the application of thermal treatment or casting technological processes in the company

Description:
Using an original methodology, a family business governance diagnostic is conducted, a decision-making model is developed, and a systemic matrix of potential conflicts is constructed. The research is based on the integration of systemic family relationship analysis, dynamic capabilities, and decisio

Description:
Focused on food production, processing, quality control and technological innovation companies. The service includes preparation of feasibility studies for the application of ultrasound technologies, research and development of new methods and prototypes and consulting.

Description:
Systematic analysis of the production process and evaluation of performance indicators to determine the situation of the process or unit. If required, a methodology for assessing manufacturing productivity is developed or adopted.

Description:
Measurement and testing of mechanical system vibrations and environmental acoustic noise parameters, as well as evaluation of the technical condition of mechanical systems based on vibration and acoustic noise characteristics.

Description:
This is an advanced, non-destructive testing method that allows for the precise detection of internal defects in materials: flaws, cracks, fissures, pores, or delamination. High-frequency ultrasound is used to assess the quality, reliability, and safety of structures.

Description:
Electromagnetic radiation into the air is a common problem for new products. Standards set strict limits that must not be exceeded.

Description:
Development of business digitalization roadmaps using big data and machine learning models. Agentification and AI solutions for business process optimization and decision-making

Description:
We perform temperature testing of products and materials in a climate chamber, evaluating their resistance to heat, cold, and temperature fluctuations.

Description:
Based on LLMs and big data, niche export opportunities are evaluated using real-time global trade data, the level of product complexity in target markets is assessed, and export development scenarios are created

Description:
EMC and GSM harmonic measurement

Description:
Measuring autogenous and drying shrinkage and deformation allows for an accurate assessment of concrete behavior during hardening by monitoring changes in volume and the development of stresses. Tests conducted under different curing conditions help determine the stability of the mixture.

Description:
PCB soldering

Description:
Tests on flexural structures make it possible to evaluate the resistance of structural members to bending loads, determine their strength, stiffness, and deformation characteristics, and assess the crack propagation process. Laboratory tests help to accurately assess the behavior of structures under

Description:
Tests are carried out according to the IEC 61000-4-2 standard. The following discharge types are performed: direct, indirect, contact, and non-contact. Electrostatic charge can easily damage components, reduce reliability, accelerate aging, disrupt device operation, or simply destroy it.

Description:
These EMC tests are carried out according to the EN 61000-4-6 standard. This test is most often required for devices connected to networks (power grid, LAN, etc.). Using a CDN, the disturbance signal is introduced into the device’s network port and the effect is observed. CDN: M2, T2, T4, T8, S1

Description:
Electromagnetic compatibility testing of electronic devices connected to the power supply network according to IEC 61000-4-11.

Description:
We provide consulting on electromagnetic compatibility issues. We help solve electromagnetic compatibility problems, analyze electronic systems and printed circuit boards, and propose solutions that help meet EMC standards.

Description:
Tests on masonry products are conducted to assess the quality of bricks, blocks, and other masonry elements, as well as their compliance with standard requirements. During these tests, the products’ compressive strength, density, water absorption, dimensional accuracy, frost resistance.

Description:
The measurement of flicker limits is described in the EMC IEC 61000-3-3 standard. It is possible to measure single-phase devices up to 6 kW.

Description:
The development of next‑generation concrete mixes involves selecting advanced binders, mineral additives and chemical modifiers to optimize hydration processes, rheological behavior and microstructure formation. Such compositions reduce clinker content while improving concrete density, pore struct

Description:
Measurements of power supplies, lamp controllers, LED power supplies, motor controllers, and other electronic devices powered by mains voltage.

Description:
Development, investigation, and application of advanced modeling, optimization, and control methods and algorithms, based on process data analysis, fundamental mathematical models, and AI techniques, for complex manufacturing processes and systems.

Description:
All measuring instruments and systems, as well as technological equipment in a company or laboratory, are tested at the beginning of their operation. During use, in order to ensure their functionality, the stability of technical parameters and characteristics, and reliability, they are maintained.

Description:
Provide services and experimental analysis for subsurface flow, CCS, hydrogen, and geothermal systems, including high-pressure and high-temperature testing to support data-driven technology and design decisions. Controlled laboratory experiments are performed, including high-pressure and high-temper

Description:
Color change test (Data Colour). Color change test (Data Colour). Color change test (Data Colour). Color change test (Data Colour). Color change test (Data Colour). Color change test (Data Colour). Color change test (Data Colour).

