Search

Spectrum analyser

Description: Spectrum analyser

Technical specification: 150 kHz to 1GHz

Usage area: spectrum analysis

Keywords: spectrum

Fermentation Kit- BioFlo 110 M1273-1162

Description: Fermentation Kit- BioFlo 110 M1273-1162

Technical specification: total volume 3,0 liters, working volume 0,8-2,2 liters, mixing, 200-240 V

Usage area: Microorganism cultivation

Keywords: fermentation, cultivation

Spiral mixers (DIOSNA SP 24 F

Description: Spiral mixers (DIOSNA SP 24 F

Technical specification: output 24 kg, working volume 45 liters

Usage area: dough mixing

Keywords: dough mixing

Platilab 110 H

Description: Platilab 110 H

Technical specification: temp. range -40C-90C; working volume 110 liters

Usage area: storage of microorganisms

Keywords: freezing, storage

Centrifugal Vacuum Concentrator/Freeze Dryer

Description: Centrifugal Vacuum Concentrator/Freeze Dryer

Technical specification: Low speed vacuum centrifuge: 1800rpm. Heated compartment temperature range: 30 to 60°C. Minimum pressure rating: <15hPa. Temperature minimum -110°C

Usage area: freeze-drying

Keywords: freeze-drying

Solid-Liquid Extractor

Description: Solid-Liquid Extractor

Technical specification: Number of extraction places: 4;valume of basic vessels: 200 ml; recommended working volume: 4x100 ml; Max . temperature: max. 200 °C

Usage area: Extraction

Keywords: extraction

Acoustic spectrophotometer

Description: Acoustic spectrophotometer

Technical specification: worging frequency range 4-80 kHz, measurement time 10 s

Usage area: Porous system structure analysis

Keywords: acoustics

SafTest system

Description: SafTest system

Technical specification: Measures percent fat i all food matrices; 570/690 filter for the ParoxySafe and AciSafe, and 550/690 filter for the AldeSafe and AlkalSAfe

Usage area: SafTest system is tests for determine lipid quality and freshness.

Keywords: Quality of fat

Spectrophotometer

Description: Spectrophotometer

Technical specification: UV range 190-1100 nm

Usage area: absorbance measurement

Keywords: spectrophotometer

Dough forming mashine

Description: Dough forming mashine

Technical specification: uotput 120 goods/h, 1.2 kW

Usage area: dough forming

Keywords: dough forming

One-screw extruder Inbramaq “LABOR PQ-30”

Description: One-screw extruder Inbramaq “LABOR PQ-30”

Technical specification: output 20-25 kg extruded products/h, 220-380 V, 1760 rpm, 60 Hz, 5 temperature zones: I-20C, II- 40C, III-60C, IV-80C, V-100C

Usage area: production of extruded products

Keywords: extruded products

Baking oven MIWE Condo

Description: Baking oven MIWE Condo

Technical specification: 3 baking chambers, output 72-120 baked goods/h, 35 kW

Usage area: baking experiments

Keywords: baking, oven

Thermo - chamber MIWE

Description: Thermo - chamber MIWE

Technical specification: working volume 0.98 m3

Usage area: proofing

Keywords: proofing

Vacuum-packaging machine HEFESUS Atchena SLB

Description: Vacuum-packaging machine HEFESUS Atchena SLB

Technical specification: output 240 packages/h, 1.5 kW

Usage area: packaging

Keywords: packaging

Electrophoresis unit OmniPAGE

Description: Electrophoresis unit OmniPAGE

Technical specification: Proteins separation using SDS-PAGE

Usage area: Proteins analysis

Keywords: Unit dimension 19 x 13 x 15 cm; gel size 7.5 x 8 cm; 2 gels; 8 samples per gel

Particle size analyzer

Description: Particle size analyzer

Technical specification: Static light scattering. Measuring from 0,1 to 2000 micrones.

Usage area: Accurate and rapid particle size measurements

Keywords: Particle size distribution, particle size

Texture analyser TA.XT plus (Stable Micro System, UK) with load cell, platform and basic software

Description: Texture analyser TA.XT plus (Stable Micro System, UK) with load cell, platform and basic software

Technical specification: Capacity - 50 kg, speed range - 0.01 - 40mm/s. Equipped with cutting, bending, extrusion, tension, penetration probes

Usage area: Measurement of textural properties of foods and cosmetics

Keywords: Textural properties

Works with KT1000131M HPLC-MS

Description: Works with KT1000131M HPLC-MS

Technical specification: Works with KT1000131M HPLC-MS

Usage area: Works with KT1000131M HPLC-MS

Keywords: HPLC-MS

High performance liquid chromatograph

Description: High performance liquid chromatograph

Technical specification: chromatographic separation of mixtures Maximum pressure up to 5000 psi, maximum flow rate up to 10 ml/min, UV range 190-500 nm.

Usage area: quantitative analysis of individual compounds in mixtures

Keywords: HPLC

Accelerated solvent extraction

Description: Accelerated solvent extraction

Technical specification: Automated extractor with possibility to use different size extraction cells and three different solvents.

Usage area: Accelerated solvent extraction

Keywords: Accelerated solvent extraction

Fermenters

Description: Fermenters

Technical specification: fermenters with working volume 35-500 ml and 300-1200 ml, infrared radiation is used to warm the culture; does not require cooling water. used to warm the culture;

Usage area: Fermentation and cultivation with bacteria, yeasts or fungi.

Keywords: Laboratory fermenters, microbiological culture, fermentation

Electrophoresis technique SDS-PAGE.

Description: Electrophoresis technique SDS-PAGE.

Technical specification: 160x(140-160-200-220)mm

Usage area: Proteins separation using SDS-PAGE

Keywords: Proteins analysis

Bottle filler

Description: Bottle filler

Technical specification: Semi automatic bottle filler; flexible filling of different 0,3-1 L glass bottles possible

Usage area: Beer filling into the glass bottles

Keywords: Beer filling

Meat and fish products formation equipment

Description: Meat and fish products formation equipment

Technical specification: Vacuum Stuffer“Frey” F-Line F 55. Fully electronic continual vacuum stuffer for STRAIGHTFILLING, PORTIONING and LINKING with swiveling linking gear and Global drive. Filling power up to 2.900 kg/hour. Housing and hopper completely made of stainless steel. Filling hopper divisible 100 liters or 60 liters. Filling pressure up to max. 25/35 bar. Integrated vacuum system and water separator electronically locked step (optionally). Vacuum pump 16 m³/hour. Portioning range 5 - 100.000 g (5 - 999 g in 0,1 g steps). Portioning speed max. 300 portions/min. Clipper MC12/. Works with clips C1212, C1214 Stainless steel. Base dimensions: 25 x 27cm Straight or crossed clip closing. Magazine capacity 250 clips.

Usage area: Meat and fish products formation

Keywords: Meat and fish technology

Supercritical extractor

Description: Supercritical extractor

Technical specification: Pilot scale (10 L) supercritical fluid extraction system with separators and possibility to add entrainer.

Usage area: Supercritical extraction

Keywords: Supercritical extraction

Supercritical extractor

Description: Supercritical extractor

Technical specification: Laboratory (50mL, 500mL) supercritical fluid extraction system with separators and possibility to add entrainer.

Usage area: Supercritical extraction

Keywords: Supercritical extraction

Water activity measurement, CR400 CR-400, Konica Minolta

Description: Water activity measurement, CR400 CR-400, Konica Minolta

Technical specification: aw measurment from 0.05 to 0.95

Usage area: Water activity measurement

Keywords: Water activity

Equipment of Dairy Components Concentration

Description: Equipment of Dairy Components Concentration

Technical specification: Membrane filtration equipment (4 flat sheet membranes; max. inlet pressure: 7 bar; max. operating temperature: 80 °C; pH rage: 1-14; cross-flow: 3-10 l/min); spray dryer (inlet air temp.: 40-230 °C; drying air throughput: from 100 to 300 m3/HR; peristaltic pump with flow rate up to 32 ml/min); sublimator (9 drying programs with steps (temperature, pressure and time); volume: 95 l; capacity: 5 kg/24 h; shelf temp.: till 80 °C)

Usage area: Membrane filtration equipment is used for dairy and whey ultra-and micro-filtration; Spray dryer - for drying of dairy products by hot spraying method; sublimator - for drying of dairy and other foods by sublimation (in cold and vaccum) method.

Keywords: Microfiltration; Ultrafiltration; Drying; Freeze-drying; Sublimation

Equipment of Dairy Thermal Treatment in Ultra High Temperature

Description: Equipment of Dairy Thermal Treatment in Ultra High Temperature

Technical specification: Small-scale pasteurization and sterilization flow system (thermal treatment temperature: till 150°C; holding time: from 2 s till 2 min; average capacity: 10l/h; pressure: 1-5 bar; weight volume hopper: 5 l; tubular and plate heat exchangers)

Usage area: Thermal treatment of raw milk (pasterization, sterilization and ultra hight thermal treatment (UHT))

Keywords: Milk pasterization, Sterilization; UHT

Technological Equipment of Cheese Small-scale Production

Description: Technological Equipment of Cheese Small-scale Production

Technical specification: Cheese vessel (capacity: 50 l; temperature rage: 4-90 °C; with cheese harp); cheese press (max. capacity: 50 kg; pressure: up to 10 bar; pneumatic); climatic chamber (temperature and relative humidity control); automated multipurpose and pressure vessel (internal volume: 20 l; temperature inside the container: up to 140 ° C, pressure: till 3 bar, automatic temperature and pressure control, three types of mixers)

Usage area: The production of various types of cheese, their formation, removal of whey; cheese ripening in the regulated environment.

Keywords: Curd cheese; Fermented cheese, Melted cheese; Cheese ripening

Gas analyser OPTIMA7 BIOGAS

Description: Gas analyser OPTIMA7 BIOGAS

Technical specification: Operatiing temperature 5-45 °C, max. 95 % RH, measurement range: 0-21 vol. % O2, 0-100 vol. % CH4, 0-60 vol. % CO2

Usage area: O2, CH4, CO2 measurements in gas

Keywords: O2, CH4, CO2, gas

Potentiostat mAUTOLAB

Description: Potentiostat mAUTOLAB

Technical specification: Potential range /- 5 V, Current ranges 10 mA to 10 nA

Usage area: Electrochemical investigations of organic materials, evaluation of energy levels of organic molecules

Keywords: oxidation-reduction potential, jonizacjos potencialas, elektroninio giminingumo energija

Comprehensive LECO GC´GC-TOFMS 4D system

Description: Comprehensive LECO GC´GC-TOFMS 4D system

Technical specification: Comprehensive GC´GC system with time-of-flight TOFMS detector

Usage area: Determination and identification of volatiles in the liquid samples and in the headspace of samples (vapour phase)

Keywords: GC´GC system

UV Vis spectrometer Lambda 35

Description: UV Vis spectrometer Lambda 35

Technical specification: UV-Vis spedtrum registration 200-1000 nm

Usage area: Electronical spectrum of solutions registration 200-1000 nm

Keywords: UV-Vis

Hybrid mass spectrometer

Description: Hybrid mass spectrometer

Technical specification: Separation of cpompounds and recording of UV spectra in the range of 200-500 nm, and MS spctra in the range of 20-8000 m/z with the accuracy of less than 1 ppm.

Usage area: Chromatographic separation of compounds and quantitative or qualitative analysis of individual compounds

Keywords: UPLC-MS

Distiller Buchi Glass Oven B-585

Description: Distiller Buchi Glass Oven B-585

Technical specification: Temperature range 40-300oC; drying volume upto 250 ml; Kugelroh distillation volume from 5 to 40 ml

Usage area: Equipment for distillation, sublimation, freeze-drying or drying of organic materials in vacuum

Keywords: sublimation, drying, distillation, vacuum

Set of equipment for sublimation

Description: Set of equipment for sublimation

Technical specification: Possible ammounts for sublimation is up to 100 g; achievable vacuum up to 10-3 mbar, condenser could cooled by water

Usage area: Sublimation of the organic materials

Keywords: sublimation

Biodegradability measuring complex

Description: Biodegradability measuring complex

Technical specification: Measuring range (oxygen concentration) from 0 to 4.0 mg / l.

Usage area: Measuring of biochemical oxygen demand

Keywords: Biochemical oxygen demand, biodegradability

Optical tensiometer (contact angle meter)

Description: Optical tensiometer (contact angle meter)

Technical specification: Measuring range 0-180o, 0.01-1000mN/m

Usage area: Optical tensiometer allow direct measurements of surface tension, interfacial tension, contact angles. It is possible to get information on material properties such as: wettability, absorption, surface free energy, adsorption, spreading.

Keywords: surface, contact angle, surface tension

Preparative chromatography system

Description: Preparative chromatography system

Technical specification: Liquid or Solid Sample Modes, Solid Injection: up to 75g; 4 Independent channels with up to four solvents in a single run; Combination of up to 2 UV signals plus ELSD with slope and/or threshold detection.

Usage area: Purification of organic materials

Keywords: Flash chromatography, purification, organic materials, preparative scale

Spectrophotometer GENESYS 8

Description: Spectrophotometer GENESYS 8

Technical specification: 190-1100 nm

Usage area: Spectrophotometric analysis

Keywords: Spectrophotometry

Yeast fermentation bioreactor

Description: Yeast fermentation bioreactor designed to carry. The equipment consists of: bioreactor, dosing pump, 4 Bio control unit. Culture medium maintained at a temperature, pH, and air.

Technical specification: 7 l geometric volume control, temperature, pH and O².

Usage area: Bioprocess, Modeling and control. Systems of biotechnology

Keywords: Bioreactor, fermentation, Automatic control

Termoconstanter for aw measurement

Description: Termoconstanter for aw measurement

Technical specification: accuracy ±0.01aw, ±0.2°C, resolution ±0.001aw, ±0.1°C, repeatability ±0.005aw

Usage area: aw measurement

Keywords: water activity aw

Luminescence spectrometer Perkin Elmer LS-55

Description: Luminescence spectrometer Perkin Elmer LS-55

Technical specification: Excitation spectra wavelength range: 200-800 nm; emission spectra wavelength range: 200-650 nm.

Usage area: For recording of luminescence spectra of solutions and hard samples

Keywords: Fluorescence, phosphorescence

Drug dissolution test

Description: Drug dissolution test

Technical specification: 6 places

Usage area: Drug release studies

Keywords: Drug release

FTIR spectrometer Perkin Elmer Frontier

Description: FTIR spectrometer Perkin Elmer Frontier

Technical specification: Spectrum range: 600-4000 nm.

Usage area: For recording of FTIR spectra of hard samples

Keywords: FTIR spectra

Shrinkage temperature determination instrument

Description: Shrinkage temperature determination instrument

Technical specification: Instrument is suitable for hide/skin/leather shrinkage temeprature determination under 100 degrees.

Usage area: Instrument for leather shrinkage temperature mesearment under 100 degree (ISO 3380).

Keywords: Leather, shrinkage temperature

Leather processing equipment containing 1) apparatus for leather tanning process imitation and 2) shaker for solutions preparation

Description: Leather processing equipment containing 1) apparatus for leather tanning process imitation and 2) shaker for solutions preparation

Technical specification: Leather processing equipment containing 1) apparatus for leather tanning process imitation and 2) shaker for solutions preparation

Usage area: Equipment is suitable for leather processing in laboratory conditions and for solutions preparation for analysis

Keywords: Leather, processing, shaker

Dielectrical spectrometer Agilent E4980A Precision LCR meter

Description: Dielectrical spectrometer Agilent E4980A Precision LCR meter

Technical specification: Temperature interval: -60 - 300°C.

Usage area: Measurements of dielectrical properties of materials

Keywords: Dielectrical properties

Thermal Analyser Perkin Elmer TGA4000

Description: Thermal Analyser Perkin Elmer TGA4000

Technical specification: Temp.range 30-1000 ºC, heating rate 0.1-100 ºC/min, nitrogen or oxygen environment.

Usage area: For mass loss analysis by heating

Keywords: Thermogravimetry

Kugelrohr distillation system

Description: Kugelrohr distillation system

Technical specification: temperature range 20-200 °C, distillate volume - 1-330 ml.

Usage area: Liquids distillation under oil pump vacuum. Sample range per single run - 1-330 ml.

Keywords: kugelrohr, distillation.

Automated Soxhlet extraction

Description: Automated Soxhlet extraction

Technical specification: 2 ceramic heating plates; Extraction thimbles - 130 ml; Volume of Soxhlet glass chamber - 190 ml.

Usage area: Fat extraction for fat determination. Continuous extraction of solids.

Keywords: extraction, soxhlet

Constant climate chamber Memmert GmbH HCP-246

Description: Constant climate chamber Memmert GmbH HCP-246

Technical specification: Temp.range 20 - 90 ºC, ±0.1°C; humidity range 20-95 %, ±1%.

Usage area: Environment simulation

Keywords: Environmental simulation

Disperser IKA T 50 digital ULTRA-TURRAX

Description: Disperser IKA T 50 digital ULTRA-TURRAX

Technical specification: Speed range 600-10000 rpm; volume range 0.25-30 l

Usage area: Preparation of dispersions, emulsions

Keywords: Dispersion

Polarizing microscope (Olympus BX41) with light source and hotstage

Description: Polarizing microscope (Olympus BX41) with light source and hotstage

Technical specification: Temperature range 150-420oC; Reflection and transmission modes; Polarizator; 50, 200, 500 X magnification. LED Light source for reflection mode. Photocamera.

Usage area: The observation of phase transitions of organic materials, investigation of phase transitions of liquid crystals, observation of the surfaces.

Keywords: microscopy, polarisation, liquid crystals

Spin Coater SPS SPIN-150

Description: Spin Coater SPS SPIN-150

Technical specification: Speed 0-10000 rpm, sample max. diameter 150 mm.

Usage area: For film casting

Keywords: Film casting, spin coating

Micro Viscoamylograph Brabender

Description: Micro Viscoamylograph Brabender

Technical specification: Temp.range 1-100 ºC, sample volume 100 ml

Usage area: For investigation of pasting properties of starch derivatives

Keywords: Starch, pasting, viscosity

Melt flow rate meter Thermo C-Flow

Description: Melt flow rate meter Thermo C-Flow

Technical specification: Temp.range 50- 400 ºC, extrusion barrel: diameter 9.55 mm, length 170 mm.

Usage area: For determinastion of melt flow rate of thermoplastics

Keywords: Thermoplastics, melt flow rate

Melting point apparatus

Description: Melting point apparatus

Technical specification: Melting or boiling point range 30-400°C

Usage area: Melting point determination of crystalline compounds. Boiling point determination under atmospheric pressure.

