Description:

Tripple quadrupole masss spectrometer can detect compounds present at very low concentrations, therefore it is very suitable for the quantitative analysis, especially of trace compounds. Also it is possible, to obtain molecular fragments of compounds and perform quantitative analysis by fragmentation pattern. This method of analysis is important for determining composition of the product and also for quality control.

Ultra performance liquid chromatography (UPLC) allows separation of the mixtures of compounds of high to medium polarity. UPLC can separate compounds and record MS spectra in the range of 20-4000 m/z. Sensitivity of the instrument depends on the properties of individual compounds, bus in general it is in the pg  mass range.

Using supercritical fluid chromatography it is possible to analyse also non polar compounds, such as lipids, lipid soluble vitamins and pigments.

Description:

Nuclear Magnetic Resonance spectrometer for identification of organic compounds in solutions. The device can analyze pure compounds and multi-component mixtures. The spectrometer can record the magnetic resonance spectra of the 1H, 13C, 15N, 19F, 31P nuclei, and various two-dimensional spectra. The principle of operation is based on different electron shielding of the nuclei. The device has a permanent magnetic field of 9.4 Tesla, a room-uniform shim system for optimum magnetic field uniformity required for 1D, 2D and 3D experiments without sample cell rotation; at least 20 orthogonal gradient controls and 60-position automatic sample changer.

Description:
Universal surface analysis system for X-Ray photoelectron spectroscopy, ion scatering spectroscopy, reflection electron energy loss spectroscopy, and angle Resolved XPS (ARXPS)

Description:

Hybrid mass spectrometer with time of flight mass analyser is able to record molecular masses with high accuracy, from which molecular formulas can be calculated. This is the most powerful method for the identification of individual compounds present in complex mixtures at low concentrations. 

Measure of molecular masses is very important in materials development and quality control. 

Ultra performance liquid chromatography (UPLC) allows separation of the mixtures of compounds of high to medium polarity. UPLC can separate compounds and record UV spectra in the range of 200-500 nm, and MS spectra in the range of 20-8000 m/z with the accuracy of less than 1 ppm. 

Description:

The Bruker micrOTOF-QIII spectrometer can be used to accurately determine the molecular weights of organic compounds and to check the purity of compounds. The device features an automated LC-MS system for generating chemical formulas, molecular formula validation, and general LC-MS measurements. The Bruker micrOTOF-QIII Spectrometer can be used to validate formulas, identification of the compound with LC, GC or direct probe, extended identification. The mass found on the spectrometer is for a very wide range of 20 to 40,000 m / z, a mass of 1 to 2 ppm RMS, a mass resolution of 20,000 (FWHM) at LC.

Description:

Pegasus 4D GCxGC-TOFMS system used for determination and identification of volatile aroma compounds in the liquid sample and in the headspace of sample matrix (vapour phase). Qualitative and quantitative chromatographic analysis of chemical composition of the essential oils, volatile extracts, spicy and medicinal herb, and etc.

Complex sample analysis, separation and identification of individual volatile aroma compounds. 

Sample inlet CIS4 system with refrigeration (split/splitless), which could be combined with static headspace gas station,  thermodesorbtion (TDA) and  solid phase microextraction (SPME) stations.     

Gas chromatograph working temperature interval +4 to 450 °C, carrier gas preassure in the range of 0-150 psi (split/splitless injector), Time of flight mas spectrometer (TOF MS) with electron ionization source (EI), mass ranges 5-1000 amu, mass resolution FWHM is higher than 1000, TOF MS is combined with two dimentional gas chromatograph in 1D and 2D mode; TOF MS enables automatic optimization of MS parameters and automatic mass calibrations.

Description:

KRATOS molecular beam epitaxy system for GaAs with control.

Description:

Liquid chromatograph mass spectrometer LCMS-2020 can detect molecular masses with high accuracy, from which can be checked the purity of compounds, ascertain whether the required compound is obtained. This is a powerful method since identification takes place at low concentrations. With its array of ultrafast capabilities, LCMS-2020 mass spectrometer provides the ultimate in high-speed analysis with unrivaled sensitivity. It offers faster, more accurate detection of trace impurities present in pharmaceuticals samples, environmental pollutants, or other samples. LCMS-2020 can detect masses in range m/z 10 to 2000 and achieve an ultra-fast polarity switching time of just 15 ms.