Description:
For devices powered from the electrical grid, depending on their power, requirements are set for the limits of the harmonic currents they generate. This is relevant for power supplies, motor controllers, LED and other types of lighting controllers and power supplies, lamp ballasts, etc.

Description:
This includes the design of unique formulations tailored to specific operating conditions: high strength, resistance to chemicals, heat, cold, or abrasion. Comprehensive laboratory testing is conducted to evaluate rheology, strength, durability, and structural reliability.

Description:
We provide testing services for surface microhardness, roughness, and wettability. The analysis encompasses Martens hardness determination, scratch resistance evaluation, and surface energy measurements. Testing is performed using specialized equipment suitable for diverse coatings and bulk material

Description:
Electronic moisture measurement allows for the precise determination of moisture content in various building materials and surfaces: concrete, plaster, masonry, wood, and insulation systems. Modern sensors are used to assess the condition of materials and the drying process.

Description:
Consulting and applied research services in the fields of energy, carbon sequestration, hydrogen, geothermal storage, and underground flow modeling, including studies, analyses, and knowledge dissemination.

Description:
These are active mineral components, such as silica fume, fly ash, and other reactive additives, that improve the strength, density, and durability of concrete. They reduce porosity and increase resistance to freezing, chemical exposure, and deformation, ensuring high quality.

Description:
This measurement allows for quick and accurate determination of moisture levels in concrete, plaster, masonry, wood, and other building materials. Electronic measuring devices help assess the drying process, identify areas of high moisture, and ensure appropriate conditions for further construction.

Description:
Electric field measurement with isotropic Narda.

Description:
Frequency and spectrum measurements using a portable Keysight spectrum analyzer. We can perform the measurements not only in the laboratory but also at the location you require.

Description:
Conducted disturbances propagate through conductors and are most often measured as device emissions into the power grid. For measurement, a special voltage filter LISN (Line Impedance Stabilization Network) is used, which can filter out noise and measure it in a 50 Ohm impedance environment.

Description:
Aggregate testing includes determining particle size distribution, moisture content, density, fineness modulus, friability, and organic impurities. The data obtained allows for an assessment of the suitability of aggregates for the production of concrete, mortar, and other mixtures.

Description:
Tests on building materials and structures are conducted to assess their quality, durability, and compliance with technical requirements. The tests examine mechanical properties, structure, and resistance to environmental factors, and identify any potential defects or damage.

Description:
We perform mechanical and elasticity testing of polymer films. We determine tensile strength, elongation, tensile modulus, and failure characteristics. Testing can be performed in accordance with ISO 527-3:2018 or ASTM D882 standarts.

Description:
By the BCI method, high-frequency current is introduced into the cables of the device under test using current clamps, and the device’s response is observed. This method is most commonly used in automotive technology. Measurements are performed according to the ISO 11452 methodology.

Description:
The vibration and shock testing stand is designed to perform vibration and shock tests. Vibration resistance tests are most commonly used in the automotive, military, and industrial fields, and sometimes in logistics.

Description:
It allows for the evaluation of the rheology, strength, durability, and sustainability of mixtures. The research helps optimize the composition, reduce the carbon footprint, and develop more efficient, environmentally friendly cement products.

Description:
This involves the application of advanced technologies, the optimization of mixtures, and the search for sustainable solutions. The research conducted enables the development of environmentally friendly products with high performance characteristics and their effective integration into construction.

Description:
Various measurements and tests of electronic products, prototypes, and components can be performed under different temperature and humidity conditions.To ensure proper operation of hardware, it is necessary to evaluate whether it will function under various specified conditions.

Description:
Immunity tests against harmonics and interharmonics, including signaling signals at the AC power supply input, in the low-frequency range are carried out according to IEC 61000-4-13.

Description:
Laser microstructuring of materials using ultrashort pulse lasers with IR, visible, and UV radiation for high-precision microstructures, minimal thermal effects, and superior surface quality.

Description:
An assessment of the impact of digitalization in the construction sector on building design review processes involves an analysis of digital technologies, BIM models, data management, and process automation. The assessment examines how digital solutions increase accuracy and reduce the risk of error

Description:
This methodology allows for indirect evaluation of mechanical, geometric and optical parameters of periodic microstructures, for which traditional measurement methods are not suitable. This methodology can be applied to optimization and control of technological processes. The result is the dependenc

Description:
Scientific and applied research and design works are carried out in the fields of control of technological processes, design of medical devices, interactive sensor systems, car flow and parking sensors, and electronic systems for automated soil probing and property testing.