Keywords: Melting point, boiling point

Melting point apparatus

Description: Melting point apparatus

Technical specification: Melting or boiling point range 30-400°C

Usage area: Melting point determination of crystalline compounds. Boiling point determination under atmospheric pressure.

Keywords: Melting point, boiling point

Glass oven Kugelrohr with accessories

Description: Glass oven Kugelrohr with accessories

Technical specification: Temperature range: 30-300°C. Appropriate amount of substance per cycle: 0,5-40 ml.

Usage area: For distillation, sublimation, drying, freeze drying under vacuum down to 0,01 mbar and temperature limit to 300 °C. For distillation of viscous liquids.

Keywords: kugelrohr, distillation, sublimation, drying, freeze drying.

Glass oven Kugelrohr with accessories

Description: Glass oven Kugelrohr with accessories

Technical specification: Temperature range: 30-300°C. Appropriate amount of substance per cycle: 0,5-40 ml.

Usage area: For distillation, sublimation, drying, freeze drying under vacuum down to 0,01 mbar and temperature limit to 300 °C. For distillation of viscous liquids.

Keywords: kugelrohr, distillation, sublimation, drying, freeze drying.

Turbo molecular vacuum system (end vacuum ~10 -7 mbar)

Description: Turbo molecular vacuum system (end vacuum ~10 -7 mbar)

Technical specification: End vacuum - 1•10-7 mbar; Pumping speed for N2 - 35 l/s; Compression ratio for N2 - 1·1011; External vacuum sensor; Flange (in) - 40 ISO-KF.

Usage area: Drying of solids, desorption, sublimation.

Keywords: Sublimation, drying, turbo molecular pump.

Turbo molecular vacuum system (end vacuum ~10 -7 mbar)

Description: Turbo molecular vacuum system (end vacuum ~10 -7 mbar)

Technical specification: End vacuum - 1•10-7 mbar; Pumping speed for N2 - 35 l/s; Compression ratio for N2 - 1·1011; External vacuum sensor; Flange (in) - 40 ISO-KF.

Usage area: Drying of solids, desorption, sublimation.

Keywords: Sublimation, drying, turbo molecular pump.

Spectrophotometer Konica Minolta CM-5

Description: Spectrophotometer Konica Minolta CM-5

Technical specification: Standard observer at 2° ir 10°; standard illuminant C and D65; color spaces L*a*b, L*C*h, Hunter Lab, Yxy, XYZ, Munsell and color differences

Usage area: Determination of color characteristics

Keywords: Color characteristics

Microbial Oxidative Degradation Analyzer Saida FDS Inc. MODA-6

Description: Microbial Oxidative Degradation Analyzer Saida FDS Inc. MODA-6

Technical specification: Temperature interval: 45 - 65°C; 6 reaction columns.

Usage area: Assesment of biodegradability of materials under aerobic conditions according to CO2 emission

Keywords: Biodegradability, aerobic conditions, carbon dioxide

Vacuum sublimation equipment

Description: Vacuum sublimation equipment

Technical specification: vacuum up to 0,001 mbar by LN freezing. Sublimation modules for amounts from 1 to 100 g sample of material.

Usage area: For sublimation, freeze drying, drying, removing of residual solvents of solid materials.

Keywords: sublimation, drying, freeze drying.

Preparative chromatography system Sepacore Line C-600

Description: Preparative chromatography system Sepacore Line C-600

Technical specification: Controlled pump flow rate - 2,5 – 250 ml/min; Pump working pressure limits - 0 – 50 bar; UV detection spectral range - 190 – 740 nm; UV detection limits 0,001-5 A

Usage area: Preparative chromatographic purification of organic compounds, pure compounds separation under isocratic or gradient flow. Automated purification process.

Keywords: preparative chromatography

X-ray single crystal diffraction spectrometer

Description: X-ray single crystal diffraction spectrometer

Technical specification: X-Ray power source: 50W of rays power. Double focuse optic. Detector: sensitivity not less than 175 e-/photon. Low temperature module with lowest temperature value 200K. Dry air module up to –70°C dew point and flexible airflow rate not less than 25L/min. Dynamic range > 1:20000. 16 000 000 pixels.

Usage area: Single crystal research. Determination of molecular structure.

Keywords: Single crystal, X-ray

FT-IR spektrometer

Description: FT-IR spektrometer

Technical specification: Optic range: 8000-350 cm-1. Signal-to-noise ratio >8000:1. Resolution: <0,4 cm-1. Wave length precision <0,01 cm-1 (at 2000 cm-1). Accessories for transmission measurement. Accessories for ATR measurements. ATR spectral database of industrial compounds.

Usage area: Liquid, solid and gaseous phase infrared spectral measurements. Compound search in spectral database.

Keywords: FT-IR spectrometer

FT-IR spectrometer with RAMAN module

Description: FT-IR spectrometer with RAMAN module

Technical specification: Measurement under vacuum (3,5 mbar) or under atmospheric pressure. Optical spectral range - 8000-50 cm-1. Signal-to-noise ratio - 8500:1. Resolution: >0,18 cm-1. Wavelength tolerance <0,01 cm-1 (at 2000 cm-1). Accessory for transmission measurement. Platinum ATR accessory. Compound search in spectral database. Accessory for variable temperature measurement in range -190 to +250°C. RAMANO spectra. Laser 1064 nm, emmition power 0,5 W. Resolution for RAMAN spectra >0,5 cm-1. 3D RAMAN scanning.

Usage area: Liquid, solid and gaseous phase infrared spectral measurements. Compound search in spectral database. Transmition spectral research in temperature range from -190 to +250°C. RAMAN spectra of solid and liquid compounds. 3D RAMAN scanning. Qualitative RAMAN and IR spectral analysis.

Keywords: IR, FT-IR, MID-IR, FAR-IR, RAMAN, Spectral date base, variable temperature IR

Balances for big weights, model: MSE 12201S-0CE

Description: Balances for big weights, model: MSE 12201S-0CE

Technical specification: Weighing capacity:12000g; Readability: 0,1 g; Repeatedability: ≤±0,05 g. Linearity: ±0,1 g.

Usage area: to weight metal vessel and reactors

Keywords: Balances

Analytical balances (0,001 mg) and balances table

Description: Analytical balances (0,001 mg) and balances table

Technical specification: Weighing capacity:31g; Readability: 0,001 mg; Repeatedability: ±0,002 mg. Average response time - 15 s. Pan size - Ø 30 mm.

Usage area: For precise weighing of micro analytical samples.

Keywords: Micro balances

Photochemical reactor, Ace Glass

Description: Photochemical reactor, Ace Glass

Technical specification: Volume of the reaction vessel - 250 mL; Operating volume - 125 mL; Power of light source - till 450 W.

Usage area: Radical reactions in solution

Keywords: photochemical reactor, UV

Microwave reactor with hydrogenation module, Discover LabMate, CEM

Description: Microwave reactor with hydrogenation module, Discover LabMate, CEM

Technical specification: Microwave radiation power - 300 W. Temperature regulation from - 90 °C till +300 °C. Volume of reaction vessel working at the atmospheric pressure till 125 mL. Pressure adjustment and regulation range from 0 till 20 bar. Adapter for gaseous reagents

Usage area: To perform precision chemical reactions under microwave heating and tracking pressure. The reaction with gaseous reagents or inert conditions at elevated pressure.

Keywords: microwaves, gas addition module

Laboratory autoclave

Description: Laboratory autoclave

Technical specification: MT 250/4, 250 KV, 2.8 bar, 141°C, 45 L.

Usage area: sterilize equipment, culture media and other objects

Keywords: sterilization

spincoater, Chemat Technology Spin-Coater KW-4A

Description: spincoater, Chemat Technology Spin-Coater KW-4A

Technical specification: 2-Stage spinning: 500-2500 rpm; 1000-8000 rpm. Chucks for different size substrates

Usage area: Thin film formation from solution on the substrate

Keywords: spin coating, thin film

Cyclic voltammetry apparatus (potentiostat), Bio-logic Sas SP-150

Description: Cyclic voltammetry apparatus (potentiostat), Bio-logic Sas SP-150

Technical specification: Current ranging: 10 μA to 800 mA Current resolution: 760 pA. Control voltage: ±10 V. Compliance: 20 V range adjustable from [-20;0] V to [0;+20] V. Voltage resolution: 5 μV EIS measurement from 10 µHz to 1 MHz.

Usage area: Cyclic voltammetry, determination of oxidation reduction potentials of te organic materials

Keywords: potentiostat, CV, cyclic voltammetry

Spectrofluorimeter for measuring steady state luminescence spectra and quantum yields in the UV – NIR spectral range with single photon counting sensitivity. Spectrometer for measuring fluorescence lifetimes spanning the range from picoseconds to microseconds based on the technique of time correlated single photon counting, Edinburgh Instruments FL920

Description: Spectrofluorimeter for measuring steady state luminescence spectra and quantum yields in the UV – NIR spectral range with single photon counting sensitivity. Spectrometer for measuring fluorescence lifetimes spanning the range from picoseconds to microseconds based on the technique of time correlated single photon counting, Edinburgh Instruments FL920

Technical specification: Lifetime range: 100ps – 50μs (time correlated single photon counting). Fluorescence red sensitive detector (200 – 870nm).

Usage area: Measurement of fluorescence spectra and quantum yields of liquid and solid samples. Measurement of fluorescence lifetime of liquid and solid samples.

Keywords: fluorescence, quantum yield, fluorescence lifetime

Pressure filtration vessel

Description: Pressure filtration vessel

Technical specification: Internal diameter: 142 mm, Flow: ∆p = 1 bar for water ≥2 l/min pro 0,2 μm, ≥4,5 l/min pro 0,45 μm, ≥11 l/min pro 0,8 μm membrane Filtration area: 130 cm² Max. Working pressure: ≥7 bar

Usage area: Filtration of viscous liquids, sterile filtration

Keywords: Pressure filtration

Interferometer, MarSurf WS 1

Description: Interferometer, MarSurf WS 1

Technical specification: High-precision, non-contact measurement of surface texture. Optical surface sensor operates on the basis of white-light interferometry. This technology enables rapid, high-precision recording of surface topography on a wide range of materials. Vertical resolution 0.1 nm. Measuring range (vertical) 100 μm.

Usage area: Surface topography measurements

Keywords: interferometry, surface topography

Nanosecond laser flash photolysis measurement system

Description: Nanosecond laser flash photolysis measurement system

Technical specification: Nanosecond laser NL301G-10-SH-TH-FH (up to 10 mJ), UV-spectrophotometer IJ, fiber, UV-IJ source

Usage area: Investigations of photochromic compounds in solution using nanosecond laser pulses

Keywords: flash photolysis

Microwave reactor with hydrogenation module, Discover LabMate, CEM

Description: Microwave reactor with hydrogenation module, Discover LabMate, CEM

Technical specification: Microwave radiation power - 300 W. Temperature regulation from - 90 °C till 300 °C. Volume of reaction vessel working at the atmospheric pressure till 125 mL. Pressure adjustment and regulation range from 0 till 20 bar. Adapter for gaseous reagents

Usage area: To perform precision chemical reactions under microwave heating and tracking pressure. The reaction with gaseous reagents or inert conditions at elevated pressure.

Keywords: microwaves, gas addition module

AFRICA (Automated Flow Reaction Incubation Control Apparatus) with FLLEX and PCM.

Description: AFRICA (Automated Flow Reaction Incubation Control Apparatus) with FLLEX and PCM.

Technical specification: Completely chemically inert synthesis environment. Four independent liquid-filled pumps with a debit control from 2.5 to 2500 ul / min range. Maximum system pressure up to 20 bar. 1 1/4, 1/16 ml micro reactors with 2 or 3 of the liquid inlet. Two thermostats: 0-150 ° C and 40-250 ° C temperatures. Liquid extraction module. Reagent input module. Clean solvent was added to the module. The product manifold. Software manages the performance of chemical processes.

Usage area: Investigations of homogeneous chemical processes. Reaction performance under unusual conditions: very rapid mixing, the suspension is very fast, quick analysis, implementation absolute terms, highly exothermic reactions, the use of precise control of the reaction parameters of performance. Multistep reaction performance. Precise reaction optimization process of production. Quick extraction performance.

Keywords: micro reactor, micro extractor, flow chemistry

Schleibinger Geräte GmbH VICASONIC ultrasound apparatus

Description: Schleibinger Geräte GmbH VICASONIC ultrasound apparatus

Technical specification: 10 imp./s speed and 54kHz frequency

Usage area: investigation of cement stone properties

Keywords: ultrasound analysis

equipment of powder homogenizing WAB TURBULA T2F

Description: equipment of powder homogenizing WAB TURBULA T2F

Technical specification: mixing of Powder material of all types

Usage area: Powder material mixing

Keywords: Powder material homogenizing

sieve analysisi instrumen Sonic Sifter

Description: sieve analysisi instrumen Sonic Sifter

Technical specification: sieve from 3 µm to 5,6 mm

Usage area: sieve analysis

Keywords: sieve analysis

Netzsch 409 PC Luxx simultaneous thermal analysis instrument with ceramic sample handlers and crucibles of Pt-Rh.

Description: Netzsch 409 PC Luxx simultaneous thermal analysis instrument with ceramic sample handlers and crucibles of Pt-Rh.

Technical specification: heating rate of 15°C/min, the temperature ranged from 30°C to 1000°C under a nitrogen atmosphere

Usage area: DSC-TG analysis

Keywords: DSC-TG

Keywords: f

Fixed bed adsorption unit FBAU/EV

Description: Fixed bed adsorption unit FBAU/EV

Technical specification: CO2 reducer flow 0-1 l/min, heli - 0-5 l/min. heat element 0,5 kW

Usage area: Investigation of adsorption properties of materials.

Keywords: adsorbtion

Spray dryer MSD/EV

Description: Spray dryer MSD/EV

Technical specification: Peristaltic pump 0-1,5 l/h. 3 kW heat element. Temperature range 280 °C

Usage area: obtaining solid matter particles from suspensions

Keywords: suspension, drying

Heat transfer pilot plant with tube-in-tube, shell-and-tube and plate exchangers SCTA/EV

Description: Heat transfer pilot plant with tube-in-tube, shell-and-tube and plate exchangers SCTA/EV

Technical specification: Flowmeters 0-1000 l/h, 4-20 mA sygnal

Usage area: heat transfer processes analysis in heat exchangers

Keywords: Heat transfer

Solid-liquid extraction pilot plant SLA/EV

Description: Solid-liquid extraction pilot plant SLA/EV

Technical specification: Pump 0-12 l/h. Screw speed 0-10 min-1

Usage area: selective components of the extraction solvents extractive phase equilibrium and kinetic studies

Keywords: extraction

tray dryer apparatus TD/EV

Description: tray dryer apparatus TD/EV

Technical specification: Fan 0-1400 min-1, power 0.3 kW. 9 heat element each 300 W

Usage area: convection material drying

Keywords: drying

liquid mixing apparatus LM/EV

Description: liquid mixing apparatus LM/EV

Technical specification: Mixer 140 W, 30-1000 min-1

Usage area: liquid mixing

Keywords: liquid mixing

Filter press and micro filter pilot plant FP-1S/EV

Description: Filter press and micro filter pilot plant FP-1S/EV

Technical specification: Pump 0-128 l/h. 3 manometers 0-6 bar, 4-20 mA sygnal

Usage area: filtration of suspension with filter press and microfilter

Keywords: filtration

Centrifugal pumps in series and parallel test bench BP-1S/EV

Description: Centrifugal pumps in series and parallel test bench BP-1S/EV

Technical specification: Centrifugal pump 0-15 m3/h, 0-3000 min-1

Usage area: settings of various pump parameters

Keywords: pump

Liquid-liquid extraction pilot plant LLA/EV

Description: Liquid-liquid extraction pilot plant LLA/EV

Technical specification: Mixer 0-1000 min-1, pump 0-34 l/h

Usage area: valuable or toxic substances produced by the solutions, the concentration of the solutions.

Keywords: solution, extraction

Spectrophotometer T70, PG Instruments limited

Description: Spectrophotometer T70, PG Instruments limited

Technical specification: Wavelength 190-1100 nm; Sample Module 8 Cell

Usage area: Determination of P, Fe

Keywords: UV/VIS

Microscope Olympus SZX7 for crystals

Description: Microscope Olympus SZX7 for crystals

Technical specification: 40x zoom

Usage area: Crystal analysis

Keywords: Optical microscope, crystal analysis

Continuous distillation pilot plant DCA/EV

Description: Continuous distillation pilot plant DCA/EV

Technical specification: Heat elements 300 and 2500 W. Pump 0-12 l/h

Usage area: separation of heterogeneous mixtures of liquids

Keywords: distillation

Thin film evaporation pilot plant ESSA/EV

Description: Thin film evaporation pilot plant ESSA/EV

Technical specification: Pump 0-24 l/h. Vakuum pump 0,7 kW. 0-1500 min-1, mixer power 1 kW

Usage area: Exclusion of salt from solutions and the heat balance studies.

Keywords: evaporation

Double-effect falling-film evaporation pilot plant EDEA/EV

Description: Double-effect falling-film evaporation pilot plant EDEA/EV

Technical specification: Pump 0-34 l/h

Usage area: separation of solvent from solutions, material concentration and mass and energy transfer processes analysis

Keywords: crystallization

optical microscope Axiolmager Z2

Description: optical microscope Axiolmager Z2

Technical specification: Magnification up to 500 times.

Usage area: The study of materials surface and texture

Keywords: optical microscope

Transmitter RTD-200 is converting the signals from the measuring cell.

Description: Transmitter RTD-200 is converting the signals from the measuring cell.

Technical specification: measuring range humidity from 0.05 to 1.00 aw

Usage area: aw measurement

X-ray diffractometer for powder and layers ADVANCE D 8

Description: X-ray diffractometer for powder and layers ADVANCE D 8

Technical specification: Vertical goniometer, Theta/2Theta or Theta/Theta geometry. Max. usable angular range: –110° < 2Theta ≤168°. Smallest addressable increment: 0.0001°. Instrument alignment: Equal or better than ± 0.01° 2Theta; NIST SRM 1976a. Maximum angular speed 20°/s. Point detector: Scintillation counter with graphite monochromator, 1-D detector: LYNXEYE with Ni-filter.

Usage area: powder,liquids, thin films X-ray analysis

Keywords: X-ray analysis

bending testing machine

Description: bending testing machine

Technical specification: the accuracy class - 1 (DIN EN ISO 7500-1)

Usage area: bending testing machine

Keywords: Compression- and bending tests

Climatic chamber

Description: Climatic chamber

Technical specification: capacity - 350 l. humidity 60 -95 % rH. Temperature range -20ºC- 50ºC

Usage area: for environmental conditions maintenance

Keywords: Climatic chamber

Analytical electronic balance, "Radwag MXA 5", (d=1µg)

Description: Analytical electronic balance, "Radwag MXA 5", (d=1µg)

Technical specification: Maximum sample weight - 5g. Scaling value - 1μg. Weighing repeatability - `3μg.