Description:
Electron beam lithography, electron microscope, energy dispersive spectroscopy

Description:
Scanning electron microscope

Description:
X-ray diffractometer D8 Discover, Bruker

Description:

Nuclear Magnetic Resonance spectrometer for investigation and identification of organic compounds in solutions. This includes the solution of biological macromolecules (eg proteins, DNA and oligosaccharides) and the identification of low molecular weight compounds. Pure compounds as well as multi-component mixtures can be analyzed. The spectrometer can record the magnetic resonance spectra of the 1H, 13C, 15N, 19F, 31P nuclei, and various two-dimensional spectra. The Avance III 700 MHz is a three-channel NMR device with a magnetic field of 16.4 Tesla with a 54 mm room temperature channel, a built-in cryogenic triple-resonance head, as well as a 60-position automatic sample changer.

Description:

Ray photoelectron spectroscopy and Auger electron spectroscopy system KRATOS XSAM800

Description:
Electrophoresis unit OmniPAGE

Description:
High performance liquid chromatograph

Description:
Centrifugal Vacuum Concentrator/Freeze Dryer

Description:
Electrophoresis technique SDS-PAGE.

Description:
Water activity measurement, CR400 CR-400, Konica Minolta

Description:
Vacuum sublimation equipment

Description:
Accelerated solvent extraction

Description:
Bottle filler

Description:
Equipment of Dairy Components Concentration

Description:

Supercritical extractor

Description:
Supercritical extractor

Description:
Gas analyser OPTIMA7 BIOGAS

Description:
Distiller Buchi Glass Oven B-585

Description:
Potentiostat mAUTOLAB

Description:
Schleibinger Geräte GmbH VICASONIC ultrasound apparatus

Description:
Set of equipment for sublimation

Description:
Melting point apparatus

Description:
Luminescence spectrometer Perkin Elmer LS-55

Description:
Dielectrical spectrometer Agilent E4980A Precision LCR meter

Description:
Drug dissolution test

Description:
Optical tensiometer (contact angle meter)

Description:
Yeast fermentation bioreactor designed to carry. The equipment consists of: bioreactor, dosing pump, 4 Bio control unit. Culture medium maintained at a temperature, pH, and air.

Description:
System for charge mobility measurements

Description:
Shrinkage temperature determination instrument

Description:
Biodegradability measuring complex

Description:
Spectrophotometer GENESYS 8

Description:
Automated Soxhlet extraction

Description:
Polarizing microscope (Olympus BX41) with light source and hotstage

Description:
Termoconstanter for aw measurement

Description:
Leather processing equipment containing 1) apparatus for leather tanning process imitation and 2) shaker for solutions preparation

Description:
FTIR spectrometer Perkin Elmer Frontier

Description:
Constant climate chamber Memmert GmbH HCP-246

Description:
Disperser IKA T 50 digital ULTRA-TURRAX

Description:
Kugelrohr distillation system

Description:
Glass oven Kugelrohr with accessories

Description:
Melting point apparatus

Description:
Micro Viscoamylograph Brabender

Description:
Spin Coater SPS SPIN-150

Description:
Spectrophotometer Konica Minolta CM-5

Description:
Melt flow rate meter Thermo C-Flow

Description:
Microbial Oxidative Degradation Analyzer Saida FDS Inc. MODA-6

Description:
Turbo molecular vacuum system (end vacuum ~10 -7 mbar)

Description:
Balances for big weights, model: MSE 12201S-0CE

Description:
Photochemical reactor, Ace Glass

Description:
X-ray single crystal diffraction spectrometer

Description:
Analytical balances (0,001 mg) and balances table

Description:
water purification system

Description:
Interferometer, MarSurf WS 1

Description:
spincoater, Chemat Technology Spin-Coater KW-4A

Description:
Microwave reactor with hydrogenation module, Discover LabMate, CEM

Description:
Pressure filtration vessel

Description:
Laboratory autoclave

Description:
Nanosecond laser flash photolysis measurement system

Description:
Microwave reactor with hydrogenation module, Discover LabMate, CEM

Description:
Centrifugal pumps in series and parallel test bench BP-1S/EV

Description:
Filter press and micro filter pilot plant FP-1S/EV

Description:
sieve analysisi instrumen Sonic Sifter

Description:
equipment of powder homogenizing WAB TURBULA T2F

Description:
Fixed bed adsorption unit FBAU/EV

Description:
tray dryer apparatus TD/EV

Description:
Microscope Olympus SZX7 for crystals

Description:
Spectrophotometer T70, PG Instruments limited

Description:
liquid mixing apparatus LM/EV

Description:
Transmitter RTD-200 is converting the signals from the measuring cell.