Description:
The service provides analysis and testing of hybrid power systems with energy storage. Capabilities for balancing services, frequency containment and restoration, synthetic inertia, grid flexibility, and emergency operation are assessed using RTDS, PSCAD, and PSS®E.

Description:
include the evaluation of fresh mixture consistency, workability, setting behavior, strength development, and durability indicators. Laboratory analyses help determine material quality, performance under various conditions, and suitability for construction or manufacturing applications.

Description:
It involves an analysis of historical, architectural, structural, and environmental aspects. The condition, authenticity, valuable characteristics, and preservation potential of the site are assessed in order to ensure well-founded decisions regarding its management, protection and use.

Description:
A non-invasive partial discharge (PD) diagnostics service for power grid equipment based on ultrasonic (acoustic emission) and electromagnetic (UHF/HF) measurement techniques.

Description:
This involves determining the physical, mechanical, and geotechnical properties of soil in order to assess its composition, strength, density, moisture content, compressibility, and bearing capacity. These tests are essential for the design of foundations, utility networks, and other structures.

Description:
includes the evaluation of physical, mechanical, structural, and durability properties. Tests determine strength, moisture content, density, defects, biological resistance, and performance under various environmental conditions, supporting quality control and material optimization.

Description:
We offer specialized research and development services focused on the development, control, and validation of next-generation hybrid actuators, drives, and robotic systems.

Description:
This test is performed to determine the strength, modulus of elasticity, elongation, and yield strength of steel reinforcing bars. The test allows for an assessment of the quality of the reinforcing bars, their compliance with standards, and their suitability for use in reinforced concrete structure

Description:
The result would include hydraulic and electrical diagrams, components, calculation protocols and other components of the project (pages 40-50). The project would be coordinated with the necessary institutions.

Description:
These are non-destructive and destructive testing methods that allow for the assessment of the strength, density, layer structure, and condition of concrete or other materials based on drilled cylindrical samples. This testing is essential for the accurate diagnosis of structures, quality control.

Description:
Modeling of enhanced oil recovery and subsurface energy systems to evaluate production and energy storage solutions, optimize project designs, and reduce technological risks.

Description:
Modelling and calculation of diffusion, mass and heat transfer, and radiation defect processes for optimisation of energy, photovoltaic, hydrogen, and advanced materials technologies.

Description:
Computer modeling and numerical analysis of cutting processes (turning, milling, drilling, etc.). Computer modeling and numerical analysis of cutting processes (turning, milling, drilling, etc.). Computer modeling and numerical analysis of cutting processes (turning, milling, drilling, etc.). Comput

Description:
Companies receive consultancy and practical support to assess and implement the substitution of hazardous chemicals with safer alternatives that meet business, technical, and regulatory requirements (e.g. REACH, CLP). The support also includes improving chemical management practices, reducing regula

Description:
This includes laboratory tests to evaluate the strength, density, and structure of concrete and reinforcing steel, as well as their compliance with design and standard requirements. These tests are conducted to ensure the safety, reliability, and quality control of structures.

Description:
Developing a customised and actionable strategy that meets business objectives and international sustainability standards. Also, the preparation of a professional, standards-compliant sustainability report and the setting of science-based targets (SBTi). Advising on corporate sustainability reportin

Description:
Conducting comprehensive and screening Life Cycle Assessment (LCA) studies in accordance with ISO14040/44. Use of LCA environmental impact results and knowledge of problem areas to develop sustainable business models and products (eco-design). Preparation of the Environmental Product Declaration (EP

Description:
It enables the accurate and rapid production of prototypes, engineering models, and technical components from a variety of thermoplastic materials. MakerBot technology ensures high print quality, dimensional accuracy, and reliability, making it suitable for both research and practical engineering.

Description:
Includes an assessment of the effects of admixtures on the properties of concrete mixtures: workability, setting time, strength development, water absorption, and durability. The tests help determine whether the admixtures are compatible with one another and suitable for use in specific concrete.

Description:
We provide research on various wastes: composition, properties, polymer identification, valuable material recovery, waste generation forecasting, recovery potential, decontamination methods, and fire impact analysis.

Description:
Synthesis and analysis of transition metal oxide adsorbents, catalysts and selective chemosorbents that could be used to separate, concentrate or remove specific substances from technological streams.

Description:
Synthesis of N-substituted amino acids, their derivatives, five- and six-membered heterocyclic nitrogen-containing compounds with antimicrobial, anticancer, antioxidant properties and carbonic anhydrase inhibitory effects are carried out and their biological properties evaluation.