Usage area: Sample mass measurements (0 – 5g, d=1µg).

Keywords: Analytical balance

Spectrophotometer "GENESYS 8"

Description: Spectrophotometer "GENESYS 8"

Technical specification: Wavelength range - 190-1100nm. Accuracy - <1nm.

Usage area: Sample UV-VIS spectroscopy analysis.

Keywords: UV-VIS spectroscopy analysis.

Gas chromatograph with TCD detector

Description: Gas chromatograph with TCD detector

Technical specification: Alltech CTR 1 column, maximum available operating temperature 275° C

Usage area: Quantitative and qualitative analysis of gases (O2, N2, CH4, CO2, CO)

Keywords: GC-TCD

Linseis TMA PT1000 Thermomechanical Analyzer

Description: Linseis TMA PT1000 Thermomechanical Analyzer

Technical specification: Temperature interval - from room temperature to 1000 °C; sample size - 30 mm; force - from 1 to 5.7 N; frequency - from 1 to 5 Hz

Usage area: The evaluation of changes in the sample dimensions (volume) by applying constant or alternating mechanical load while the substance is subjected to a controlled temperature program in a specified atmosphere. These tests can be performed: visco-elastic behavior, deformation, 3 point bending test, change of volume and penetration.

Keywords: Thermomechanical analysis

Differential scanning calorimeter DSC214Polyma

Description: Differential scanning calorimeter DSC214Polyma

Technical specification: Temperature interval: from -30 to 600 °C; min. heating rate - 0.001 °C/min.

Usage area: The evaluation of energy, which is needed to uniform sample`s and reference`s temperatures while the substance is subjected to a controlled temperature under specified atmosphere. This method allows to determine: specific heat, melting temperature, the change of enthalpy, glass transition temperature, decomposition temperature and other thermal conversions.

Keywords: Differential scanning calorimetry

PersonalDataRAM - pDR-1000AN. Measures concentrations of dust, smoke, mists and fumes in real-time

Description: PersonalDataRAM - pDR-1000AN. Measures concentrations of dust, smoke, mists and fumes in real-time

Technical specification: Aerosol concentration measurement range - 0.001 to 400.0mg/m3. Particle size range for maximum accuracy - 0.1 to 10μm.

Usage area: Measurements of personal exposure to aerosol particles in the workplace.

Keywords: Aerosol particles

Optical aerosol particle counter, Handheld IAQ 3016

Description: Optical aerosol particle counter, Handheld IAQ 3016

Technical specification: Measuring range - 0.3-10.0 µm. Flow rate - 2.83 l / min. Measuring the number of channels - 6 (0.3, 0.5, 1.0, 2.5, 5.0, 10.0 μm). The maximum instantaneous concentration - 140 particles/cm3.

Usage area: Aerosol particle dispersion composition in indoor and outdoor air (0.3 - 10.0μm).

Keywords: Aerosol particles.

Gas chromatograph with FID detector CLARUS 500

Description: Gas chromatograph with FID detector CLARUS 500

Technical specification: Alltech AT-WAX capillary column, maximum available operating temperature 260 °C

Usage area: Quantitative analysis of volatile and semi-volatile organic compounds

Keywords: GC-FID

UV/VIS spectrophotometer Lambda 25

Description: UV/VIS spectrophotometer Lambda 25

Technical specification: Measuring range from 190 to 1100 nm

Usage area: UV/VIS absorption/transmittance spectra

Keywords: UV/VIS absorption, UV/VIS transmittance

Spectrometer AANALYST400

Description: Spectrometer AANALYST400

Technical specification: D2 background correction, flame acetylene-air or acetylene-nitrous oxide

Usage area: Quantitative analysis of metal solutions by atomic absorption and atomic emission spectroscopy methods

Keywords: AAS

Autolab PGSTAT12 Potentiostat/Galvanostat 

Description: Autolab PGSTAT12 Potentiostat/Galvanostat 

Technical specification: low noise potentiostat/galvanostat capable of measuring or applying a maximum current of 250 mA, with a compliance voltage of 12 V and the possibility to do iR-compensation

Usage area: Electrochemical research, voltammetric analyses

Keywords: Electrochemical analysis

Gas chromatograph-mass spectometer CLARUS 500

Description: Gas chromatograph-mass spectometer CLARUS 500

Technical specification: Elite-5MS capillary column, maximum available operating temperature 330/360 °C

Usage area: Quantitative and qualitative analysis of volatile and semi-volatile organic compounds

Keywords: GC-MS

Mass spectometer CLARUS 500

Description: Mass spectometer CLARUS 500

Technical specification: Electron impact ionization, ionization energy 70eV

Usage area: Detector in CLARUS GC-MS system

Keywords: MS

Indoor air quality monitor "Aeroqual IQM 60"

Description: Indoor air quality monitor "Aeroqual IQM 60"

Technical specification: Gaseous pollutant name - measuring range; the lowest detection limit. CO2 - 0-2000 ppm; 6 ppm. CO - 0-100 ppm; 0.2 ppm. NO2 - 0-0.2 ppm; 0.001 ppm. VOC - 0-20 ppm; 0:01 ppm. O3 - 0-0.5 ppm; 0.001 ppm. Particle counter - 8 channels from 0.3 to 10.0μm.

Usage area: Measurements of carbon monoxide, carbon dioxide, nitrogen dioxide, ozone, volatile organic compounds, and aerosol particle concentrations at ambient and indoor air.

Keywords: Carbon monoxide, carbon dioxide, nitrogen dioxide, ozone, VOCs and PM.

PersonalDataRAM - pDR-1000AN. Measures concentrations of dust, smoke, mists and fumes in real-time

Description: PersonalDataRAM - pDR-1000AN. Measures concentrations of dust, smoke, mists and fumes in real-time

Technical specification: Aerosol concentration measurement range - 0.001 to 400.0mg/m3. Particle size range for maximum accuracy - 0.1 to 10μm.

Usage area: Measurements of personal exposure to aerosol particles in the workplace.

Keywords: Aerosol particles

Heating Circulators, Julabo HE-4

Description: Heating Circulators, Julabo HE-4

Technical specification: Working temperature range 20-250 °C±0.01; Volume 3-4.5 l

Usage area: Temperature control

Keywords: Thermostatation

Flame Photometer, PFP7, operating and Service Manual

Description: Flame Photometer, PFP7, operating and Service Manual

Technical specification: Limits of Detection: Na, K-0.2 ppm; Ca-15 ppm

Usage area: Determination of Ca, Na, K

Keywords: Flame photometric analysis

Programmable rapid distillation system with external titratinion, Gerhardt

Description: Programmable rapid distillation system with external titratinion, Gerhardt

Technical specification: Digestion; Distillation; Automatic titration; Combined pH electrode

Usage area: Determination of N

Keywords: Nitrogen

Laboratory centrifuge for tubes LMC-3000

Description: Laboratory centrifuge for tubes LMC-3000

Technical specification: 3000 rpm

Usage area: Wide range of analytical applications

Keywords: centrifuge

Compact Lab Fluid Bed Dryer/Granulator/Coater

Description: Compact Lab Fluid Bed Dryer/Granulator/Coater

Technical specification: Control of Spray Solution, of Air Flow, of Temperature

Usage area: Solid Material Granulation, coating

Keywords: Granules, Film

Resistance Meter

Description: Resistance Meter

Technical specification: The Measuring Range from 0,1 Ω to 20 GΩ, possibility to measure thermostated sample from -50 to 50 °C

Usage area: Measurement of surface resistance

Keywords: Surface electrical resistance, electrical conductivity

Cintra 202 - UV-Visible Spectrometer

Description: Cintra 202 - UV-Visible Spectrometer

Technical specification: Spectral scans from 190 to 1200nm, determination of the color characteristics in CIELAB color space

Usage area: measuremen of absorption, transmmitance, color in CIELAB space

Keywords: absoption, transmmitance, CIELAB color spase

Binocular microscope

Description: Binocular microscope

Technical specification: 110 V, T500 mA, 60 Hz, P 10X18

Usage area: a light microscope that is adapted to the use of both eyes which uses visible light and a system of lenses to magnify images of small samples

Keywords: microscopy, binocular

water purification system

Description: water purification system

Technical specification: purified water conductivity 0.1-1.0 uS/cm

Usage area: water purification for analytical purposes

Keywords: water purification

spactrophotometr GENESYS 5

Description: spactrophotometr GENESYS 5

Technical specification: Spectral slitwidth 5nm, split-beam dual detectors, measure absorbance, transmittance and concentration, range from 200 to 1100nm, accuracy ±1nm, precision ±0.5 nm, scan speed 300nm/min or 900nm/min

Usage area: Meaurement of optical absorbance, transmittance, UV/VIS spectra registration

Keywords: optical absorbance, transmittance, UV spectrum

Polarimeter ADP 220

Description: Polarimeter ADP 220

Technical specification: Measuring range from -30 to +120 °, display resolution 0.01 °Z, repeatability ±0.1°Z

Usage area: fully automatic polarimeter suitable for measuring the rotation of optically active samples.

Keywords: polarimetry, sucrose

Cooling incubator

Description: Cooling incubator

Technical specification: IP20, 1/PE AC, 230 V, 50/60Hz, 1.35 kW

Usage area: device used to grow and maintain microbiological cultures

Keywords: incubation, microbiological cultures

Sartorius BP221S electronic analytical balance

Description: Sartorius BP221S electronic analytical balance

Technical specification: Weighing capacity 120g, readability 0.0001g, standard deviation £±0.0001

Usage area: Weighing for analytical purpose

Keywords: weighing, readability 0.0001g

Ultra low temperature freezer

Description: Ultra low temperature freezer

Technical specification: MDF-192, -20°C -86°C, 86 L, 400 W, 121 kg.

Usage area: freezer, which can be maintained at very low temperatures

Keywords: products, model systems, texture, texture profile

Automatic digital refractometer ATAGO RX 5000C

Description: Automatic digital refractometer ATAGO RX 5000C

Technical specification: measurement range: refractive index 1.32700 to 1.58000, Brix 0.00 to 95.00%. Accuracy IR ±0.00004, Brix 0.03%

Usage area: Brix and refractive index measurement

Keywords: refractive index, soluble solids

Universal Texture Analyser Instron 3343

Description: Universal Texture Analyser Instron 3343

Technical specification: Texture analyser with one column, specious force range up to 5 kN, fitted force bodies 1kN and 0,5kN, 1067 mm vertical working ares. Working bodies intended to press, cut, bend, break and spread

Usage area: Intended for texture analysis of the products with soft and hard texture. Possibility to analyse texture of the food and other groups products

Keywords: f

Thermostat MIR-253

Description: Thermostat MIR-253

Technical specification: (FL15D) 15W, 218 W, DC30 V, 2 A, 104 kg, 254 L.

Usage area: device used to grow and maintain microbiological cultures

Keywords: incubation, microbiological cultures

Laminar flow closet

Description: Laminar flow closet

Technical specification: 20 °C, 230 V~, 50 Hz, 1400 W, 60.1 dB(A) <0.005 mm(RMS), >900 lux.

Usage area: laminar flow closet is a carefully enclosed bench designed to prevent contamination of semiconductor wafers, biological samples, or any particle sensitive device

Keywords: laminar flow

Autoclave Laboclav

Description: Autoclave Laboclav

Technical specification: 3N 400V - (+/-5%), 20 Hz, 16A, 4.5 kW, 5 kWh, 143°C, 100L.

Usage area: sterilize equipment, culture media and other objects

Keywords: sterilization

Working bodies intended for Universal Texture Analyser Instron 3343

Description: Working bodies intended for Universal Texture Analyser Instron 3343

Technical specification: Working bodies intended to press, cut, bend, break

Usage area: Texture analysis of the products and model systems with soft and hard texture.

Keywords: products, model systems, texture, texture profile

High performance liquid chromatograph vith mass spectrometer

Description: High performance liquid chromatograph vith mass spectrometer

Technical specification: Separation of mixtures into individual compounds and recording of their UV and MS spectra. Maximum pressure up to 5000 psi, maximum flow rate up to 10 ml/min, UV range 200-700 nm, MS range 20-2000 m/z.

Usage area: Separation of mixtures and quantitative and qualitative analuysis of indivisual compounds

Keywords: HPLC-MS

Climatic chamber

Description: Climatic chamber

Technical specification: Storage the products in controlled conditions: temperature (-10 -100 °C, without regulation of the humidity and 10°- 90°C with regulation of the humidity from10 % till 90%. Operating volume 102 litres.

Usage area: Keeping the samples in the selected and simulated conditions of tje temperature and humidity. Possibility the simulation of the two different treatment at the same time (in the separate chambers).

Keywords: products, model systems, storage conditions, temperature, humidity

Equipment for the determination of volatile compounds (gas chromatograph) with clean air generator, GC solution software

Description: Equipment for the determination of volatile compounds (gas chromatograph) with clean air generator, GC solution software

Technical specification: accuracy ±1%, thermostat temperature to 250 ºC/min, maximum temperature 450°C. The reproducibility of 0.3%, autosampler for liquid samples, FID detector with a 250Hz scanning frequency

Usage area: Determination of volatile compounds and other substances

Keywords: GC, FID

ELISA automated system

Description: ELISA automated system

Technical specification: Multiscan EX mikroplates reader wavelenght interval 400-750nm, accuracy £1% at 405nm, 96-well microtiter plate, Ascent softvare. Titramax 1000 vibrating shaking with heating for 6 plates, 65°C, orbit 1.5 mm.

Usage area: ELISA tests

Keywords: ELISA reader and shaking

The CR-400 handheld chroma meter (color measuring instrument )

Description: The CR-400 handheld chroma meter (color measuring instrument )

Technical specification: handheld, can be used on a variety of surfaces (hard, semi hard, liquid). With 8mm aperture size. d/0 (diffuse illumination/0° viewing angle; specular component included) Within ΔE*ab 0.07 standard deviation

Usage area: food products, cosmetics, medical, packaging

Keywords: color characteristics, CIELAB, food matrices

Module for analysis the dynamic attributes of flavour (taste and aroma), texture and color.

Description: Module for analysis the dynamic attributes of flavour (taste and aroma), texture and color.

Technical specification: The data of sensory analysis and consumer research are gathered directly from each booth by internet or by filling paper answer forms, data are keeped and analysed in the main server by applying different statistical methods. Test reports are concluded in the final stage.

Usage area: The integrated evaluation of the food matrixes dynamic attributes of the flavour , texture and color, which involves the planning of experiment, test methods database, simulation of the test session, integrated statistical analysis of the data, integrated databases of the panelists and consumers.

Keywords: products, model systems, texture, texture profile

Automated aminoacids analyzer

Description: Automated aminoacids analyzer

Technical specification: HPLC system with fluorescence detector and precolumn/postcolumn derivatization

Usage area: Quantitative and qualitative composition of amino acids

Keywords: HPLC, fluorescence, amino acids

Amplification equipment

Description: Amplification equipment

Technical specification: 50/60 Hz, 250 V, Max Power 420 VA

Usage area: Duplication of genetic material

Keywords: amplification

Nucleic acid extraction system

Description: Nucleic acid extraction system

Technical specification: 50/60 Hz, 250 V

Usage area: DNA and RNA isolation from test samples

Keywords: nucleic acid, extraction

Thermostat with cooling

Description: Thermostat with cooling

Technical specification: IPP260, 230V~, 2.3 A, 50/60 Hz, 525 W.

Usage area: device used to grow and maintain microbiological cultures

Keywords: incubation, microbiological cultures

electronically controlled oven ULE 400

Description: electronically controlled oven ULE 400

Usage area: heating and drying of samples

Keywords: heating, drying

muffle oven

Description: muffle oven

Technical specification: electrical input 3600W, 230 V, 50 Hz, maximum temperature value 1100°C

Usage area: mineralization of food samples

Keywords: mineralization

Pocket Goniometer PG-2

Description: Pocket Goniometer PG-2

Technical specification: dimensions (LxWxH) 160x55x42 mm; integrated camera; 15 images/sec

Usage area: Determination of weting angle and surface treament level of printing and packaging materials

Keywords: Wetting angle, surface treament level

Keywords: f

Keywords: f

Zwick Roell Materials Testing Machine BDO-SBO.5TH

Description: Zwick Roell Materials Testing Machine BDO-SBO.5TH

Technical specification: fiber tension up to 100 N

Usage area: textile testing

Keywords: cyclic tension, , elongation

Spectrophotometer SF450X W/UV

Description: Spectrophotometer SF450X W/UV

Technical specification: Measuring Delta E

Usage area: textile testing

Keywords: spectrophotometer

Spectrophotometer XRite Color Digital

Description: Spectrophotometer XRite Color Digital

Usage area: Press the control parameters

Keywords: Color setting

Keywords: f

martindale testing machine

Description: martindale testing machine

Technical specification: martindale test

Usage area: textile testing

Keywords: abrasion, pilling

Microscope DPM 300

Description: Microscope DPM 300

Technical specification: Resolution 1280 x 1024 Pixels

Usage area: Image Analysis Software with Digital Pocket

Keywords: Automatic Image Analysis

Zwick Roell Materials Testing Machine

Description: Zwick Roell Materials Testing Machine

Technical specification: tension up to 5kN

Usage area: Textiles testing

Keywords: cyclic tension, friction, elongation

Keywords: f

InfraCAM SD

Description: InfraCAM SD

Technical specification: Accuracy 2%; 25°x25° field of view; thermal sensitivity 0,12°C; temperature measurment range -10°C÷ 350°C

Usage area: Control of printing technological process and quality

Keywords: Thermovision, printing quality control

KPP Flexo Proofer

Description: KPP Flexo Proofer

Technical specification: Printing speed up to 40 m/min; print size 400x500 mm

Usage area: Flexo proofing on flexible materials

Keywords: Flexography, proofing

Friction/peel tester

Description: Friction/peel tester

Technical specification: Load cell 0.5-2 kg; measurement accuracy ±0.25%; testing speed up to 20 mm/min

Usage area: Determination of paper/film friction coefficient; peel researches of adhesive materials

Keywords: Friction coefficient; peel

Stand of granular solid fuel burining test

Description: Stand of granular solid fuel burining test

Usage area: Only for the study process

Keywords: f

Paste Ink Proofer

Description: Paste Ink Proofer

Technical specification: Print size 75x245 mm; printing speed 5-40 m/min; pressing 0-150 N/cm

Usage area: Proofing on paper

Keywords: Proofing

FAG BRAI³ Braille Dot Checker

Description: FAG BRAI³ Braille Dot Checker

Technical specification: Camera 1.3 MPixel BW 0 USB2.0, resolution of 1.7 μm / pixel, field of view of 2.2 mm × 1.8 mm rectangular form

Usage area: Braille geometrical parameters

Keywords: Braille dot

Keywords: f

Keywords: f

Keywords: f

Keywords: f

Keywords: f

Hardness tester

Description: Hardness tester

Technical specification: Vickers micro hardness

Usage area: hardness measurement

Keywords: hardness measurement

Keywords: f

Keywords: f

Extensometers

Description: Extensometers

Technical specification: Measuring base 25 mm

Usage area: Measurement of strain s

Keywords: strain, measurment

Laser centering device

Description: Laser centering device

Technical specification: centering in 2 planes

Usage area: centering of shafts

Keywords: centering of shafts

Optical Motion Capture system for measurements and analysis of movements CONTEMPLAS (two digital videocameras, software for measurements and data processing)

Description: Optical Motion Capture system for measurements and analysis of movements CONTEMPLAS (two digital videocameras, software for measurements and data processing)

Technical specification: Two digital videocameras (mini DV camcorders Panasonic NV-GS330, 3CCD), synchronically transmitting the view of the object marked with light reflecting markers to the personal computer with dada processing software Templo Standart; set of spherical light reflective markers

Usage area: Measurements and analysis of movements of mechanical and biomechanical systems, (gait analysis, work, sports or casual activities etc.)