Description:
Spray dryer MSD/EV

Description:
Thin film evaporation pilot plant ESSA/EV

Description:
Continuous distillation pilot plant DCA/EV

Description:
Linseis TMA PT1000 Thermomechanical Analyzer

Description:
Gas chromatograph with TCD detector

Description:
Double-effect falling-film evaporation pilot plant EDEA/EV

Description:
Climatic chamber

Description:
bending testing machine

Description:
Autolab PGSTAT12 Potentiostat/Galvanostat 

Description:
UV/VIS spectrophotometer Lambda 25

Description:
Spectrometer AANALYST400

Description:

PDR-1000AN samples passively (i.e., without a pump) the air surrounding the monitor; air accesses freely the sensing chamber of the instrument by means of convection, diffusion, and adventitious air motion. Measures concentrations of dust, smoke, mists and fumes in real-time.

Description:
Gas chromatograph-mass spectometer CLARUS 500

Description:
Programmable rapid distillation system with external titratinion, Gerhardt

Description:
Flame Photometer, PFP7, operating and Service Manual

Description:
Compact Lab Fluid Bed Dryer/Granulator/Coater

Description:
Resistance Meter

Description:
Mass spectometer CLARUS 500

Description:
spactrophotometr GENESYS 5

Description:
Cooling incubator

Description:
Thermostat MIR-253

Description:
Laminar flow closet

Description:
Automatic digital refractometer ATAGO RX 5000C

Description:
Polarimeter ADP 220

Description:
Binocular microscope

Description:
High performance liquid chromatograph vith mass spectrometer

Description:
muffle oven

Description:
Autoclave Laboclav

Description:
Equipment for the determination of volatile compounds (gas chromatograph) with clean air generator, GC solution software

Description:
Thermostat with cooling

Description:
Amplification equipment

Description:
Zwick Roell Materials Testing Machine

Description:
martindale testing machine

Description:
Spectrophotometer SF450X W/UV

Description:
Spectrophotometer XRite Color Digital

Description:
Microscope DPM 300

Description:
Stand of granular solid fuel burining test

Description:
FAG BRAI³ Braille Dot Checker

Description:
Paste Ink Proofer

Description:
Hardness tester

Description:
Insulation agains heat apparatus IG/ISOC (f. GIULIANI), Nr. 13917

Description:
Multifunctional device Test 445

Description:
Impact tester (PEGASIL/ZIPOR), Nr. 50.130

Description:
Water vapour permeability test equipment STM 473 (SATRA), Nr. 473-5-0512:

Description:
Bally penetrometer STM 703 (f. SATRA), Nr. 703-1-0512

Description:
Elecrical resistance testing instrument (PEGASIL/ZIPOR), No. 50.130

Description:
Electrodynamic Vibration Excitter systems

Description:
Materials Testing Machine

Description:
EMG

Description:
Treadmill

Description:
Mask aligner MA-750

Description:
3D Motion capture system

Description:
Rowing trainer

Description:
Cardio trainer, bicycle

Description:
Scale KERN PLE 310-3N

Description:
The fiber-optic spectrometer AvaSpec-2048

Description:
Optical microscope NIKON (analyzer)

Description:
microwave plasma enhanced chemical vapor deposition system

Description:
Device for galvanoplastic multiplication

Description:
Fourier transform infrared spectrometer

Description:
Atomic force microscope NT-206

Description:
Energy dispersive X-Ray analysis

Description:
Optical and fluorescence microscope

Description:
Lloyd`s mirror holographic lithography setup.