Description:
This involves evaluating the physical, thermal, and mechanical properties of the mixture. Density, strength, thermal conductivity, water absorption, and structural integrity are determined in order to assess the material’s suitability for energy-efficient structures.

Description:
includes an assessment of the properties of the concrete mix, the movement patterns of the formwork, the hardening processes, and the quality of the structure’s formation. These tests help determine the technology’s effectiveness, safety, and compliance with design requirements.

Description:
The service involves the synthesis, analysis and application of advanced oxide and chalcogenide materials, their nanoderivatives or multicomponent composites in photovoltaic systems, water splitting or environmental pollution reduction.

Description:
Modern hydrothermal, microwave and solid-phase sintering processes are used for synthesizing silicate and related materials, studying their structure and properties, and applying them in low-energy cements and sustainable technologies. Material composition and properties are determined.

Description:
The service includes the analysis of physical properties of various chemical industry materials - raw materials, products, and waste - relevant to their use in technological systems.

Description:
Application of calcium silicate hydrates for the removal of heavy metals from industrial and domestic wastewater by combining their ions through chemical interaction, as well as in oxidation reactions of volatile organic compounds.

Description:
Includes the evaluation of the properties of fresh and hardened mortar: workability, setting time, density, strength, water absorption, and adhesion. The tests are conducted to determine the quality of the mortar, its suitability for use, and its compliance with standard requirements.

Description:
Research and Development of ultrasonic measurement or imaging systems for industry or science. Ultrasound electronics: excitation pulsers, amplifiers, laser diode pulse sequences drivers, low noise preamplifiers, signal processing and integrated measurement systems.

Description:
includes an assessment of concrete’s resistance to wear, abrasion, impact loads, and surface damage. The tests are conducted to determine the concrete’s durability, suitability for heavy loads, and compliance with standard requirements.

Description:
We perform professional environmental testing of products: random vibration, sinusoidal vibration, and shock testing. We evaluate mechanical resistance and stress during transport and operation, providing detailed test reports.

Description:
The testing of various marketing solutions, including advertising visuals, communication messages, new products, prototypes, or their elements, is conducted. These studies aim to evaluate the impact of these solutions on the behavior, emotional engagement, and decision-making of target groups, ident

Description:
Activities include data and policy analysis, stakeholder consultation, assessment of the current situation and identification of the potential for a circular economy.

Description:
An analysis and strategic evaluation of the company's stakeholder network is conducted, and networking scenarios are developed depending on innovation and internationalization goals

Description:
Prepared using the “Knowledge House” method, which employs three levels and 14 modules. The first level gathers information sources, identifies primary, new, regional, and segment-based competitors, and determines market niches. The second level analyzes competitors’ characteristics, products,

Description:
Determination of the melting, crystallisation and glass transition temperatures of materials and evaluation of changes in enthalpy of transformations by differential scanning calorimetry. Evaluation of the thermal stability of materials by thermogravimetric analysis.

Description:
Comprehensive production process analysis, identification of potential automation areas and proposal of the most suitable solutions. Implementation and integration of various robotics and automation technologies into the existing production environment, ensuring their smooth operation.

Description:
An analysis of workload and time use is performed, work quality and results are assessed; employee surveys are conducted about working conditions, motivation and engagement; the technologies used, employee knowledge, skills and learning opportunities are assessed; recommendations are made for increa

Description:
Service includes research, design and prototyping of semiconductor light source controllers (LED, LD, EE-LD, VCSEL, µLED, etc.). Solutions are focused on the sectors of large-sized LED video screens, photonics, automation, targeted optoelectronics and advanced electronics.

Description:
Specialized data collection and/or processing algorithms and methods are being developed to detect anomalies and defects, assess the condition of measuring equipment, renewable sources, and storage devices used in power systems and low-voltage distribution networks.

Description:
Service includes development of methods, prototypes and technologies for the quality assessment of the ultrasonic transducers and arrays using measurements of electrical and/or acoustic parameters. Feasibility studies, Research and Development offered.

Description:
Calibration, type evaluation, and approval are carried out for measuring instruments used for both electrical quantities (voltage, current, resistance, frequency, power, etc.) and non-electrical quantities (mass, temperature, density, length, etc.) in accordance with national legislation.

Description:
Studies, development and implementation of IoT solutions for measurement, monitoring, and diagnostics applications in smart agriculture, electricity distribution, and metering systems using embedded systems and federated machine learning.