Keywords: Biomechanics, Motion capture, Videocamera, Marker

microscope

Description: microscope

Technical specification: up to 500x

Usage area: metalogrphic analysis

Keywords: metalogrphic analysis

Keywords: f

Keywords: f

Keywords: f

Hardness tester

Description: Hardness tester

Technical specification: Vickers, Rockwell, Brinell

Usage area: hardness measurement

Keywords: hardness measurement

Keywords: f

Insulation agains heat apparatus IG/ISOC (f. GIULIANI), Nr. 13917

Description: Insulation agains heat apparatus IG/ISOC (f. GIULIANI), Nr. 13917

Technical specification: The temperature of the hot plate of 150 oC

Usage area: Determination of insulation agains heat according to LST EN ISO 20344

Keywords: Insulation agains heat

Water vapour permeability test equipment STM 473 (SATRA), Nr. 473-5-0512:

Description: Water vapour permeability test equipment STM 473 (SATRA), Nr. 473-5-0512:

Technical specification: Rotation frequency of 75 min-1

Usage area: Determination of water vapour permeability according to LST EN ISO 20344

Keywords: Water vapour permeability

Bally penetrometer STM 703 (f. SATRA), Nr. 703-1-0512

Description: Bally penetrometer STM 703 (f. SATRA), Nr. 703-1-0512

Technical specification: Diameter of cylinders of 30 mm

Usage area: Measuring the dynamic water resistance of leathers according to LST EN ISO 20344; LST EN 13518

Keywords: Water penetration, water absorption

Multifunctional device Test 445

Description: Multifunctional device Test 445

Technical specification: Humidity measuring range 0-100%; Pressure measurement range 0-2000 hPa; Temperature measurement range -30-200 ° C;

Usage area: Environmental parameters of temperature, pressure, humidity measurement

Keywords: Temperature, pressure, humidity.

Electrodynamic Vibration Excitter systems

Description: Electrodynamic Vibration Excitter systems

Technical specification: Max acceleration - 92 m/s2; Max speed 1300 mm / s; Max displacement (double amplitude) -19000 μm ¶. Vibration frequency range 5-5000 Hz.

Usage area: Vibration excitation of the vibration and shock tests. Environmental testing in accordance with the standards LST EN 60068-2-6:2008 (sinusoidal vibration), LST EN 60068-2-64:2008 ( broadband random vibration ), LST EN 60068-2-27:2009 (Shock).

Keywords: Exciters, vibrations

Elecrical resistance testing instrument (PEGASIL/ZIPOR), No. 50.130

Description: Elecrical resistance testing instrument (PEGASIL/ZIPOR), No. 50.130

Technical specification: Insulation resistance 10 Ω … 3 GΩ with measuring voltage 0 … 490 V DC

Usage area: Determination of electrical resistance according to LST EN ISO 20344

Keywords: Electrical resistance

Impact tester (PEGASIL/ZIPOR), Nr. 50.130

Description: Impact tester (PEGASIL/ZIPOR), Nr. 50.130

Technical specification: Impact energy: 0 ... 200 J, Striker: mass of 20 kg , The striker consist of the faces of which subtend an angle of 90o.

Usage area: Measurement of the impact resistance according to LST EN ISO 20344; LST EN 12568

Keywords: Impact resistance

Water vapour absorption test apparatus STD 478 (f. SATRA), Nr. 478-6-0512

Description: Water vapour absorption test apparatus STD 478 (f. SATRA), Nr. 478-6-0512

Technical specification: Volume of container of 100 cm3, internal diameter of 3.5 mm

Usage area: Determination of water vapour absorption according to LST EN ISO 20344

Keywords: Water vapour absorption

Keywords: f

Mask aligner MA-750

Description: Mask aligner MA-750

Technical specification: Wavelength: 360-440 nm, exposure area up to 150 mm (round)

Usage area: Mask alignement, UV exposure

Keywords: UV light, exposure

Keywords: f

Materials Testing Machine

Description: Materials Testing Machine

Technical specification: 25 kN

Usage area: Biomechanics

Keywords: Materials, Testing Machine

Treadmill

Description: Treadmill

Usage area: Biomechanics

Keywords: Running, Treadmill

Rowing trainer

Description: Rowing trainer

Usage area: Biomechanics

Keywords: Rowing

Keywords: f

Cardio trainer, bicycle

Description: Cardio trainer, bicycle

Usage area: Biomechanics

Keywords: Cardio trainer, bicycle

Electron beam lithography, electron microscope, energy dispersive spectroscopy

Description: Electron beam lithography, electron microscope, energy dispersive spectroscopy

Technical specification: Field emission cathode, acceleration voltage variable from 20 V to 30 kV, laser interferometer, dry vacuum system, sample size up to 102x102 mm, electron microscope, surface chemical analysis from Be (Z=4) to Am (95)

Usage area: Nanolithography, electron microscopy, surface chemical analysis

Keywords: Nanolithography, scanning electron microscopy, surface chemical analysis, EDX, EBL, EDS

Keywords: f

Keywords: f

3D Motion capture system

Description: 3D Motion capture system

Technical specification: to 500 Hz

Usage area: Biomechanics

Keywords: 3D Motion capture, Motion analysis

EMG

Description: EMG

Technical specification: 4 chanels, 1000 Hz

Usage area: Biomechanics

Keywords: electromiography, muscle activity

Keywords: f

Optical microscope NIKON (analyzer)

Description: Optical microscope NIKON (analyzer)

Technical specification: Magnification up to x1200, uncertainty of measurements do not exceeds (0.1 L/500) µm, where L is length of the structure under measurement.

Usage area: Measurement of linear dimensions of the transparent structures in manual and automatic modes with high fidelity

Keywords: Optical microscope, manual and automatic modes

Scale KERN PLE 310-3N

Description: Scale KERN PLE 310-3N

Technical specification: Max. weight 310 g, accuracy 0.001 g

Usage area: Weighing

Keywords: Mass, weighing

UV-VIS spektrometer

Description: UV-VIS spektrometer

Technical specification: UV-VIS spektrometer. Spekctral range 360-860 nm, spectral resolution 1.2 nm, USB2

Usage area: Reflection, transmission, absorption measurements in UV-VIS spectral range. Applied in refractive index kinetics measurement stand

Keywords: UV-VIS spectrometer

The fiber-optic spectrometer AvaSpec-2048

Description: The fiber-optic spectrometer AvaSpec-2048

Technical specification: Light source - deuterium and halogen. The spectral region 172-1100 nm, resolution - 1.4 nm. USB2

Usage area: Reflection, transmission, absorption measurements in UV-VIS-NIR spectral range. Liquids can be analyzed in the standard cell, hard transparent (measured transmission and the absorption) or vague (measured reflection) samples

Keywords: UV-VIS-NIR spektrometer

Optical and fluorescence microscope

Description: Optical and fluorescence microscope

Technical specification: Wide field oculars, digital imaging, UV fluorescence source

Usage area: Optical and fluorescence microscopy

Keywords: Optical microscope, fluorescence microscope

Lloyd`s mirror holographic lithography setup.

Description: Lloyd`s mirror holographic lithography setup.

Technical specification: Loyd`s mirror holographic lithography setup. The setup is capable to pattern structures with periods less than 500 nm

Usage area: Holographic lithography, micro-fabrication

Keywords: Laser, UV, holographic lithography, periodical structures, diffraction gratings, interference lithography, lithography, one dimensional, two dimensional three dimensional

Spincoater, hotplate and UV curing lamp for formation of thin films

Description: Spincoater, hotplate and UV curing lamp for formation of thin films

Technical specification: Two step spin-coating process (first 2-18 s, second 3-60 s) with two different speed intervals (first 500-2500 rpm, second 1000-8000 rpm). Hot plate temperature 30-300 deg C, sample size up to 6 inch, temperature resolution 0.1 deg C. UV lamp has 4x6W bulbs, wavelengths 264 nm, 365 nm. The sample up to 4 inch is rotated at 6 rpm.

Usage area: Spin-coater, hotplate, UV curing, thin layer deposition

Keywords: spin-coater, hotplate, UV lamp, thin layers, spin coating, layer formation, UV hardening, UV cross linking, drying

Atomic force microscope NT-206

Description: Atomic force microscope NT-206

Technical specification: operating modes: contact, tapping, non-contact. Lateral magnetic force microscopy. Static / Dynamic force spectroscopy. AFM characteristics: maximum scan field: 15x15μm; measurement matrix to 512x512 pixels, maximum height measurements are 2 micrometers, up to 15 mm in diameter and 5 mm high samples.

Usage area: For study the morphology and local mechanical properties of differents materials surfaces at the nano, micro-scale.

Keywords: AFM, scaning, morphology, topography

Universal optical spectroscopy and laser microfabrications system

Description: Universal optical spectroscopy and laser microfabrications system

Technical specification: Yb:KGW laser wavelength is 1030 nm, power 4W, pulse duration 290 fs, energy >0.2 mJ. Fabrication can be performed employing focused first harmonic (1030 nm) second harmonic (515 nm) or third harmonic (3436 nm) of the laser. Fabrication with controlled period (0.8-1.3 um) interference field of second harmonic (515 nm) is alse available in the system. Microfabrication can be performed in 160x160 mm area with 300 nm positioning precision. Speed of the XY tables is up to 300 mm/s, sample wight up to 3 kg. The pump wavelength range of the spectroscopic system is 315-2600 nm, the probe wavelength range is 480-1100 nm. Time resolution 16.67 fs, length of the delay line 1,8 ns, absorbtion detection limit 0.5 mOD

Usage area: Material mikro-/nano- fabrication with focused beam and measurements of absorbtion kinetics.

Keywords: Femtosecond laser, ultra fast laser, laser microfabrication, micromachining, ablation, laser drilling, laser marking, laser engraving, galvoscanner, second harmonic, third harmonic, direct ablation with interference field, holographic lithography, 515, 315, 1030, kinetic spectroscopy, pump-probe spectroscopy, differential absorption spectrometer, differential absorption, ultra fast spectroscopy

Energy dispersive X-Ray analysis

Description: Energy dispersive X-Ray analysis

Technical specification: Detectable elements from Boron (5) to Americium (95). Energy resolution 133 eV (Mn K alfa). Spatial resolution < 1 um3. Thermoelectric cooling.

Usage area: Determination of chemical composition , elemnt mapping

Keywords: Chemical composition, energy dispersion, element mapping, microanalysis, x-ray energy dispersion spectrometer, chemical element analysis, chemical element distribution, EDS, EDX

microwave plasma enhanced chemical vapor deposition system

Description: microwave plasma enhanced chemical vapor deposition system

Technical specification: plasma source diameter 6", power 6 kW frequeency 2.45 GHz homogeneous deposition area diameter 5 cm

Usage area: thin film and coating deposition

Keywords: thin film and coating deposition

Quartz dilatometer OKB-5A14

Description: Quartz dilatometer OKB-5A14

Technical specification: temperatures up to 800 C, the dimension dependence from temperature automatic recording

Usage area: glass material thermal expansion study

Keywords: glass thermal expansion

Fourier transform infrared spectrometer

Description: Fourier transform infrared spectrometer

Technical specification: Fourier transform infrared spectrometer spectra region 400-4000cm-1 Resolution - 1 cm -1. Measurement mode - transmittance, 30-degree reflection, diffuse reflection, total internal reflection (ATR)

Usage area: Characterization of molecules and mixtures, vibrational spectra identification. May be performed thin films, powders, liquid state materials research

Keywords: FTIR spektroskopy

Device for galvanoplastic multiplication

Description: Device for galvanoplastic multiplication

Technical specification: Formation of Ni film on polymeric surface

Usage area: Fabrication of Ni replica matrix with submicron (nanometric) precision and high diffraction efficiency of the final product.

Keywords: Galvanoplastic

vacuum evaporation unit

Description: vacuum evaporation unit

Technical specification: E-beam gun power up to 5 kW

Usage area: vacuum evaporation

Keywords: vacuum evaporation

solar spectra simulator

Description: solar spectra simulator

Technical specification: AM1.5

Usage area: measurement of photovoltaic properties

Keywords: measurement of photovoltaic properties

Device for replication of holograms

Description: Device for replication of holograms

Technical specification: Formation of relief with submicron (nanometric) dimensions on polymer surface.

Usage area: Formation of micro-relief on polymer surface

Keywords: Micro-relief

Rockwell hardness meter

Description: Rockwell hardness meter

Technical specification: loads 15,30,45 kgf

Usage area: hardness measurement

Keywords: hardness measurement

dynamic microhardness meter

Description: dynamic microhardness meter

Technical specification: loads 0.1 – 2000 mN

Usage area: microhardness and Young modulus testing

Keywords: microhardness and Young modulus testing

vacuum evaporation unit

Description: vacuum evaporation unit

Technical specification: E-beam gun power up to 5 kW

Usage area: vacuum evaporation

Keywords: vacuum evaporation

RF reactive ion etching system

Description: RF reactive ion etching system

Technical specification: power 3kW, homogeneous etching area diamater 15 cm

Usage area: reactive ion etching, surface microfabrication

Keywords: reactive ion etching, surface microfabrication

diamond like carbon ion beam synthesis system

Description: diamond like carbon ion beam synthesis system

Technical specification: ion energy 400-1000 eV

Usage area: diamond like carbon deposition

Keywords: diamond like carbon deposition

ion etching system

Description: ion etching system

Technical specification: homogeneous etching area diamater 8 cm

Usage area: ion beam etching, surface microfabrication

Keywords: ion beam etching, surface microfabrication

vacuum evaporation unit

Description: vacuum evaporation unit

Technical specification: E-beam gun power up to 5 kW

Usage area: vacuum evaporation, magnetron sputtering

Keywords: vacuum evaporation, magnetron sputtering

Mobile robot system Robotino

Description: Robotino is a mobile robot system with an omnidirectional drive, a learning system for basic and further training, and a research and development platform for universities and colleges, all in one system. Modularity means that all technical components of Robotino, such as the electric drive units, sensors and camera, can be directly understood and can also be learned within their integrated system behaviour. Trainees integrate and apply many technical features and functions, such as electric drive engineering, kinematics, sensors, control technology, vision systems and programming techniques.

Technical specification: Omnidirectional drive, max speed - 1m/s, max load - 15kg

Usage area: Robot motion control

Keywords: autonomous mobile robot

Fluxmeter F01

Description: Fluxmeter F01

Technical specification: mT,kA/m

Usage area: Magnetic field measurements

Keywords: Fluxmeter

Vector network analyzer

Description: Vector network analyzer

Technical specification: 9 kHz to 8,5 GHz

Usage area: Vector network analysis

Keywords: Network analysis

Temperature test chamber HD-BT-40B

Description: Temperature test chamber HD-BT-40B

Technical specification: The temperature range is not higher than -40 ° C or lower than 150 ° C Capacity of 25 l Defrost in the range from -40 ° C to 150 ° C no longer than 60 minutes. Chilling in the range from 20 ° C to -40 ° C no longer than 60 minutes.

Usage area: Temperature operating modes of embedded systems

Keywords: Embedded systems, temperature, operating modes

Network analyzer

Description: Network analyzer

Technical specification: 9 kHz to 8,5 GHz

Usage area: Network analysis

Keywords: Network analysis

Luminance meter LS-110

Description: Luminance meter LS-110

Technical specification: 0,01-999900 cd/m2

Usage area: Luminance measurement

Keywords: Photometer, luminance meter

RVG, sensor, program KDIS

Description: RVG, sensor, program KDIS

Technical specification: Program KDIS, sensor for X-ray

Usage area: X-ray sensor for odontology

Keywords: Sensor, odontology

TAM AIR III calorimeter.

Description: TAM AIR III calorimeter.

Technical specification: The range of measurement 600 mW, the sensitivity of the signal 4 ìW, the time constant 500 s,

Usage area: measurement of heat flow of processes

Keywords: calorimetric analysis

vibrating disc mill Pulverisette 9

Description: vibrating disc mill Pulverisette 9

Technical specification: ground particle size < 80 µm

Usage area: Rigid materials grinding (ability to reach ground particle size of <80 microns)

Keywords: Rigid materials grinding

The hydraulic compression testing machine

Description: The hydraulic compression testing machine

Technical specification: max. Compression force 1200 kN

Usage area: Determination of compressive and flexural strength of binding materials

Keywords: The compressive and flexural strength

CILAS 1090 LD laser scattering particle size distribution analyzer

Description: CILAS 1090 LD laser scattering particle size distribution analyzer

Technical specification: Size of measured particles 0,04-500 µm

Usage area: The particle size distribution

Keywords: The particle size distribution

Climatic chamber

Description: Climatic chamber

Technical specification: Storage the products in controlled conditions: temperature (-10 -100 °C, without regulation of the humidity and 10°- 90°C with regulation of the humidity from10 % till 90%. Operating volume 102 litres.

Usage area: Keeping the samples in the selected and simulated conditions of tje temperature and humidity. Possibility the simulation of the two different treatment at the same time (in the separate chambers).