Description:
solar spectra simulator

Description:
vacuum evaporation unit

Description:
vacuum evaporation unit

Description:
RF reactive ion etching system

Description:
ion etching system

Description:
diamond like carbon ion beam synthesis system

Description:
Fluxmeter F01

Description:
Network analyzer

Description:
Temperature test chamber HD-BT-40B

Description:
RVG, sensor, program KDIS

Description:
Luminance meter LS-110

Description:
Vector network analyzer

Description:
vibrating disc mill Pulverisette 9

Description:
TAM AIR III calorimeter.

Description:
CILAS 1090 LD laser scattering particle size distribution analyzer

Description:
Spin coater for the formation of thin layers

Description:
Works with KT1000130M HPLC

Description:
Sepacore Basic Flash System, Buchi Labortechnik

Description:
Meat and fish texture modeling equipment

Description:
Voice telephony signaling protocols converter

Description:
The stand consists of a frequency converter and powder braking device of the engine load switching. The load can be changed manually or set an automatic dependency. Load torque can be proportional to the square of the speed (fan characteristics) may be avirkščiai proportional to the speed.

Description:
High performance liquid chromatograph

Description:
UV laser

Description:
Dot-matrix hologram origination system

Description:
Osciloscope

Description:
Analytical balances

Description:
CE440 Elemental Analyser

Description:
Benchtop chemical crystallography system XtraLab mini (Rigaku)

Description:
Physiological parameters monitoring system

Description:
Equipment of Dairy Mechanical Processing

Description:
Potentiostat/Galvanostat BioLogic SP-150 for fundamental electrochemistry, sensors, corrosion, energy sources coatings investigations

Description:
UV/VIS spectrophotometer Lambda 25

Description:
Device for multiplication of optical security marks MSM-1

Description:
Absorption pilot plant ADSA/EV

Description:
Media Gateway

Description:
UV/VIS spectrophotometer Lambda 35

Description:
Tensiometer equipped with Vilhelmy plate and DoNuoring systems

Description:
Electrodynamic Vibration Excitter systems

Description:
Atomic Absorption Spectrometer Perkin Elmer Model 403

Description:
Abrasion Resistance Tester IG/ABR/DIN (f. GIULIANI), Nr. 13916

Description:
Zeta Potential and Submicron Particle Size Analyzer Beckman Coulter DelsaNano C

Description:
Centrifuge Hettich Universal 320 R

Description:

The Kjeldahl method is recognized as the most accurate in determining the total nitrogen content of solid and liquid samples. Based on the mineralization of the test organic compound in concentrated sulfuric acid at the boiling point of this acid. The test substance is oxidized to carbon dioxide and water, and the nitrogen in it is released as ammonia, which forms an ammonium salt in the presence of sulfuric acid.

Description:
Stand for Metal and semiconductor electrical conductivity testing.

Description:
Stand of liquid and solid fuel ash analysis. Analysis is performed acording EU standard

Description:
Sound pressure level meter Investigator 2260. The basic system.

Description:
impedance analyzer

Description:
The shock device

Description:
Generator output block

Description:
Generator output block

Description:
Meter for low flow measurement using laminar flow elements. Meter is used with the differential pressure transducer, valve block and universal indicator.

Description:
RF signal generator

Description:
Stand for metal and semiconductor electrical conductivity testing.

Description:
Stand for access to Phase reverse gear controlled rectifier - DC motor (VL - V) diagram and its work. Tested the iron work with an active load, then to the engine when the engine offense and load. The actuator is tested it with the engine and regenerative braking mode, when there is a separate and total iron work groups.

Description:
DSP evaluation kit

Description:
Radio frequency power meter

Description:
Electric power quality analyser M12192

Description:
Stand enables experimentally get short cage rotor induction motor mechanical and energy characteristics in different operating modes. Tests carried out by combining the stator windings star and triangle. Mechanically loaded engine braking device equipped with frequency converter. Parameters measured with a digital measuring device.

Description:
KCHB,P2-83 VSWR measurement

Description:
PC processor designed to work with Linux. 266MKz Pentium CPU, 64MB of RAM, video.

Description:
Overvoltages simulator

Description:
Stand for access to the frequency converter operating principle, design and management capabilities. Determine the size of the added voltage stator resistance compensation, motor voltage versus frequency, no-load speed and gliding. Obtained drive mechanical characteristics at different frequencies.