Keywords: products, model systems, storage conditions, temperature, humidi

Frequency drive MDI AA 570 stand

Description: The stand consists of a frequency converter and powder braking device of the engine load switching. The load can be changed manually or set an automatic dependency. Load torque can be proportional to the square of the speed (fan characteristics) may be avirkščiai proportional to the speed.

Technical specification: Altivar71, 2HP, 1.5kW, 0...380V, 4.1A

Usage area: Frequency drive MDI AA 570 stand

Keywords: Frequency response, drive, MDI AA 570

Sepacore Basic Flash System, Buchi Labortechnik

Description: Sepacore Basic Flash System, Buchi Labortechnik

Technical specification: recorder, UV detector, sample inlet block, manifold, column KX16

Usage area: Proteins isolation

Keywords: Ion exchange chromatography

Works with KT1000130M HPLC

Description: Works with KT1000130M HPLC

Technical specification: Works with KT1000130M HPLC

Usage area: Works with KT1000130M HPLC

Keywords: UV

Voice telephony signaling protocols converter

Description: Voice telephony signaling protocols converter

Technical specification: T1 to T1, T1 to E1, E1 to E1

Usage area: Telephone networks merging

Keywords: ISDN, PSTN, gateway

Meat and fish texture modeling equipment

Description: Meat and fish texture modeling equipment

Technical specification: Manual hand injector Ingmat. Suitable for bone in and boneless product. Powerful self priming plastic pump Handy

Usage area: Meat and fish texture modeling

Keywords: Meat and fish technology

Spin coater for the formation of thin layers

Description: Spin coater for the formation of thin layers

Technical specification: Spin speed up to 10000 rpm, duration 1-999 s, temperature 50 - 250ºC, area up to 230x230 mm

Usage area: Thin film formation

Keywords: Spin coating, thin polimer films, photolithography, drying

UV laser

Description: UV laser

Technical specification: Wavelength 375nm, power 15 mW

Usage area: Holographic lithography, micro-fabrication

Keywords: Laser, UV, holographic lithography, periodical structures, diffraction gratings, interference lithography, lithography, one dimensional, two dimensional three dimensional

Osciloscope

Description: Osciloscope

Technical specification: 100 MHz frequency band, 2 channels, 200 Msa sampling frequency

Usage area: Measurement of electrical signals charactersitics

Keywords: Osciloscope

High performance liquid chromatograph

Description: High performance liquid chromatograph

Technical specification: chromatographic separation of mixtures Maximum pressure up to 5000 psi, maximum flow rate up to 10 ml/min, UV range 190-500 nm.

Usage area: quantitative analysis of individual compounds in mixtures

Keywords: HPLC

CE440 Elemental Analyser

Description: CE440 Elemental Analyser

Technical specification: Accuracy: With standard organic compounds, ±0.15% absolute plus ±0.15% relative Sample Size: Typically 1-5 mg; up to 500 mg for samples with low carbon content Analysis Time: Less than 5 minutes for CHN Range: 100 ppm to 100% Detector: Thermal conductivity System Sensitivity: ±1 microvolt Analytical Sensitivity: Less than 1 microgram

Usage area: combustion analysis

Keywords: combustion analysis

Analytical balances

Description: Analytical balances

Technical specification: Weighing capacity: 220/100; Readability: 0,1/0,01 mg; Repeatedability: ≤±0,02/0,1 mg. Linearity: ≤±0,03/0,2 mg.

Usage area: weighing of samples for analysis

Keywords: balances, analytical

Physiological parameters monitoring system

Description: Physiological parameters monitoring system

Technical specification: ECG, pulse

Usage area: Physiological parameters systemcreation and development

Keywords: ECG, pulse

Benchtop chemical crystallography system XtraLab mini (Rigaku)

Description: Benchtop chemical crystallography system XtraLab mini (Rigaku)

Technical specification: Mercury CCD detector, power 600W

Usage area: investigation of monocrystals of organic and inorganic materials, study of crystal cage, identification of the chemical structure

Keywords: monocrystal, crystal cage, x-ray diffraction

Ultrasound generator K8-1

Description: Ultrasound generator K8-1

Technical specification: Ultrasound frequenz 850kHz

Usage area: For dispersion of materials of liquid materials

Keywords: Ultrasound, generator

Absorption pilot plant ADSA/EV

Description: Absorption pilot plant ADSA/EV

Technical specification: Gas reducers 0-600 Nl/h and 0-6000 Nl/h. Pump 0-270 l/h

Usage area: Excretion of components of gas mixtures, gas cleaning from harmful impurities, gas drying, gas and liquid phases of the system equilibrium and kinetics.

Keywords: Absorption

Potentiostat/Galvanostat BioLogic SP-150 for fundamental electrochemistry, sensors, corrosion, energy sources coatings investigations

Description: Potentiostat/Galvanostat BioLogic SP-150 for fundamental electrochemistry, sensors, corrosion, energy sources coatings investigations

Technical specification: Current ranging: from 10 µA to 1 A and from 1 µA to 1 nA; Control voltage: ±10 V; EIS: 10 µHz to 1 MHz

Usage area: Fundamental electrochemistry, Sensors, Corrosion, Energy sources, Coatings investigations

Keywords: Potentiostat-galvanostat, electrochemical impedance spectroscopy

Equipment of Dairy Mechanical Processing

Description: Equipment of Dairy Mechanical Processing

Technical specification: Separator (max. capacity: 40 l/val; max. rotating speed: 8500 min-1); homogenisator (flow rate: 10-22 l/h; pressure: till 1000 bar; stages: two); butter churn (working capacity: 4-12 l; working rotation speed: 140 rpm)

Usage area: Separator is used for separation of lipids from raw milk; homogenisator - for preparation of homogeneous emulsions and splitting of milk fat droplets; butter churn - for production of butter and spreads

Keywords: Separation; Homogenisation; Butter churning

Media Gateway

Description: Media Gateway

Technical specification: 4xE1, H.323, SIP, VoIP (30 channel), 2x10/100 Base-T

Usage area: VoIP network, signaling gateway

Keywords: Media Gateway, VoIP, H.323

UV/VIS spectrophotometer Lambda 35

Description: UV/VIS spectrophotometer Lambda 35

Technical specification: Measuring range from 190 to 1100 nm, the ability to measure the surface reflection spectra

Usage area: UV/VIS absorption/transmittance, surface reflectance spectra

Keywords: UV/VIS absorption, UV/VIS transmittance, UV/VIS surface reflectance

UV/VIS spectrophotometer Lambda 25

Description: UV/VIS spectrophotometer Lambda 25

Technical specification: Measuring range from 190 to 1100 nm

Usage area: UV/VIS absorption/transmittance spectra

Keywords: UV/VIS absorption, UV/VIS transmittance

Device for multiplication of optical security marks MSM-1

Description: Device for multiplication of optical security marks MSM-1

Technical specification: The adhesive layer formation on silicone paper and multilayer polymeric film. Formation speed in the range of 1-6 m/min. Adhesive layer thichness in the range of 1-150 mm. Ability to cut out labels.

Usage area: Fabrication of optical document security intellectual property measures with micro-diffractive elements.

Keywords: Adhesive layer formation

Keywords: f

Tensiometer equipped with Vilhelmy plate and DoNuoring systems

Description: Tensiometer equipped with Vilhelmy plate and DoNuoring systems

Technical specification: Measurements range 1 - 999 mN/m

Usage area: Surface and interfase surface tension measurements

Keywords: Surface tension, interfase surface tension

Keywords: f

Atomic Absorption Spectrometer Perkin Elmer Model 403

Description: Atomic Absorption Spectrometer Perkin Elmer Model 403

Technical specification: double-beam spectrometer using the flame method. It can analyze about 30 heavy elements. The sensitivity of 0.05-0.1 ppm.

Usage area: used in many areas: water, soil and rock samples. Because of its simplicity, speed and accuracy of this method of analysis is one of the most commonly used in the determination of trace metals.

Keywords: concentration, quantitative analysis

Abrasion Resistance Tester IG/ABR/DIN (f. GIULIANI), Nr. 13916

Description: Abrasion Resistance Tester IG/ABR/DIN (f. GIULIANI), Nr. 13916

Technical specification: Diameter of wheel of 150 mm, rotating frequency of 40 mm-1, load weight of 10 N,

Usage area: Determination of abrasion resistance using a rotating wheel according to LST EN 12770; ISO 4649

Keywords: Abrasion resistance

Device of determination of paper (paperboard) surface smoothness

Description: Device of determination of paper (paperboard) surface smoothness

Technical specification: Dimensions of specimens 70x70, pressing 100 kPa ± 2 kPa; pressure above 50,7 kPa

Usage area: Determination of paper (paperboard) surface smoothness

Keywords: Surface smoothness

Electrodynamic Vibration Excitter systems

Description: Electrodynamic Vibration Excitter systems

Technical specification: Max acceleration - 92 m/s2; Max speed 1300 mm / s; Max displacement (double amplitude) -19000 μm ¶. Vibration frequency range 5-5000 Hz.

Usage area: Vibration excitation of the vibration and shock tests. Environmental testing in accordance with the standards LST EN 60068-2-6:2008 (sinusoidal vibration), LST EN 60068-2-64:2008 ( broadband random vibration ), LST EN 60068-2-27:2009 (Shock).

Keywords: Exciters, vibrations

Keywords: f

Kjeldahl distillation unit, "UKD 130"

Description: Kjeldahl distillation unit, "UKD 130"

Technical specification: Setting limits - up to 1 mg Kjeldahl nitrogen in the test sample. The best results are obtained when the sample is 10-15 mg of ammonium nitrogen.

Usage area: Determination of the nitrogen content in aqueous solutions based on Kjeldahl method.

Keywords: The nitrogen content.

Small tabletop muffle "Thermolyne 1400 Furnace"

Description: Small tabletop muffle "Thermolyne 1400 Furnace"

Technical specification: Operating temperature range - 0-1100 ° C. The interior of the high-temperature-resistant ceramics.

Usage area: Heating of the sample (0 – 1100 ºC).

Keywords: Heating of the sample.

Analytical electronic balance, "Ohaus Analytical Plus"

Description: Analytical electronic balance, "Ohaus Analytical Plus"

Technical specification: Maximum sample weight - 110 g. Scaling value - 0.1mg.

Usage area: Sample mass measurements (0 - 110g, d = 0.0001g).

Keywords: Analytical balance

Zeta Potential and Submicron Particle Size Analyzer Beckman Coulter DelsaNano C

Description: Zeta Potential and Submicron Particle Size Analyzer Beckman Coulter DelsaNano C

Technical specification: Concentration: 10 ppm - 40%; particle size: 0.6 nm - 7 µm, 0.6 nm - 30 µm (zeta potential); Zeta potential: -200 mV - 200 mV.

Usage area: Particle sizing, zeta potential

Keywords: Particle sizing, zeta potential

Centrifuge Hettich Universal 320 R

Description: Centrifuge Hettich Universal 320 R

Technical specification: Speed 0-9000 rpm, temp.range -20- 40 ºC.

Usage area: For phase separation by centrifugation

Keywords: Centrifugation, phase separation

ELPI ™ (Electrical Low Pressure Impactor). Enables measurement of real-time particle size distribution and concentration in the size range of 6nm - 10μm with 10Hz sampling rate

Description: ELPI ™ (Electrical Low Pressure Impactor). Enables measurement of real-time particle size distribution and concentration in the size range of 6nm - 10μm with 10Hz sampling rate

Technical specification: Particle size range - 0.006-10μm. Faction - 14. The sampling flow rate - 10 l/min.

Usage area: Real-time aerosol particle dispersion composition analysis, with the ability to collect particles of different fractions for further analysis (14 fractions, 0.006 - 10.0μm).

Keywords: Aerosol particles, dispersion composition.

Nanoscan SMPS nanoparticle sizer 3910. Nanoparticle number concentration meter

Description: Nanoscan SMPS nanoparticle sizer 3910. Nanoparticle number concentration meter

Technical specification: Operating modes: scanning - particle distribution across the measurement range (60 s); The desired particle size monitoring (1s). Measuring range - 10 to 420nm. Particle concentration - 100 to 1,000,000 particles/cm3.

Usage area: Aerosol nanoparticle dispersion composition in real-time (10-420 nm).

Keywords: Aerosol nanoparticles

PersonalDataRAM - pDR-1000AN. Measures concentrations of dust, smoke, mists and fumes in real-time

Description: PersonalDataRAM - pDR-1000AN. Measures concentrations of dust, smoke, mists and fumes in real-time

Technical specification: Aerosol concentration measurement range - 0.001 to 400.0mg/m3. Particle size range for maximum accuracy - 0.1 to 10μm.

Usage area: Measurements of personal exposure to aerosol particles in the workplace.

Keywords: Aerosol particles

HPLC equipment with automatic nitrogen determination by the Kjeldahl method and quantitative fat extraction solvent systems

Description: HPLC equipment with automatic nitrogen determination by the Kjeldahl method and quantitative fat extraction solvent systems

Technical specification: HPLC system with diode array and light scattering detector, binary gradient pump, autosampler, LCSolutions software. Mineralizator for sample preparation, automatic distillation unit with a neutralizing system and automatic titrator. SER148/3 Solvent Extractor operating temperature range 100-260 °C, the solvent recovery 50-70%, RSD <1%.

Usage area: For quantitative and qualitative analysis of basic food ingredients

Keywords: HPLC, LCD, DMD, fat extraction, Kjeldal method

impedance analyzer

Description: impedance analyzer

Technical specification: frequency 3 µHz-3 MHz. 2-3 elektrode system. Phase: 0,001 °. Sample diameter 16 mm. 2 measurement congurations: "in-plane"and "through-plane".

Usage area: investigations of electrical properties of dielectric films, testing of fuel cells

Keywords: investigations of electrical properties of dielectric films, testing of fuel cells

The portable measurement and data processing unit Pulse 3560

Description: The portable measurement and data processing unit Pulse 3560

Technical specification: Frequency range: 0 to 25.6 kHz; Input voltage: 7 ranges from 7,071 mVpeak to 7,071 Vpeak in 10 dB steps.

Usage area: Noise and vibration measurements and analysis; Sound intensity measurements.

Keywords: Measurements gauges, vibration, noise,

Sound pressure level meter Investigator 2260. The basic system.

Description: Sound pressure level meter Investigator 2260. The basic system.

Technical specification: Frequency range: 5 - 20kHz; Nominal sensitivity -26 dB ± 1.5 dB; Measurement range 24 ... 150 dB.

Usage area: Noise measurements and analysis; Sound intensity measurements

Keywords: Measurements, gauges, noise

The data collection and vibration measuring device VIBROTEST 60

Description: The data collection and vibration measuring device VIBROTEST 60

Technical specification: Frequency range: 1 - 20kHz; Speed ​​range 30 ... 600000 rpm; Speed ​​measurement accuracy 0,01 Hz (1 rpm); The measurement range of the transducer AS-065 1500m/s2 ; The measurement accuracy <2%.

Usage area: Vibration measurement and analysis, balancing, speed measurements.

Keywords: Vibration, balancing, analysis

Stand for Metal and semiconductor electrical conductivity testing

Description: Stand for Metal and semiconductor electrical conductivity testing.

Technical specification: 4 probe device, silicon, germanium, gallium arsenide samples.

Usage area: Used for the course "Materials Science and Engineering Laboratory works.

Keywords: Probe, silicon, germanium

Stand of liquid and solid fuel ash analysis. Analysis is performed acording EU standard

Description: Stand of liquid and solid fuel ash analysis. Analysis is performed acording EU standard

Technical specification: Burning temperature up to 1100 C, capacity of the chamber 160x250x100 mm

Usage area: The analysis of the ash content in hard fuel

Keywords: Fuel , biofuel, determination of ash content

Stand of oil compostion analysis (for study process)

Description: Stand of oil compostion analysis (for study process)

Usage area: Stand sold for Chem tech. dept.

Keywords: f

Wearable device for monitoring human physical activity parameters MinimaxX (model v2.OPCB)

Description: Wearable device for monitoring human physical activity parameters MinimaxX (model v2.OPCB)

Technical specification: Wearable elite sports computer for monitoring human physical activity parameters. 3 axis 100 Hz accelerometers (linear motion, impact forces, jump height, airtime, acceleration, deceleration and more); 3 axis 100 Hz gyroscopes (angular motion, rotation); 3 axis 30 Hz Magnetometers (direction, orientation); GPS 1-5 Hz; Heart rate sensor for Polar type HR monitors; Size 50x18x88 mm 5 hours battery life; waterproof to 1 m; mass 67 g; wireless communication with PC (Logan Plus Analysis Software for measurements and data processing, hundreds of metres range) for up to 100 units technology

Usage area: Monitoring human physical activity parameters (single person or team up to 100 athletes). Displays (transmits to PC) athlete`s position, instantaneous speed and direction, impact loading, heart rate, efforts at different speed bands, provides the magnitude of impact force, the direction of impact, whether the athlete was brought to the ground, measures start reaction time, technique deterioration and stride or stroke rate

Keywords: Physical activity, monitoring

The shock device

Description: The shock device

Technical specification: Pulse parameter: (Load 5 kg) Pulse duration 1,5 ....20ms; Pulse amplitude 100 m/s2...4000*m/s2; (Load 50 kg) Pulse duration 2 ....18 ms; Pulse amplitude 100m/s2…1600*m/s2; (Load 100 kg) Pulse duration 2 ....15 ms; Pulse amplitude 100m/s2…500*m/s2.

Usage area: Environmental impact test in accordance with LST EN 60068-2-27: 2009 (Shock)

Keywords: Shock , tests

Spectrum analyzer (150 kHz - 3 GHz)

Description: A spectrum analyzer (150 kHz - 3 GHz ) measures the magnitude of an input signal versus frequency within the full frequency range of the instrument. The primary use is to measure the power of the spectrum of known and unknown signals.

Technical specification: 150kHz-3GHz

Usage area: spectrum analysis

Keywords: spectrum, 3 GHz

IL 1700 Research Radiometer

Description: IL 1700 Research Radiometer

Technical specification: W/cm2, lix,cd/m2

Usage area: Luminance measurement

Keywords: Radiometer

Generator output block

Description: Generator output block

Technical specification: 330 MHz

Usage area: For measurement

Keywords: Generator

Generator output block

Description: Generator output block

Technical specification: 165/330 MHz

Usage area: For measurement

Keywords: Generator

Device for roughness measurement of mechanical surfaces

Description: Device for roughness measurement of mechanical surfaces

Technical specification: Measurement accuracy: 1.Ra: 0.03μm~6.3μm/1μ~250μ. 2.Rz: 0.2μm~50.0μm/8μ~999μ. 3.Ry/R max: 0.2μm~25μm/8μ~999μ. •Resolution: 0.01μm/1μ. •Measurement range 0.8mm/0.30”; ANSI 2RC Filter

Usage area: Surface roughness measurements

Keywords: Surface roughness measurements

Langmuir-Blodgett trough and control system

Description: Langmuir-Blodgett trough and control system

Technical specification: Surface area – 400 cm2 Working area – 318 cm2 Volume – 1000-1050 cm3 Surface pressure sensor – Wilhelmi plate (error 0,1 mN/m)

Usage area: Langmuir-Blodgett trough is used to deposit single or multiple monolayers on a solid substrate.

Keywords: Langmuir-Blodgett trough, thin layers

Electric power quality analyser M12192

Description: Electric power quality analyser M12192

Technical specification: Quality standard LST 50160

Usage area: Electric power quality measurement

Keywords: Electric power quality

FT-IR spectrometry system

Description: FT-IR spectrometry system

Technical specification: System consists of Vertex70 spectrometer (Bruker), UV light source Omnicure S2000, Golden Gate Mk II ATR Accessory with Heated Diamond Top-plate, horizontal QuickLock transmittance accessory, standard spectral range covers 8,000 to 350cm-1, DTGS and MCT liquid nitrogen cooled detectors, rapid scan option for more than 68 spectra/sec at a spectral resolution of 16cm-1. Peaction monitoring option.

Usage area: Investigation of photopolymerisation and thermalpolymerisation, investigation of photodegradation processes in organic materials, investigation of organic materials during apllication of heat.

Keywords: Infrared absorbtion spectra, photopolymerisation, thermal polymerisation, photostability

Biogas flow meter

Description: Meter for low flow measurement using laminar flow elements. Meter is used with the differential pressure transducer, valve block and universal indicator.

Technical specification: up to 0.025 m³ / h at a pressure difference 1kPa

Usage area: Biogas flow measurement

Keywords: Biogas, flow

Stand for metal and semiconductor electrical conductivity testing

Description: Stand for metal and semiconductor electrical conductivity testing.

Technical specification: Miliohmeter, temperature chamber, metal and semiconductor samples.

Usage area: Used for the course "Materials Science and Engineering Laboratory works.

Keywords: resistance, temperature chamber, metal, semiconductor

RF signal generator

Description: RF signal generator

Technical specification: 9kHz-3,2GHz, 23dBm

Usage area: Generating of radio frequency signals

Keywords: Generator, radio frequency

DC 4-quadrant drive stand

Description: Stand for access to Phase reverse gear controlled rectifier - DC motor (VL - V) diagram and its work. Tested the iron work with an active load, then to the engine when the engine offense and load. The actuator is tested it with the engine and regenerative braking mode, when there is a separate and total iron work groups.

Technical specification: 205V, 5A, 0.3KW, 2000rpm

Usage area: DC 4-quadrant drive stand

Keywords: DC, current, drive, quadrant

DSP evaluation kit

Description: DSP evaluation kit

Technical specification: With BF548 DSP

Usage area: For evaluation needs

Keywords: DSP

Universal surface analysis system for X-Ray photoelectron spectroscopy, ion scatering spectroscopy, reflection electron energy loss spectroscopy, and angle Resolved XPS (ARXPS)

Description: Universal surface analysis system for X-Ray photoelectron spectroscopy, ion scatering spectroscopy, reflection electron energy loss spectroscopy, and angle Resolved XPS (ARXPS)

Technical specification: Monochromatised X-Ray sorce (Al anaode). Elements detection limits from 0.1% to 5%. Lens-defined area lateral resolution from 20 µm to 900 µm. High-resolution parallel imaging spectra from areas down to ~ 5 µm. Elements detection limits from 0.1% to 5%. Sample heating up to 1000 K, sample cooling down to 77 K; vacuum better then 5*10-10 mB.

Usage area: Quantitative and qualitative surface analysis using X-Ray photoelectron spectroscopy, ion scattering spectroscopy, reflection electron energy loss spectroscopy, angle Resolved XPS (ARXPS) with Ar ion surface eching/cleaning possibility

Keywords: X-Ray photoelectron spectroscopy, ion scatering spectroscopy, electron spectroscopy, reflection electron energy loss spectroscopy, Angle Resolved XPS (ARXPS)

Portable mobile system Noraxon for measurement of biomechanical parameters. Amplifier with Bluetooth interface with PC where software for data acquisition and processing is installed and a set of transducers

Description: Portable mobile system Noraxon for measurement of biomechanical parameters. Amplifier with Bluetooth interface with PC where software for data acquisition and processing is installed and a set of transducers

Technical specification: 4 channels amplifier Myo Trace 400 with Bluetooth interface with PC; measurements and data processing software MyoResearch XP Clinical; transducers: self-adhesive EMG (muscles electrical activity), goniometers (mechanical 1-D (±160o) and electrical 2-D (±160o), 1-D accelerometer (2g), inclinometer, spot force sensors (5 and 110 N), hand dynamometer (< 600 N).

Usage area: Measurements of human biomechanical parameters during research of steady state or different physical activities (gait analysis, work, sports or casual activities etc.)

Keywords: Biomechanics, amplifier, sensor, EMG, goniometer, accelerometer, inclinometer, dynamometer

KCBH, P2-83 VSWR measurement

Description: KCHB,P2-83 VSWR measurement

Technical specification: VSWR 0,1-18GHz

Usage area: VSWR measurement

Keywords: VSWR measurement

Induction motor test stand

Description: Stand enables experimentally get short cage rotor induction motor mechanical and energy characteristics in different operating modes. Tests carried out by combining the stator windings star and triangle. Mechanically loaded engine braking device equipped with frequency converter. Parameters measured with a digital measuring device.

Technical specification: 400/692V, 1/0.8 A, 0.37kW, 1400rpm

Usage area: Induction motor test stand

Keywords: Asynchronous, motor

Electric power quality analyser M12192

Description: Electric power quality analyser M12192

Technical specification: Quality standard LST 50160

Usage area: Electric power quality measurement

Keywords: Electric power quality

Radio frequency power meter

Description: Radio frequency power meter

Technical specification: 10MHz-20GHz

Usage area: Measuring of microwave power

Keywords: Power meter, microwaves

Electromagnetic field intensity meter

Description: Electromagnetic field intensity meter

Technical specification: 200kHz-2,5GHz

Usage area: Measuring intensity of EM field

Keywords: Field meter, radio waves

Ultrasound scanner together with set of transducers for the noninvasive imaging of human internal tissues

Description: Ultrasound scanner together with set of transducers for the noninvasive imaging of human internal tissues

Technical specification: 3,5 MHz convex and 5 MHz linear transducers, dynamic focusing, B and M working modes, scan depth up to 220 mm.

Usage area: Imaging of human internal tissues (abdomen, obstetrics, gynecology, cardiology, urology, pediatrics)

Keywords: ultrasound, scanner, imaging

Physiological parameters monitoring system

Description: Physiological parameters monitoring system

Technical specification: ECG, pulse

Usage area: ECG, pulse

Keywords: ECG, pulse

Media Gateway Mediant 2000/1 Span

Description: Media Gateway

Technical specification: 1xE1, H.323, SIP, VoIP (30 channel), 2x10/100 Base-T

Usage area: VoIP network, signaling gateway

Keywords: Media Gateway, VoIP, H.323

Asynchronous drive with frequency converter stand

Description: Stand for access to the frequency converter operating principle, design and management capabilities. Determine the size of the added voltage stator resistance compensation, motor voltage versus frequency, no-load speed and gliding. Obtained drive mechanical characteristics at different frequencies.

Technical specification: 230/400V, 1.47/0.85A, 0.3kW, 1410rpm

Usage area: Asynchronous drive with frequency converter stand

Keywords: Frequency response, asynchronous, drive

Tester for 50b/s to 2.048Mb/s digital circuits

Description: Tester for 50b/s to 2.048Mb/s digital circuits (E1 G.703, G.704).

Technical specification: E1, G.703, G.704, ITU-T G.821/826, BER, ES, SES

Usage area: E1 testing for mobile and PDH/SDH networks

Keywords: E1, G.703, G.704, ITU-T G.821/826, BER, ES, SES, PDH, SDH, Mobile networks

DC motor stand

Description: Stand allows you to receive a DC electric actuators and mechanical characteristics of the various operating modes. Examine the foreign excited motor control performance resulting from the mechanical characteristics of the engine exhaust and dynamic braking. Tested the motor speed control by changing the flow of excitation. Derived by combining the mechanical characteristics of the engine as a coherent excitation machine and as a mixed excitation machine.

Technical specification: 205V, 5A, 0.3KW, 2000rpm

Usage area: DC motor stand

Keywords: DC, motor

Flexible manufacturing modeling stand

Description: Flexible manufacturing simulation stand with Festo programmables controls. Programmable controllers managed system includes data processing and analysis of the transport conveyor, shafts and wheels assembly stations, CNC milling machines, CNC lathes, imaging camera. The entire control system over the network software is managed from the control panel.

Technical specification: Festo PLC

Usage area: Flexible manufacturing modeling stand

Keywords: Flexible, manufacturing

Room automation system Instabus EIB

Description: The system is designed to simulate and investigate the regulation of lighting, blinds, heating system regulation. Equipment allows to carry out meteorological data tracking.

Technical specification: Temperature, humidity, wind speed, light metering

Usage area: Room automation

Keywords: Room automation, control

Overvoltages simulator

Description: Overvoltages simulator

Technical specification: 200 kV; 120 kV; 6,3 kV voltage; 500 kV in impulse

Usage area: Experimental investigation and moduling in overvoltages

Keywords: Overvoltages

Manual soldering eqiment for assembly and repair

Description: Manual soldering eqiment for assembly and repair

Technical specification: Programmable temperature 90-450C, hot ait flow 300m/s

Usage area: PCB soldering and repair

Keywords: Soldering station, desoldering station, preheting plate

Gripper

Description: Chuck a size of 65 x 90 x 10 mm, max. Load of 50g. 2 WAR motors with encoder designed robotic arm or manipulator. Its purpose is to perform gripping - lifting - laying functions.

Technical specification: Size 65 x 90 x 10 mm; Load Approx 50 g; 2 DC motors with absolute angle encoder

Usage area: Object manipulation

Keywords: Gripper

PC processor designed to work with Linux. 266MKz Pentium CPU, 64MB of RAM, video.

Description: PC processor designed to work with Linux. 266MKz Pentium CPU, 64MB of RAM, video.

Technical specification: 90 × 96 mm

Usage area: PC/104 is intended for specialized embedded computing environments

Keywords: Embedded computing

K2D image processing board for video signal from the Autonomy robot conversion to a digital signal

Description: K2D image processing board for video signal from the Autonomy robot conversion to a digital signal. The module for video making and autonomous robot navigation.

Technical specification: A full 360 degree field of view

Usage area: Robot vision control

Keywords: Video camera, Omni directional vision

Technological process modeling system

Description: Technological process modeling. Pneumatic valve control using the AS-i and PROFIBUS communication via Siemens SIMATIC S300 programmable logic controller.

Technical specification: AS-i, Profibus, pneumatics

Usage area: Process control

Keywords: Pneumatic valve, AS-i, PROFIBUS

Standard BOSCH sensor set

Description: Standard BOSCH sensor set

Technical specification: 10-30 V DC, max. 500 mA, 2-8, mm

Usage area: Object detection in various situations by using optic, magnetic, capacitive, inductive, ultrasonic sensors

Keywords: Optic, magnetic, capacitive, inductive, ultrasonic sensors

SDH Add/Drop Multiplexer

Description: SDH Add/Drop Multiplexer

Technical specification: STM-1 standard 155Mb/s, 8 Ethernet ports, 8 E1 ports

Usage area: Data communications

Keywords: SDH, Ethernet, E1

Osciloscope

Description: Osciloscope

Technical specification: 1GHz,2/4 GSa/s

Usage area: For measurement

Keywords: Osciloscope

Sensor Training stand TP-4000-Bs

Description: Sensor Training stand for analog and discrete signal processing using a linear, angle turn, optical, proximity sensors. Investigated the strain gage force and torque sensor, set the nonlinearities. RTD tested position sensors. Tested optical position sensor and sets its properties.

Technical specification: Transducers and sensors

Usage area: sensor research

Keywords: sensor

Training stand for engine rotation speed control

Description: Training stand for engine rotation speed control system for examination using a Siemens SIMATIC S300 programmable logic controller. The study bench adjustable speed drives with frequency converter and asynchronous motor. Tested air speed devices.

Technical specification: 0 -380 ... 480 V, 0-600 Hz, 6,1 A

Usage area: Rotation speed control

Keywords: Drive, speed, control

Programmable logic controller processor module 024 QUANTUM UNITY / 7168K

Description: Programmable logic controller processor module 024 QUANTUM UNITY / 7168K. Widget for processes, signal processing equipment and programming management. The processor supports Modbus RS232 / RS485, Modbus Plus, Ethernet TCP / IP and USB.

Technical specification: Modbus RS232/RS485, Modbus Plus, Ethernet TCP/IP, USB

Usage area: Processes, equipment management software

Keywords: Processor, QUANTUM

Laboratory electrical motors stand

Description: Laboratory electrical motors stand

Technical specification: Supply voltage - 230 kV; RPM - 1550; 2,2 kW

Usage area: For understanding about electrical motors principles

Keywords: electrical motors

Thermovision camera

Description: Thermovision camera

Technical specification: 20-100C 128x128pix

Usage area: PCB thermal image, fault diagnostics

Keywords: Thermovision camera

Stand for access to the industrial drive Siemens Micromaster 420

Description: Stand for access to the industrial drive Siemens Micromaster 420. Examined the drive structure, functional diagram, starting and stopping methods settings and change. An optimal motor feeding voltage versus frequency. Tested slip compensation.

Technical specification: Micromaster 420, 0.37kW, 2.3A

Usage area: Asynchronous gear stand

Keywords: Frequency response, asynchronous, drive

Spectrum analyser

Description: Spectrum analyser

Technical specification: 9kHz iki 1,3 GHz

Usage area: spectrum analysis

Keywords: spectrum

Training bench is a positioning system with three-phase asynchronous motor and valve motor

Description: Training bench is a positioning system with three-phase asynchronous motor and valve motor. Engines powered by the company SEW frequency inverters. Each engine has a position sensor (encoder). Control Algoritam based upon the hierarchical management. One drive is master, the other slave to get the synchronous movement.

Technical specification: SEW Eurodrive MD_60A, 1.5kW, 4A

Usage area: Feedback for the inverter with three-phase asynchronous motors with encoder stand. Control algoritamas frequency regulator

Keywords: Asynchronous, valve, motor, three-phase, encoder, frequency, the controller

Servo drive with MD1AE965MR motor stand

Description: Stand for actuators investigation and coordination parameters. The actuator used Brushless AC motor and frequency converter. The control system consists of hierarchical management approach. Actuator adjustment is carried out using the software package WMEMOC. Explored the controller parameters on pereinamiesims processes

Technical specification: BSH0551T11F1A, 0.5Nm, 8000rpm, 0.4kW

Usage area: Servo drive with MD1AE965MR motor stand

Keywords: Servo actuator, MD1AE965MR, motor

AC drive MD1AA750A6 stand

Description: The study bench adjustable speed drives with frequency converter Altivar 61 and asynchronous motor applies to air traffic control. Tested air speed devices. The air stream is adjusted by changing the engine speed or the air passage deflector. Examine when the control method is more economical.

Technical specification: Altivar61 0.75kW, 1.2 HP, 0...380V, 2.0A

Usage area: AC drive MD1AA750A6 stand

Keywords: AC, current, drive, MD1AA750A6

Mixed Signal Oscilloscope DLM2054 4ch, 500MHz

Description: Mixed Signal Oscilloscope DLM2054 4ch, 500MHz

Technical specification: Mixed Signal Oscilloscope DLM2054 4ch, 500MHz

Usage area: Mixed Signal Oscilloscope

Keywords: Mixed Signal Oscilloscope

Five degrees of freedom manipulator

Description: Five degrees of freedom manipulator controlled low-power servo motor 20x30 mm with jaw. Designed for students training

Technical specification: Max load - 50g, mad distance 30cm

Usage area: Manipulator control

Keywords: manipulator, gripper

MCU FW development system

Description: MCU FW development system

Technical specification: STM32

Usage area: MCU FW development system

Keywords: MCU IDE

Biomedical signal acquisition and analysis system BIOPAC BSLBME-W including 4 channel universal programable biosignal amplifiers, biomedical sensors and software.

Description: Biomedical signal acquisition and analysis system BIOPAC BSLBME-W including 4 channel universal programable biosignal amplifiers, biomedical sensors and software.

Technical specification: 4 izolated channels, discretization frequency up to 100 k/s, 24 bits, amplification 5-50 000, diferencial input impedance not less than 2 MΩ, analog output 16 bits, 8 digital input/output channels. USB 2.0 interface. Software for full control of system. Biomedical sensors: dynamometer; blood pressure sensor; electronic stethoscope sensor; air flow sensor; air volume calibration tool; hand switch; earphones; photoplethysmographic pulse sensor; breadboard for prototyping; bioimpedans sensor; muscle stimulator; fast response temperature sensor; respiration sensor.

Usage area: Biomedical signal acquisition and analysis

Keywords: biomedical signals, programable amplifier, biomedical sensor

Satellite with equipment for signals reception and amplifying

Description: Satellite of 5 m. diameter with equipment for signals reception and amplifying

Technical specification: Receiving at 10,95-11,7 GHz and 12,2-12,75 GHz, modulation FDM/FM/FDMA and CFDM/FM/FDMA,

Usage area: Reception of radio signals

Keywords: Satellite, signal reception, radio equipment

Arbitrary waveform generator Rigol DG5251

Description: Arbitrary waveform generator Rigol DG5251

Technical specification: 250 MHz bandwidth, 1 GSa/Sec waveform output 14 bit vertical resolution, 128 Million Points of Arbitrary Waveform MemoryBuilt in standard modulations including IQ modulation for digital baseband generation including QPSK and QAM formats, Standard Interfaces including LXI-C (Ethernet), USB device and host, and GPIB,Options including output amplifier (PA-1011) and frequency hopping capability

Usage area: Arbitrary waveform generator

Keywords: Arbitrary waveform generator

Arbitrary waveform generator Rigol DG5251

Description: Arbitrary waveform generator Rigol DG5251

Technical specification: 250 MHz bandwidth, 1 GSa/Sec waveform output 14 bit vertical resolution, 128 Million Points of Arbitrary Waveform MemoryBuilt in standard modulations including IQ modulation for digital baseband generation including QPSK and QAM formats, Standard Interfaces including LXI-C (Ethernet), USB device and host, and GPIB,Options including output amplifier (PA-1011) and frequency hopping capability

Usage area: Arbitrary waveform generator

Keywords: Arbitrary waveform generator

Mixed Domain Oscilloscope

Description: Mixed Domain Oscilloscope

Technical specification: Four channel, analog channel bandwidth upto 1GHz, Sample rate (1ch and 2ch) 5GS/s, 4ch - 2.5GS/s. Record length (1ch, 2ch, 4ch) - 20M, 16 digital channels and one RF channel.