Description:
Physiological parameters monitoring system

Description:
Electromagnetic field intensity meter

Description:
Chuck a size of 65 x 90 x 10 mm, max. Load of 50g. 2 WAR motors with encoder designed robotic arm or manipulator. Its purpose is to perform gripping - lifting - laying functions.

Description:
Media Gateway

Description:
Tester for 50b/s to 2.048Mb/s digital circuits (E1 G.703, G.704).

Description:
Ultrasound scanner together with set of transducers for the noninvasive imaging of human internal tissues

Description:
K2D image processing board for video signal from the Autonomy robot conversion to a digital signal. The module for video making and autonomous robot navigation.

Description:
Manual soldering eqiment for assembly and repair

Description:
The system is designed to simulate and investigate the regulation of lighting, blinds, heating system regulation. Equipment allows to carry out meteorological data tracking.

Description:
Laboratory electrical motors stand

Description:
Osciloscope

Description:
SDH Add/Drop Multiplexer

Description:
Training stand for engine rotation speed control system for examination using a Siemens SIMATIC S300 programmable logic controller. The study bench adjustable speed drives with frequency converter and asynchronous motor. Tested air speed devices.

Description:
Technological process modeling. Pneumatic valve control using the AS-i and PROFIBUS communication via Siemens SIMATIC S300 programmable logic controller.

Description:
Programmable logic controller processor module 024 QUANTUM UNITY / 7168K. Widget for processes, signal processing equipment and programming management. The processor supports Modbus RS232 / RS485, Modbus Plus, Ethernet TCP / IP and USB.

Description:
Stand for actuators investigation and coordination parameters. The actuator used Brushless AC motor and frequency converter. The control system consists of hierarchical management approach. Actuator adjustment is carried out using the software package WMEMOC. Explored the controller parameters on pereinamiesims processes

Description:
The study bench adjustable speed drives with frequency converter Altivar 61 and asynchronous motor applies to air traffic control. Tested air speed devices. The air stream is adjusted by changing the engine speed or the air passage deflector. Examine when the control method is more economical.

Description:
Mixed Signal Oscilloscope DLM2054 4ch, 500MHz

Description:
Spectrum analyser

Description:
Stand for access to the industrial drive Siemens Micromaster 420. Examined the drive structure, functional diagram, starting and stopping methods settings and change. An optimal motor feeding voltage versus frequency. Tested slip compensation.

Description:
Five degrees of freedom manipulator controlled low-power servo motor 20x30 mm with jaw. Designed for students training

Description:
Training bench is a positioning system with three-phase asynchronous motor and valve motor. Engines powered by the company SEW frequency inverters. Each engine has a position sensor (encoder). Control Algoritam based upon the hierarchical management. One drive is master, the other slave to get the synchronous movement.

Description:
MCU FW development system

Description:
Satellite of 5 m. diameter with equipment for signals reception and amplifying

Description:
Mixed Domain Oscilloscope

Description:
Arbitrary waveform generator Rigol DG5251

Description:
Arbitrary waveform generator Rigol DG5251

Description:
Transcoder

Description:
Video recorder

Description:
Cable and antena analyser

Description:
Syringe infusion pump docking station "Infusion station IDS", 2 pcs. "Aiteks 2016 Universal" infusion pump

Description:
300 MHz Digital Oscilloscope

Description:
DSP evaluation kit

Description:
SDH Add/Drop Multiplexer

Description:
DSP evaluation kit

Description:
SDH Add/Drop Multiplexer

Description:
A spectrum analyzer (150 kHz - 3 GHz ) measures the magnitude of an input signal versus frequency within the full frequency range of the instrument. The primary use is to measure the power of the spectrum of known and unknown signals.

Description:
DSP evaluation kit

Description:
Thermogravimetric Analyzer Linseis STA PT1600 coupled with mass spectrometer GSD320 Linseis/Pheiffer Vacuum

Description:
Equipment for composition and emulsions formation

Description:
Pressure losses pilot plant DPA/EV

Description:
cooling stand TE6/EV and TE6A/EV

Description:
Beer making (brewing) unit

Description:
Mettler Toledo T70 potentiometer.

Description:
Twin screw extruder KrausMaffei Berstorf GmbH ZE25Rx40D-UTXmi

Description:
Thermomechanical analyzator and dielectric spectrometer

Description:
DRON-6 powder X-ray diffractometer

Description:
Thermogravimeter

Description:
HPLC system with UV/VIS and DAD

Description:
Meat and fish thermal processing and cooling equipment

Description:
Gelchromatografas Malvern Viscotek 270 Dual Detector

Description:

Air handling unit with direct-driven supply air and extract air fans.

Description:
Electroacustic spectrometer DT-300

Description:
Microwave reactor Anton Paar GmbH - Monowave 300

Description:
Hardness tester

Description:
Stand of solid fuel properties testing. Test are performed acording EU standard

Description:
Stand of thermo physical characteristics of liquid fuel

Description:
Stand of volatility charakteristics analysis

Description:
Stand of solid fuel combustion research

Description:
Stand of solid biofuel combustion research

Description:
Combusion procuts components analyzer "MultilyzerNG``

Description:
Rub fastness tester also called VESLIC IG/10/MOD (f. GIULIANI), Nr. 14279

Description:
Stand of research for solid and liquid elemental composition

Description:
GENERAL PURPOSE STRAIN VIEWER (Ref. S-18)

Description:
IRB 120 is the smallest multipurpose industrial robot developed by ABB and weighs only 25kg. This six degrees of freedom robot can handle payloads up to 3 kg and 580mm reach space. This mokomoasis stand with two ABB IRB 120 robot is designed for students to learn to manage ABB's industrial robots. Embodied robotics, automation and control, mechatronics, mechanical knowledge.ABB robot control program is compiled using the RAPID programming language. The robotic design, its technical features allow to solve various manipulation. objects in space problems.

Description:

Apparatus is useful standard tool to determine the strain modula, and the bedding modula of soils and flexible pavements by repetitive loading.

Description:
Luminescence spectrometer FLS980 (Edinburgh instruments)

Description:

Three stage cascade impactor "Dekati® PM10"  for determining gravimetric mass size distribution of particles. The operating principle of the Dekati® PM10 impactor is based on inertial size classification and gravimetric or chemical analysis of the collected, size classified particle samples.

Description:
Mask aligner and nanoimprint lithography

Description:
picoammeter / bias source

Description:
Hydrothermal processing of materials under high pressure system

Description:
The measuring and diagnosis module FSA 720 is the automotive diagnostics platform. The modular system structure permits connection to existing and new diagnostics systems for education purpose.

Description:
Differential scanning calorimeter Perkin Elmer DSC8500

Description:
Texture analyser TA.XT plus (Stable Micro System, UK) with load cell, platform and basic software

Description:
Fermenters

Description:
Mixed Signal Oscilloscope DLM2054 4ch, 500MHz BW, used to observe signals in electronic circuits.

Description:
Additional devices for RF experimental and modelling applications

Description:
Climatic chamber

Description:
Standard BOSCH sensor set

Description:
Cintra 202 - UV-Visible Spectrometer

Description:
The CR-400 handheld chroma meter (color measuring instrument )

Description:
Preparative chromatography system Sepacore Line C-600

Description:
Gas chromatograph with FID detector CLARUS 500

Description:
Raman scattering spectrometer Renishaw in Via Spectrometer with accessories

Description:
Universal Texture Analyser Instron 3343

Description:
Cyclic voltammetry apparatus (potentiostat), Bio-logic Sas SP-150

Description:
Laboratory centrifuge for tubes LMC-3000

Description:
Heat transfer pilot plant with tube-in-tube, shell-and-tube and plate exchangers SCTA/EV

Description:
FT-IR spectrometer with RAMAN module

Description:
Heating Circulators, Julabo HE-4

Description:
Spectrofluorimeter for measuring steady state luminescence spectra and quantum yields in the UV – NIR spectral range with single photon counting sensitivity. Spectrometer for measuring fluorescence lifetimes spanning the range from picoseconds to microseconds based on the technique of time correlated single photon counting, Edinburgh Instruments FL920

Description:
Differential scanning calorimeter DSC214Polyma

Description:
Liquid-liquid extraction pilot plant LLA/EV

Description:
FT-IR spektrometer

Description:
AFRICA (Automated Flow Reaction Incubation Control Apparatus) with FLLEX and PCM.