Usage area: Signal anlysis in time and frequency domain.

Keywords: Oscilloscope, signal analysis.

Video recorder HD SONY PMW-EX3

Description: Video recorder

Technical specification: SD and HD resolution

Usage area: A/V recording

Keywords: Creation of A/V content

Cable and antena analyser

Description: Cable and antena analyser

Technical specification: 100 kHz - 3 GHz

Usage area: Cable and antena analysis

Keywords: Cable and antena analysis

Transcoder

Description: Transcoder

Technical specification: IP/SDI transcoder

Usage area: Digital TV

Keywords: A/V content distribution

Digital Oscilloscope RIGOL DS1302CA

Description: 300 MHz Digital Oscilloscope

Technical specification: 300 MHz bandwidth, 2 analog channels, vertical sensitivity 1 mV/div ~ 10V/div, real-time sample rate 2 GSa/s(each channel),1 GSa/s(dual channels).

Usage area: Signals observing

Keywords: osciloscope, signals

Syringe infusion pump docking station

Description: Syringe infusion pump docking station "Infusion station IDS", 2 pcs. "Aiteks 2016 Universal" infusion pump

Technical specification: Power supply 100..230V, giving medicines rate 0.01 ml / hr to 1000 ml / h, the information monitored in LAN

Usage area: The device used in medicine

Keywords: Syringe infusion pump, docking station

SDH Add/Drop Multiplexer

Description: SDH Add/Drop Multiplexer

Technical specification: STM-1 standard 155Mb/s, 8 Ethernet ports, 8 E1 ports

Usage area: data communications

Keywords: SDH, Ethernet, E1

SDH Add/Drop Multiplexer

Description: SDH Add/Drop Multiplexer

Technical specification: STM-1 standard 155Mb/s, 8 Ethernet ports, 8 E1 ports

Usage area: data communications

Keywords: SDH, Ethernet, E1

DSP evaluation kit

Description: DSP evaluation kit

Technical specification: With BF548 DSP

Usage area: For evaluation needs

Keywords: DSP, embedded system

Spectrum analyzer (150 kHz - 3 GHz)

Description: A spectrum analyzer (150 kHz - 3 GHz ) measures the magnitude of an input signal versus frequency within the full frequency range of the instrument. The primary use is to measure the power of the spectrum of known and unknown signals.

Technical specification: 150 kHz-3 Ghz

Usage area: spectrum analysis

Keywords: spectrum, 3 GHz

DSP evaluation kit

Description: DSP evaluation kit

Technical specification: With BF548 DSP

Usage area: For evaluation needs

Keywords: DSP, embedded system

Physiological parameters monitoring system

Description: Physiological parameters monitoring system

Technical specification: ECG, pulse

Usage area: ECG, pulse

Keywords: ECG, pulse

DSP evaluation kit

Description: DSP evaluation kit

Technical specification: With BF548 DSP

Usage area: For evaluation needs

Keywords: DSP, embedded system

Device for multiplication of holograms

Description: Device for multiplication of holograms

Technical specification: Multiplication of optical security marks on silicone paper and multilayer polymeric film. Formation temperature in the range of 70-180 ºC. The width of the tape 106 mm. The length of the tape 1000 m.

Usage area: Fabrication of optical document security intellectual property measures with micro-diffractive elements.

Keywords: Document security

Additional devices for RF experimental and modelling applications

Description: Additional devices for RF experimental and modelling applications

Technical specification: Connectors, cables, detectors and adapters for N, BNC, SMA standards

Usage area: Measurements of parameters of RF devices and antennas

Keywords: Connectors, adapters, cables

Process control stand

Description: Process parameters (level, flow) measurement and control using Siemens SIMATIC S300 programmable logic controller. Stand for student training and practical research. (Studentų st. 50-164)

Technical specification: Level mm , flow l / h

Usage area: Process control

Keywords: Level, flow

Hydrothermal processing of materials under high pressure system

Description: Hydrothermal processing of materials under high pressure system

Technical specification: Multiple controlled system by PC which consists of stirred and non-stirred autoclaves. Flexible process control unit to handle up to six individual autoclaves with PID temperature control and data logging for all relevant process data (pressure, temperature, time, rate of rotation and etc.). Exchangeable cylinders of pressure vessels in stirred and non-stirred autoclaves with different volumes. No welded parts (valves, adapters, cylinder and etc.) in the autoclaves, all parts screwed in, removable and exchangeable.

Usage area: Hydrothermal synthesis

Keywords: Stirred and non-stirred autoclaves

Thermogravimetric Analyzer Linseis STA PT1600 coupled with mass spectrometer GSD320 Linseis/Pheiffer Vacuum

Description: Thermogravimetric Analyzer Linseis STA PT1600 coupled with mass spectrometer GSD320 Linseis/Pheiffer Vacuum

Technical specification: STA PT1600 specifications: temperature interval - -40 - 1500 °C; accuracy - ± 1 %; max. sample weight up to 5 g. Quadrupole mass spectrometer intervals - 1-100 amu; 1-200 amu; 1-300 amu.The synhronization of experiment beginning by STA-MS as well as the corelation during the whole experiment is guaranteed and controlled.

Usage area: The evaluation of physical and chemical properties of the sample (mass changes, decomposition, crystallization or melting temperature, specific heat and other thermal conversions) while the substance is subjected to a controlled temperature program in a specified atmosphere; the evaluation of evaporated gas from a sample.

Keywords: Simultaneous thermal analysis, evaporated gas analysis

Beer making (brewing) unit

Description: Beer making (brewing) unit

Technical specification: Two-vessel brewhouse with whirlpool; Two cylindroconical fermenting tanks and one open fermenter; It is possible to produce very small quantity of beverage (only 30 liters, in some cases even less). Laboratory equipment allows you to work using methods similar to specific large industry methods. Technological processes are automated, easily operated and programmed.

Usage area: For studies, research work in the field of brewing technology (fermentation), for technological investigations or development of new fermentable beverages.

Keywords: Beer making technology

Equipment for composition and emulsions formation

Description: Equipment for composition and emulsions formation

Technical specification: Kilia vacuum bowl cutter 30L VK 4000 express. Advantage of the deep bowl form is the low minimum capacity of 20 %, which is important for recipes with a small production volume The maximum batch size depends on each product, but should usually not be over 80%. Knife shaft drive frequency converter controlled (AC-drive) with 6 fixed programmed speeds, 4 forward (50, 100, 2500, 5000 rpm), 2 reverse (50, 100 rpm). Variable bowl drive (7-20 rpm). Homogenizer-coloidal mill SG-1325-2B. Capacity 100 kg/h, 15 l. Meat mixer Fama Fic 30M. Capacity 30 kg. 47 rpm.

Usage area: Meat and fish technology

Keywords: Meat and fish technology

cooling stand TE6/EV and TE6A/EV

Description: cooling stand TE6/EV and TE6A/EV

Technical specification: Cooling water 0-100 l/h, heat element 60 W

Usage area: heat transfer service unit, linear heat conduction

Keywords: cooling

Pressure losses pilot plant DPA/EV

Description: Pressure losses pilot plant DPA/EV

Technical specification: Centriugal pump 0-10 m3/h. Manometer sygnal 4-20 mA

Usage area: Investigation of different fluid flow hydrodynamic structure

Keywords: fluid hydrodynamics

Mettler Toledo T70 potentiometer.

Description: Mettler Toledo T70 potentiometer.

Technical specification: pH measurement (0-14) selective measurement of ions Cu2 ; Cd2 ; Ca2 ; F-; Cl-

Usage area: titration,measurement of different ions concetration

Keywords: titration,measurement of ions concetration

"Dekati ®"double diluter setup for combustion measurements

Description: "Dekati ®"double diluter setup for combustion measurements

Technical specification: The dilution ratio - 1:49. Dilution air pressure - 2 bar. Operating temperature - 0-450 º C.

Usage area: The dilution device for sampling from concentrated sources.

Keywords: Diluter

HPLC system with UV/VIS and DAD

Description: HPLC system with UV/VIS and DAD

Technical specification: Mamual injection, RIT detector, 5 independent channels with up to four solvents in a single run, the gradient can be made under high and low pressure.

Usage area: Chromatographic analysis

Keywords: Chromatography

Liophylisator SPI Industries Sentry 2.0

Description: Liophylisator SPI Industries Sentry 2.0

Technical specification: Temp.range -50 - 10 ºC, vacuum range: 20-2000 mTorr.

Usage area: Freez-drying of materials

Keywords: Freez-drying

Thermogravimeter

Description: Thermogravimeter

Technical specification: TA Instruments Q50. Max sample weight 1g, Temperature range - ambient to 1000oC, heating rate 0.1- 100oC/min

Usage area: Investigation of thermostability of organic materials

Keywords: Thermogravimetry

HPLC system

Description: HPLC system

Technical specification: Automatic injection, diode fluorescecnce detector, 2 independent channels with up to four solvents in a single run, column temperature control up to 40°C.

Usage area: Chromatographic analysis

Keywords: Chromatography

DRON-6 powder X-ray diffractometer

Description: DRON-6 powder X-ray diffractometer

Technical specification: powderX-ray diffractometer with Bragg-Brentano geometry using Ni-filtered CuKα radiation, operating at a voltage of 30 kV and an emission current of 24 mA. The step-scan covered the angular range 5–60 (2θ) in steps of 2θ = 0.02.

Usage area: powder X-ray analysis

Keywords: X-ray analysis

Microwave reactor Anton Paar GmbH - Monowave 300

Description: Microwave reactor Anton Paar GmbH - Monowave 300

Technical specification: 850W. Max. Temp. 300°C, operating pressure 30 bar, max. pressure 200 bar. max. mixing speed 1200 rpm. Three SiC vessels, filling volume from 0.5 to 20 ml.

Usage area: Microvawe synthesis

Keywords: Microvawe synthesis

Thermomechanical analyzator and dielectric spectrometer

Description: Thermomechanical analyzator and dielectric spectrometer

Technical specification: MCR302 rheometer (Anton Paar). Heating range of convection oven is from -150 to 450oC. Plate-Plate geometries of 8 and 15mm available. Universal Extensional Fixture for soft films tension experiments. Dielectro-reological device, UV curing system.

Usage area: Rheological tests in rotational and oscillatory modes are possible. DMTA analysis of soft films, fibers, polymer melts. UV curing experiments. Detection of phase transitions by dielectric spectroscopy.

Keywords: dynamic mechanical thermal analysis, dielctric spectroscopy, UV curing

Air handling unit with direct-driven supply air and extract air fans.

Description:

Air handling unit with direct-driven supply air and extract air fans.

Technical specification:

Air handling unit with direct-driven supply air and extract air fans.

Usage area: Air handling unit with direct-driven supply air and extract air fans.

Keywords: Pressure, temperature

Electroacustic spectrometer DT-300

Description: Electroacustic spectrometer DT-300

Technical specification: Sample volume 2-100 ml, concentration 0.1-50%; particle size <100 micrometers

Usage area: For determination of zeta potential of particles in dispersions

Keywords: Zeta potential, electroacustic method

Differential scanning calorimeter Perkin Elmer DSC8500

Description: Differential scanning calorimeter Perkin Elmer DSC8500

Technical specification: Temp.range -100 - +750 ºC, heating rate 0.1-750 ºC/min.

Usage area: For DSC measurements, for investigations of materials phase and physical transitions

Keywords: Differential scanning calorimetry

Gelchromatografas Malvern Viscotek 270 Dual Detector

Description: Gelchromatografas Malvern Viscotek 270 Dual Detector

Technical specification: Refractive index and light scattering detectors, solvent DMSO, molecular weight range: 10000-4000000.

Usage area: For determination of molecular weight and polidispersity of biopolymers

Keywords: Gelchromatography, molecular weight

Twin screw extruder KrausMaffei Berstorf GmbH ZE25Rx40D-UTXmi

Description: Twin screw extruder KrausMaffei Berstorf GmbH ZE25Rx40D-UTXmi

Technical specification: Motor power: 26 kW; Throughput rate: 10kg/h; Speed screw (max): 1200 rpm; Number og heatable barrel housing: 7.

Usage area: Reactive extrusion of biopolymers

Keywords: Reactive extrusion

Polymer characterization system - molecular sieve chromatograh

Description: Polymer characterization system - molecular sieve chromatograh

Technical specification: Elution - 0,05-2 ml/min, molecular mass interval - 100-4×106 D, detection ( UV detector 200-400 nm, RI detector,low and high angle light scattering detector), eluent degassing system, UV spectra registration

Usage area: determination of polymers molecular masses (Mn, Mw, Mz and polidispersity

Keywords: Molecular sieve chromatograhy, MSC, gel permeation chromatography, GPC, molecular mass

System SPECTRUM GX 2000 RAMAN Nr.68891, HATR ACCESSORY FOR SPECTRUM GX

Description: System SPECTRUM GX 2000 RAMAN Nr.68891, HATR ACCESSORY FOR SPECTRUM GX

Technical specification: Diapazone of FTIR spectrum 10 000-200 cm-1, HATR FTIR spectrum diapazone 4000-460 cm-1 ribose

Usage area: FTIR analysis of anorganic, organic ang polymer materials

Keywords: FTIR, HATR

Meat and fish thermal processing and cooling equipment

Description: Meat and fish thermal processing and cooling equipment

Technical specification: Universal Cooking and Smoking Installations BASTRAMAT, with Cooking, Roasting, Cooling, Drying, Climate maturing. Wood-chip smoke generation. Temperature range adjustable between +10° C and +100° C. Freezer Foinox BC 50 - 2A . All solid stainless steel construction . Operating temperature -+70° -18°, Pan capacity 5xGN1/1 - 5x(600x400). Output at +70°C +3°C-10,5 Kg. Output at +70°C -18°C-4,8Kg. Dimensions -750x700x850mmh

Usage area: Meat and fish thermal processing and cooling

Keywords: Meat and fish technology

Thermal eveporation system integrated into the glove-box

Description: Thermal eveporation system integrated into the glove-box

Technical specification: Mbraun glove-box, gas purification system, gas purification system for closed cycle cirulation, Rotary vane pump and turmolecular pumps, Sensor-Set: H2O-analyzer and O2-analyzer, 2 x thermal evaporators for metals, 2 x evaporators for organics (temperature range: 50°C up to 600°C, typical deposition rates: (10-3)… 5 nm/sec)

Usage area: Organic electronics device formation

Keywords: Thermal evaporation, organic semiconductor, OLED, organic electronics

Keywords: f

Diferential scanning calorimeter

Description: Diferential scanning calorimeter

Technical specification: TA Instruments Q2000, temp range -90oC to 550oC, sensitivity 0.2mW, modulated DSC mode, direct Cp measurement, PhotoDSC option

Usage area: Investigation of phase transitions of organic materials, investigation of kinetics of chemical reactions, investigation of photopolymerisation

Keywords: diferential scanning calorimetry

Hardness tester

Description: Hardness tester

Technical specification: Vickers, Rockwell, Brinell

Usage area: hardness measurement

Keywords: hardness measurement

Stand of solid fuel properties testing. Test are performed acording EU standard

Description: Stand of solid fuel properties testing. Test are performed acording EU standard

Technical specification: Calorific value of fuel. Samples of up to 1,5-2 g., accuracy of weighting 0,0001 g., samples up to 0,5 kg. Fuel moisture probe required

Usage area: Determination of calorific value of biofule and solid fuel

Keywords: Calorific value, fuel, moisture content, analysis

Optical scanner Nextengine for reverse engineering

Description: Optical scanner Nextengine for reverse engineering

Technical specification: Desktop optical 3D scanner for using in the rooms witg normal light conditions. Two regimes of scanning (Macro and Wide), scanning speed - 50000 points/sec., capture density up to 160K points / in (Macro) and 22.5K points / in (Wide); Field Size 5.1” x 3.8” (Macro) and 13.5” x 10.1” (Wide). High-precision rotary servo positioner, auto-incremented under scanner control (20 lb capacity), Universal part holder to adjust height, angle, and orientation of capture (10 lb capacity). Software to Scan, Align, Polish, and Fuse 3D Models. High-performance OpenGL 3D viewer; Scan inside SolidWorks; 2X scan speed, 4X raw point data, Large Object (23” x 17”) mode

Usage area: Scanning of 3D objects and creation of their surfasic and solid geometrical models for reverse engineering purposes and in other cases, when it is impossible or to difficult to obtain 3D computer geometric models of the objects, necessary for their visualization or for computational needs (for example, when modeling biomechanical systems)

Keywords: 3D scanning, computer geometric model, surfasic model, solid model

Scanning electron microscope

Description: Scanning electron microscope

Technical specification: Resolution in high vacuum up to 1.2 nm (30 kV, SE), up to 2.5 nm (30 kV, BSE) and up to 3 nm (1 kV, SE). Three available vacuum regimes: high vacuum (<6E-4 Pa), low vacuum (10-130 Pa), ESEM (10-4000 Pa). Conductive and isolating samples can be investigated.

Usage area: Sample vizualization

Keywords: Microscope, magnification, visualization, scanning electron microscope, SEM, electron microscope, secondary electrons, back scattered electrons, environmental SEM, ESEM, field emission gun, FEG

Stand of solid biofuel combustion research

Description: Stand of solid biofuel combustion research

Technical specification: 20 kW thermal power

Usage area: Burning of various granular fuels, usage of smoke analyzer to measure the consentrations of combustion products

Keywords: Solid fuel

Stand of thermo physical characteristics of liquid fuel

Description: Stand of thermo physical characteristics of liquid fuel

Technical specification: Liquid fuel vapour pressure (0-100 kPa, 18-90 oC); by Reid

Usage area: Determination of vapour pressure of light petroleum products

Keywords: Petroleum products, vapour pressure, Reid analysis

Stand of volatility charakteristics analysis

Description: Stand of volatility charakteristics analysis

Technical specification: Flash point; 18-100 oC

Usage area: Deetermination of the liquid fuel flash point

Keywords: Liquid fuel, flash point, analysis

Keywords: f

Stand of solid fuel combustion research

Description: Stand of solid fuel combustion research

Usage area: Only for the study process

Keywords: f

Keywords: f

Keywords: f

Combusion procuts components analyzer "MultilyzerNG``

Description: Combusion procuts components analyzer "MultilyzerNG``

Technical specification: CO consentration measurement range from 0-20000 ppm; SO2 measurement range from 0 to 2000 ppm; NO measurement range from 2000 ppm; 02 measurement range from 21 %

Usage area: Analysis of gas components in combustion products

Keywords: Smoke analysis, emission

3D printer

Description: 3D printer

Technical specification: models size 200x150x150 mm

Usage area: 3D printing

Keywords: 3D printing

Products of combustions gas components analyzer

Description: Products of combustions gas components analyzer

Technical specification: CO consentration measurement range from 0-2000 ppm; SO2 measurement range from 0 to 2000 ppm; NO measurement range from 2000 ppm; 02 measurement

Usage area: Analysis of gas components in combustion products, burning different fuels

Keywords: Smoke analysis, emission

X-ray fluorescence spectrometer TIGER S 8

Description: X-ray fluorescence spectrometer TIGER S 8

Technical specification: quantitative measurements of elements from beryllium to uraniumin in solids and liquids.