Description:
Glass oven Kugelrohr with accessories

Description:
Meat and fish products formation equipment

Description:
Hydrothermal processing of materials under high pressure system

Description:
The hydraulic compression testing machine

Description:
Equipment of Dairy Thermal Treatment in Ultra High Temperature

Description:
X-ray fluorescence spectrometer TIGER S 8

Description:
Turbo molecular vacuum system (end vacuum ~10 -7 mbar)

Description:
Automated aminoacids analyzer

Description:
microscope

Description:
Robotino is a mobile robot system with an omnidirectional drive, a learning system for basic and further training, and a research and development platform for universities and colleges, all in one system. Modularity means that all technical components of Robotino, such as the electric drive units, sensors and camera, can be directly understood and can also be learned within their integrated system behaviour. Trainees integrate and apply many technical features and functions, such as electric drive engineering, kinematics, sensors, control technology, vision systems and programming techniques.

Description:
Device for replication of holograms

Description:
dynamic microhardness meter

Description:
vacuum evaporation unit

Description:
Biomedical signal acquisition and analysis system BIOPAC BSLBME-W including 4 channel universal programable biosignal amplifiers, biomedical sensors and software.

Description:
Sensor Training stand for analog and discrete signal processing using a linear, angle turn, optical, proximity sensors. Investigated the strain gage force and torque sensor, set the nonlinearities. RTD tested position sensors. Tested optical position sensor and sets its properties.

Description:
Koala is a mid-size robot designed for real-world application research. Bigger than Khepera, more powerful, and capable of carrying larger accessories, Koala has the functionality necessary for use in practical applications (like sophisticated battery management), rides on 6 wheels for indoor all-terrain operation, and sports stylish bodywork for attractive demonstrations. In addition to these new features, Koala retains a shape and structure similar to Khepera, such that experiments performed on Khepera can be migrated to Koala. The BIOS of both robots is compatible, permitting programs written for one robot to be easily adaptted and recompiled for the other.

Description:
Polymer characterization system - molecular sieve chromatograh

Description:
HPLC system

Description:
Thermal Analyser Perkin Elmer TGA4000

Description:
UV Vis spectrometer Lambda 35

Description:
Ultrasound generator K8-1

Description:
Mass detector and liquid chromatography system

Description:
Thermal eveporation system integrated into the glove-box

Description:
System SPECTRUM GX 2000 RAMAN Nr.68891, HATR ACCESSORY FOR SPECTRUM GX

Description:
Flexible manufacturing simulation stand with Festo programmables controls. Programmable controllers managed system includes data processing and analysis of the transport conveyor, shafts and wheels assembly stations, CNC milling machines, CNC lathes, imaging camera. The entire control system over the network software is managed from the control panel.

Description:
Stand allows you to receive a DC electric actuators and mechanical characteristics of the various operating modes. Examine the foreign excited motor control performance resulting from the mechanical characteristics of the engine exhaust and dynamic braking. Tested the motor speed control by changing the flow of excitation. Derived by combining the mechanical characteristics of the engine as a coherent excitation machine and as a mixed excitation machine.

Description:
Spincoater, hotplate and UV curing lamp for formation of thin films

Description:
ICP deep reactive etching system,

Description:
Zwick Roell Materials Testing Machine BDO-SBO.5TH

Description:
Optical Motion Capture system for measurements and analysis of movements CONTEMPLAS (two digital videocameras, software for measurements and data processing)

Description:
The data collection and vibration measuring device VIBROTEST 60

Description:
Water vapour absorption test apparatus STD 478 (f. SATRA), Nr. 478-6-0512

Description:
The portable measurement and data processing unit Pulse 3560

Description:
Products of combustions gas components analyzer

Description:
Physiological parameters monitoring system

Description:
Spectrum analyser

Description:

T-Rex is designed specifically for the industrial milling machine, engraving, cutting.

Description:
Friction/peel tester

Description:
Hardness tester

Description:
Device of determination of paper (paperboard) surface smoothness

Description:
Device for multiplication of holograms

Description:
Climatic chamber

Description:
A spectrum analyzer (150 kHz - 3 GHz ) measures the magnitude of an input signal versus frequency within the full frequency range of the instrument. The primary use is to measure the power of the spectrum of known and unknown signals.

Description:
Device for roughness measurement of mechanical surfaces

Description:
Laser ellipsometer L115

Description:
Langmuir-Blodgett trough and control system

Description:
UV-VIS spektrometer

Description:

NanoScan SMPS nanoparticle sizer 3910. This portable, real-time instrument combines the NanoScan SMPS and the Optical Particle Sizer to quickly and accurately measure particles ranging three orders of size magnitude from 10 nanometers to 10 micrometers. 

Description:
Portable mobile system Noraxon for measurement of biomechanical parameters. Amplifier with Bluetooth interface with PC where software for data acquisition and processing is installed and a set of transducers

Description:
Ultra low temperature freezer

Description:
electronically controlled oven ULE 400

Description:
ELISA automated system

Description:
Nucleic acid extraction system

Description:
Sartorius BP221S electronic analytical balance

Description:
Module for analysis the dynamic attributes of flavour (taste and aroma), texture and color.

Description:
Stand of oil compostion analysis (for study process)

Description:
Universal optical spectroscopy and laser microfabrications system

Description:
HPLC equipment with automatic nitrogen determination by the Kjeldahl method and quantitative fat extraction solvent systems

Description:
Electric power quality analyser M12192

Description:
Thermovision camera

Description:
IL 1700 Research Radiometer

Description:
Netzsch 409 PC Luxx simultaneous thermal analysis instrument with ceramic sample handlers and crucibles of Pt-Rh.

Description:
Dilatometer L75H1600C

Description:
Preparative chromatography system

Description:
X-ray diffractometer for powder and layers ADVANCE D 8

Description:
optical microscope Axiolmager Z2

Description:
Solid-liquid extraction pilot plant SLA/EV

Description:
FT-IR spectrometry system

Description:
Liophylisator SPI Industries Sentry 2.0

Description:
Diferential scanning calorimeter

Description:
Photoelectron spectrometer

Description:

The spectrophotometric test determines the light absorption of a substance as a function of wavelength. It is most commonly used to determine the light absorption of various liquids, solutions and transparent solids (as the concentration of coloring compounds in a material changes, so does the light absorption). The material is illuminated with light of a certain wavelength (190-1100 nm) and the intensity of light transmitted through the layer of analyte is measured.

Description:

An integrated concentration meter for gaseous pollutants and particles is designed to monitor air quality parameters. Determination of concentrations of carbon monoxide, carbon dioxide, nitrogen dioxide, ozone, volatile organic compounds, aerosol particles in ambient and indoor air. The air flow is distributed and drawn through different measurement cells and the measured values are recorded (measurement interval 2 min).

Description:
Wearable device for monitoring human physical activity parameters MinimaxX (model v2.OPCB)

Description:
Scanning probe microscopy system JPK NanoWizard 3

Description:
Process parameters (level, flow) measurement and control using Siemens SIMATIC S300 programmable logic controller. Stand for student training and practical research. (Studentų st. 50-164)

Description:

ELPI+™ enables measurement of real-time particle size distribution and concentration in the size range of 6 nm – 10 µm with 10 Hz sampling rate. The ELPI+™ features include real-time stand-alone operation, wide particle size range and robust structure for operation even in harsh conditions. The use of impactor technology enables post-measurement chemical analysis of size classified particles. In addition, the ELPI+™ can be used for real-time particle charge distribution and gravimetric impactor measurements. All these features enable the use of the ELPI+™ instrument in a wide range of particle measurement applications.

Description:
Spectroscopic ellipsometer

Description:
Technological Equipment of Cheese Small-scale Production

Description:
Fermentation Kit- BioFlo 110 M1273-1162

Description:
Solid-Liquid Extractor

Description:
Spiral mixers (DIOSNA SP 24 F

Description:
Platilab 110 H

Description:
Works with KT1000131M HPLC-MS

Description:
Acoustic spectrophotometer

Description:
Particle size analyzer

Description:
Baking oven MIWE Condo

Description:
Spectrophotometer