Usage area: Qualitative, quantitative and non-standard measurements of elements

Keywords: XRF

Rub fastness tester also called VESLIC IG/10/MOD (f. GIULIANI), Nr. 14279

Description: Rub fastness tester also called VESLIC IG/10/MOD (f. GIULIANI), Nr. 14279

Technical specification: Mass od finger 500 g, moving frequency of 40 cycles/min

Usage area: Appliance for testing the colourfastness to the wiping according to LST EN ISO 20344

Keywords: Colourfastness

GENERAL PURPOSE STRAIN VIEWER (Ref. S-18)

Description: GENERAL PURPOSE STRAIN VIEWER (Ref. S-18)

Technical specification: Field of view 260mm x 260mm, the total size of 445 x 280 x 280mm

Usage area: Products to determine the residual stresses in them

Keywords: quality control inspection of glass and plastics components

Stand of research for solid and liquid elemental composition

Description: Stand of research for solid and liquid elemental composition

Usage area: Only for the study process

Keywords: f

Mobile multi-channel electronic PC measurement unit for parallel, dynamic measurement data acquisition using a computer for the measurement of various mechanical parameters

Description: Mobile multi-channel electronic PC measurement unit for parallel, dynamic measurement data acquisition using a computer for the measurement of various mechanical parameters

Technical specification: Mobile portable computerized data acquisition system for measurements of mechanical parameters Spider Mobil 8 (HBM, Germany). 8 channel amplifier having wire interface with PC where data acquisition and processing software Catman32-E is installed; set of transducers: accelerometer (100 g, 0-250 Hz), tensile and compressive force (0-2 and 0-50 kN), displacement (0-2, 0-10 and 0-100 mm) and pressure (0-20, 0-100 and 0-200 bar). Precision class – not lower than 0,1%; Non-linearity – less than 0,05%.

Usage area: System may be used in cases when there is necessary to measure synchronically one or several mechanical parameters varying in time independently on the presence or absence of the electric supply (220 V)

Keywords: Measurements, amplifier, displacement, force, pressure, acceleration

Spectroscopic ellipsometer

Description: Spectroscopic ellipsometer

Technical specification: Spectroscopic ellipsometer covers UV-VIS-NIR spectral range. Available angles for measurements 12-90 deg with 0.01 deg resolution. Possibility to measure with focused beam 70x150 um. High resolution UV-VIS detector covers 190-900 nm range with 0.5 nm resolution, fast UV-VIS detector covers spectral range of 190-900 nm (1024 wavelengths), high resolution NIR detector 800-2000 nm with 3 nm resolution. Automated sample positioning with sample visualization via digital camera.

Usage area: Device is feasible to analyse optical constants (k(λ), n(λ)), thickness of thin isotropic and anisotropic transparent and non-transparent layers on isotropic and anisotropic transparent and non-transparent substrates. It can be also used for evaluations of periodical structures (scatterometry) and absorption kinetics in liquids.

Keywords: Spectroscopic ellipsometer, optical constants, refractive index, absorption coefficient, extinction, dispersion, dispersion curve, thickness determination, ellispometer

Three stage cascade impactor "Dekati® PM10" for determining gravimetric mass size distribution of particles

Description: Three stage cascade impactor "Dekati® PM10" for determining gravimetric mass size distribution of particles

Technical specification: Sample flow rate - 10 to 30 l/min. Three impactor stages for particles >10µm, 2.5µm and <1 µm.

Usage area: Aerosol particle dispersion composition analysis (0 - 1μm, 1 - 2.5μm, 2.5 - 10.0μm)

Keywords: Aerosol particles, dispersion composition.

Plate bearing equipment with 100kN hydraulic system to perform the plate load test.

Description:

Apparatus is useful standard tool to determine the strain modula, and the bedding modula of soils and flexible pavements by repetitive loading.

Technical specification:

load plate 300 mm, hydraulic system with hydraulic pump 100 kN.

Usage area: Apparatus is useful standard tool to determine the strain modula, and the bedding modula of soils and flexible pavements by repetitive loading.

Keywords: bearing test, strain modula, bedding modula

Mass detector and liquid chromatography system

Description: Mass detector and liquid chromatography system

Technical specification: System consists of mass detector and HPLC system. Mass detector is single quadrupole, the mass range 0-3000m/z, ESI, APCI positive/negative ionization modes. The sample could be separated by high perfomance liquid chromatography using reverse phase column (BEH C18). Eliuent could be mixed using four solvents.

Usage area: Molecular weight detection of organic materials, purity estimation of the organic materials

Keywords: Molecular weight, chromatography, purity

Koala Deluxe Tehter

Description: Koala is a mid-size robot designed for real-world application research. Bigger than Khepera, more powerful, and capable of carrying larger accessories, Koala has the functionality necessary for use in practical applications (like sophisticated battery management), rides on 6 wheels for indoor all-terrain operation, and sports stylish bodywork for attractive demonstrations. In addition to these new features, Koala retains a shape and structure similar to Khepera, such that experiments performed on Khepera can be migrated to Koala. The BIOS of both robots is compatible, permitting programs written for one robot to be easily adaptted and recompiled for the other.

Technical specification: Motorola 68331 / 22Mhz, min. speed - 0.005 m/s, 12 digital inputs 6 analog inputs, 4 digital outputs

Usage area: Robot motion control

Keywords: robot, mobile, autonomous

Fermenters

Description: Fermenters

Technical specification: fermenters with working volume 35-500 ml and 300-1200 ml, infrared radiation is used to warm the culture; does not require cooling water. used to warm the culture;

Usage area: Fermentation and cultivation with bacteria, yeasts or fungi.

Keywords: Laboratory fermenters, microbiological culture, fermentation

Multipurpose industrial robot IRB 120

Description: IRB 120 is the smallest multipurpose industrial robot developed by ABB and weighs only 25kg. This six degrees of freedom robot can handle payloads up to 3 kg and 580mm reach space. This mokomoasis stand with two ABB IRB 120 robot is designed for students to learn to manage ABB's industrial robots. Embodied robotics, automation and control, mechatronics, mechanical knowledge.ABB robot control program is compiled using the RAPID programming language. The robotic design, its technical features allow to solve various manipulation. objects in space problems.

Technical specification: Max load -3kg, work distance -70cm, precision - 0.1mm

Usage area: Industry, omject manipulation

Keywords: robot arm

Specimen cutter

Description: Specimen cutter

Technical specification: cutting disk - 140 mm, precision - 20 mkm

Usage area: metalogrphic analysis

Keywords: metalogrphic analysis

Chromatography System

Description: Chromatography System

Technical specification: Single Quadrupole, ionisation mode ESI and/or APCI, 15,000 u/sec fast scanning speed, ultra-fast analysis and separation

Usage area: Separation of organic compounds, mass detection

Keywords: chromatography, analytical, preparative, mass spectroscopy

T-Rex 1224 CNC Gantry Router

Description:

T-Rex is designed specifically for the industrial milling machine, engraving, cutting.

Technical specification:

Engine Kress milling engine 1050 Watt with 8mm collet. Travels: X=2400mm; Y=1200mm; Z= 130 mm. Weight +/-. 500 kg

Usage area: Industrial milling machine, engraving, cutting for wooden, plastic, pp, soft metal materials

Keywords: Routing, cutting

Laser ellipsometer L115

Description: Laser ellipsometer L115

Technical specification: Length of the light wave used is 632.8 nm. Thickness of films possible for analysis is 0.001 - 1 µm. Uncertainty of thickness measurements is ±(0.5 – 1) nm. Accuracy of the refractive index measurements ±0.01.

Usage area: Measurements of refractive index and thickness of the dielectric and semiconducting thin films, semitransparent thin metal films (< 50 nm), polymeric thin films (e.g. photo resist).

Keywords: Laser ellipsometer, thin films, thickness, refraction index

picoammeter / bias source

Description: picoammeter / bias source

Technical specification: bias /- 500V current 100 fA - 20 mA

Usage area: I-V measurements

Keywords: I-V measurements

Raman scattering spectrometer Renishaw in Via Spectrometer with accessories

Description: Raman scattering spectrometer Renishaw in Via Spectrometer with accessories

Technical specification: 532 nm, 45 mW semiconductor laser awaking 2400 lines / mm grating, termoelektriškai 1024 pixels cooled CCD Stokes lines measuring range from 100 cm-1 to 8000 cm-1 resolution - better than 1 cm -1. Leica confocal microscope with 3 lenses x20, x50 and x100.

Usage area: Raman scattering spectroscopy can be used for thin layers of powder and aqueous solutions of the investigation. In addition to information about the structure of materials, Raman spectroscopy can be used for some types of stress in thin layers of review. Software complex for Raman scattering spectra in the confocal micro-Raman optical system and luminescence measurements.

Keywords: Raman spectroscopy, materials research, identification

AFM Scanning probe microscopy system JPK NanoWizard 3

Description: Scanning probe microscopy system JPK NanoWizard 3

Technical specification: Operating modes: contact, intermittent contact or AC or tapping, non-contact, lateral force microscopy, Phase imaging; Force mapping; Quantitative imaging: images of the surface force curve, the force-distance spectroscopy of force-distance volumetric imaging mode, conductivity microscopy. Scanning field 100x100 μm height up to 15 μm.

Usage area: For measurements of the surface topography and the mechanical, electrical and magnetic properties in the air and fluids. For solids, polymers, biological samples and molecular characterization, nanomanipulation and nanolithography. Development and research of advanced new materials and thin films; control of technological processes at the nano-scale.

Keywords: AFM, atomic force microscopy, topography, morphology, nanolithography, nanotechnology, microscopy

Mask aligner and nanoimprint lithography

Description: Mask aligner and nanoimprint lithography

Technical specification: UV400: 350-450 nm; UV300: 280-350 nm; UV250: 240-260 nm. UV nanoimprint lithography, soft and hard contact, photomask size 102x102 and 127x127 mm.

Usage area: Mask alignement, UV exposure, nanoimprint lithography

Keywords: UV light, exposure, photolithography, optical lithography, nanoimprint lithography,

ICP deep reactive etching system,

Description: ICP deep reactive etching system,

Technical specification: Homogeneous etching area diameter 15 cm

Usage area: deep reactive ion etching, bulkmicrofabrication

Keywords: deep reactive ion etching, bulkmicrofabrication

Hydrothermal processing of materials under high pressure system

Description: Hydrothermal processing of materials under high pressure system

Technical specification: Max. temperature 350 oC Max.pressure 115 Bar.

Usage area: synthesi of materials under high pressure

Keywords: autoclave

Dilatometer L75H1600C

Description: Dilatometer L75H1600C

Technical specification: Temperature interval - from room temperature to 1600 °C; max. sample size - 50 mm; sample diameter - 7/12/20 mm; measuring range: lowest limit - 100 mm, upper limit - 5000 mm.

Usage area: The evaluation of changes in the sample dimensions (volume) while the substance is subjected to a controlled temperature program in a specified atmosphere. Typical materials under investigation are: composite materials, glass, polymers, ceramics, metals. Besides, powder can also be analysed.

Keywords: Dilatometry

Automotive diagnostics platform

Description: The measuring and diagnosis module FSA 720 is the automotive diagnostics platform. The modular system structure permits connection to existing and new diagnostics systems for education purpose.

Technical specification: Stroboscope; Oil temperature sensor; Operating temperature range 5 °C to 40 °C

Usage area: For automotive electrical and electronic system components diagnostics

Keywords: Automotive, electronic system, components, diagnostics

XRD: X-ray diffractometer D8 Discover, Bruker

Description: X-ray diffractometer D8 Discover, Bruker

Technical specification: Specification: 2.2 kW X-ray tube with Cu anode. Parallel beam/ Bragg-Brentano geometry, Göbel mirror, 2xGe(022) crystal monochromator, rotary absorber, scintillation detector, 1D LynxEye detector, Eulerian cradle (X, Y, Z, Psi, Phi), Chi ir Xi motorized positioning table, X-ray reflectivity acessory, motorized slit accessory, PATHFINDER optics.

Usage area: Qualitative and quantitative analysis of chemical compounds; Ab initio-crystal structure of chemical compounds to identify and clarify; Material microstructure analysis (crystallite sizes, micro-stress, to determine the degree of crystallinity); X-ray diffraction measurements at a sliding angle of the focused (GID); Micro-Diffraction measurements; Small reflectometry and high resolution

Keywords: X-ray diffraction, structure, thin layers, analysis of chemical compounds

Mixed Signal Oscilloscope DLM2054

Description: Mixed Signal Oscilloscope DLM2054 4ch, 500MHz BW, used to observe signals in electronic circuits.

Technical specification: 500MHz Bandwidth, 4 channels, maximum sampling rate 2.5GS/s, Maximum record length 250 Mpoints

Usage area: Electronic circuit analysis and debug

Keywords: Mixed Signal Oscilloscope DLM2054

400 MHz NMR apparatus

Description: 400 MHz NMR apparatus

Technical specification: 9.4 Tesla permanent magnetic field . Room temperature homogeneity outdoor activities ( shim ) system for optimal magnetic field homogeneity needed for 1D , 2D and 3D experiments without rotation of the sample cuvette , and not less than 20 orthogonal gradient control. Not less than 2 equivalent and interchangeable frequency channels of communication with the full wide -frequency generation in each , and the minimum interval for each channel 6-430 MHz Complete digital phase and amplitude of the best generation of long-term stability to achieve Digital real- time compensation The required frequency change: steps < 0.01 Hz Phase change: steps < 0.01 Grad, with no more than 25 ns duration Radio frequency system output signal phase singalong / accuracy by changing the power attenuation ( monotony ): not more than / - 0.5 and 90 dB power conversion range. Individual and / or along the phase , frequency and / or amplitude of the event time : no more than 25 ns Impulse control temporal resolution of 12.5 ns or less Software -controlled variable temperature unit , the temperature change of 0.1 ° C increments  . Temperature changes at the interval narrower than the range - 150 to 180 ° . a) 5 mm head with actively shielded Z - gradient, can apply monitoring / irradiation of the NMR core range from 15N to 31P ( below) as well as 1H and 19F . Automatic selection, setting and atitaikymas all clusters interval from 15N to 31P . The ability to record the 1H and 19F spin interactions termination and vice versa . The minimum required parameters : Signal / Noise: 19F sensitivity ≥ 350:1 (TFT sample , the 1H interactions termination ) 31P sensitivity ≥ 150:1 ( TPP sample) 13C sensitivity ≥ 190:1 (ASTM test) 15N sensitivity ≥ 25:1 (90 % formamide sample) 1H sensitivity ≥ 450:1 (0.1 % EC sample , 200 Hz) Temperature changes at the interval narrower than from - 150oC to 150 oC . b ) CP / MAS head 15N - 31P , 1H ; Rotor size 4 mm, rotation frequency up to 15 kHz; shall be accompanied by a pneumatic module for precise spin speed , transfer MAS rotor system . The head must be compatible with automatic sample changer. Temperature changes at the interval narrower than the range of -50 ° C to 80 ° C .

Usage area: For NMR investigations in solutions at variable temperature. 1H NMR, 13C NMR, 31P NMR, DEPT, INEPT, COSY, TOCSY, NOE, 13C HSQC, 13C HMBC.

Keywords: Nuclear magnetic resonance NMR, COSY, DEPT, HMBC, HSQC, NOE

700 MHz NMR spectrometer

Description: 700 MHz NMR spectrometer

Technical specification: 9.4 Tesla permanent magnetic field . Room temperature homogeneity outdoor activities ( shim ) system for optimal magnetic field homogeneity needed for 1D , 2D and 3D experiments without rotation of the sample cuvette , and not less than 20 orthogonal gradient control. Not less than 2 equivalent and interchangeable frequency channels of communication with the full wide -frequency generation in each , and the minimum interval for each channel 6-430 MHz Complete digital phase and amplitude of the best generation of long-term stability to achieve Digital real- time compensation The required frequency change: steps < 0.01 Hz Phase change: steps < 0.01 Grad, with no more than 25 ns duration Radio frequency system output signal phase singalong / accuracy by changing the power attenuation ( monotony ): not more than / - 0.5 and 90 dB power conversion range. Individual and / or along the phase , frequency and / or amplitude of the event time : no more than 25 ns Impulse control temporal resolution of 12.5 ns or less Software -controlled variable temperature unit , the temperature change of 0.1 ° C increments  . Temperature changes in the range - 150 to 180 ° . a) 5 mm head with actively shielded Z - gradient, can apply monitoring / irradiation of the NMR core range from 15N to 31P ( below) as well as 1H and 19F . Automatic selection, setting and atitaikymas all clusters interval from 15N to 31P . The ability to record the 1H and 19F spin interactions termination and vice versa . The minimum required parameters : Signal / Noise: 19F sensitivity ≥ 350:1 (TFT sample , the 1H interactions termination ) 31P sensitivity ≥ 150:1 ( TPP sample) 13C sensitivity ≥ 190:1 (ASTM test) 15N sensitivity ≥ 25:1 (90 % formamide sample) 1H sensitivity ≥ 450:1 (0.1 % EC sample , 200 Hz) Temperature changes at the interval narrower than from - 150oC to 150 oC . b ) CP / MAS head 15N - 31P , 1H ; Rotor size 4 mm, rotation frequency up to 15 kHz; shall be accompanied by a pneumatic module for precise spin speed , transfer MAS rotor system . The head must be compatible with automatic sample changer. Temperature changes in the range of -50 ° C to 80 ° C .

Usage area: for recording NMR spectra from solutions in various temperatures. 1H NMR, 13C NMR, 31P NMR, DEPT, INEPT, COSY, TOCSY, NOE, 13C HSQC, 13C HMBC.

Keywords: Nuclear magnetic resonance NMR, COSY, DEPT, HMBC, HSQC, NOE