Household waste and special biological and physical-biological treatment and / or compaction technology research and development

Description:
Possible services: * water quality setting; * pilot installation design and production; * pilot installation of wiring and adjustment works; * analyte (works carried out in the customer's company); * the study of optimal operating mode selection processes and system performance tests. The duration of services: at least 8 months (depending on the customer's activities).

Research and creation of innovative cosmetic prescriptions

Description:
Creation of innovative cosmetics prescriptions Description: The basic cosmetic prescription. Consultation bioactive additives (vitamins, minerals, flavonoids, hydroxy acids, UV filters) application in cosmetics issues. Raw materials and additives advantages and disadvantages of additive benefit. Detailed description: - Review of the literature* and formation of experimental schemes. - One type of cosmetics formulator of preparation, indicating the percentage of ingredients. - Stability studies of developed product. - Analysis of the results, conclusions and recommendations. * Taking into account the customer's preferred raw material. Duration ~ 12 months.

Drinking water quality testing and management, water treatment technology research and development.

Description:
Water is essential for life - it is an indispensable component of nutrition, because the vital processes can take place only if there is enough water in the cells. Water accounts for the largest part of the human body - about 60-70 percent. Nothing humans do not perform so much more variety of functions like water: it is necessary physiological digestion and elimination processes, supports cellular fluid physical and chemical stability, maintain body temperature invariable. The water shortage is very sensitive to the brain, which contains 85 per cent. of water. Since the brain is only 2 percent. Human body weight, except water and oxygen consumption by 20 per cent. Total body's needs. It is important to get the required daily amount of water, so a healthy person the recommended daily oral administration of approximately 8 glasses of water. Detailed description of the service: - Detailed water quality studies and experiments schemes * Conclusion - Pilot installation design and production - Pilot installation of installation and adjustment works - Analyte * - Study the optimal working mode selection processes and system performance tests * Work carried out in the customer company. Duration of service - about 10 months.

Ultra high performance concrete development and research

Description:
•It has been proved that ultra high performance concrete can be prepared not only from expensive reactive powder but also from cheaper (local) materials. •Research has already found links between concrete's properties and durability as well as identified its change patterns; •The technology for achieving the optimum composition of the concrete as well as using it in a mixture has also been identified.

Laser interference lithography (LIL), hidden image holograms, 2D-3D holograms, rainbow holograms

Description:
The service provides original hologram fabrication in light sensitive recording media forming sub-micrometer size dimensional variable relief structures (or variable refractive index structures) for document security and brand authentication. Holograms are recorded using the physical object (model) or computer graphics supplied by the customer. Three-dimensional holograms (3D), 2D/ D holograms, hidden image holograms and combined hologram of high degree of protection recording are fabricated using optical tables, optical-mechanical components, controls, lasers and other devices. Combined hologram recording can be made by combining: a) 3D electron beam lithography with 2D/3D holograms, b) dot-matrix holograms with 2D / 3D holograms, c) 2D/3D holograms with hidden image holograms and so on.

Optical document security measures and their production technologies and research

Description:
We can make products from stickers (in many different shapes of self-decaying seals) to difficult optic changing holograms. We do: projecting holographic signs and manufacturing of original; manufacturing of metal stamp; micro relief on metal polymeric band; making an adhesive layer and cutting holographic sticker in shape you need. Products are made in high technologies: interference holographic lithography, electronic nano–lithography, optic micro lithography, vacuum and electrochemical covers and other modern equipment and technology.

Spin coating

Description:
null

Architectural design

Description:

Design of all types (individual, public) and types (residential, commercial, industrial, etc.). Interior design for all types and types of structures. Environmental management, landscape design. The opportunity to submit a TP / DP project to Open BIM. Visualization of projects using virtual simulation (graphic art, video) and volumetric patterns.

Development of innovative transport systems for logistics centers

Description:

Designing and managing algorithms for innovative logistics centers for automated cargo transportation systems to increase order picking system. Production - Human performance. The simulation modeling methods and the AutoMod program are applied to the research, the methods of multivariate regression and dispersion analysis are used for the analysis of modeling results and system efficiency indicators

Monomers, polymers and their composites from renewable resources

Description:

Synthesis and characterization of polymers and their composites from renewable recourses

System Vehicle / Driver / Environment Element Interoperability Models

Description:

Generating universal "vehicle-driver-environment" dynamic models that comprehensively assess the dynamics of individual vehicles and their groups in traffic flows. Estimates of environmental pollution, noise, energy consumption parameters, relevant for the assessment of infrastructure and / or vehicles / vehicles in predicting the development of the transport system. The models are revised to investigate vehicle loads and materials used to ensure the reliability of vehicles.

Determination of aerodynamics and flight dynamics of aircraft and unmanned aerial vehicles (UAV)

Description:

Theoretical and experimental investigations of various types of aircraft (UAV's, gliders, airplanes, missiles) are carried out, including theoretical and experimental investigations of critical modes (flats), estimating the forms and frequencies of the oscillations of aircraft structural elements. Using computer simulation and experimental methods, the strength, stability and reliability characteristics of aviation and rocket structures developed from solid and composite (composite) materials are investigated.

Industrial plant energy audits

Description:

Energy audits are carried out at the industrial enterprises in order to explain the irrational use of energy in a variety of forms (heat, electricity, compressed air, water, etc.) (due to outdated technology, inefficient process, poor energy management, etc.) and to propose measures for the company's energy farm modernization. According to the methodology approved by the Ministry of Energy of the Republic of Lithuania, about 20-40 pages are prepared. document adding the required attachments. The purpose of audit work in technological processes and equipment is to assess the energy and water losses in technological processes and equipment and to provide technical organizational measures for reducing energy and water losses.

Strength analysis, simulation and experimental studies of composite and metallic structures.

Description:

Numerical and experimental approaches for stress analysis of composite and metal structures, mechanical testing of materials and constructions;

Research of high-performance structures and composite materials, application of advanced engineering methods for innovative structural solutions;

Composite and metal structures: testing, characterization, design, optimization (stress analysis, fatigue strength, fracture and impact mechanics).

 

Optimization of heat supply networks

Description:

Heat supply networks were set up in the cities of the country 30-40 years ago, due to the fact that due to cheap energy resources centralized heat supply was applied both to heating the residential sector and to supply heat to industrial enterprises. In recent decades, due to the difficult economic situation, the contingent of consumers has changed and diminished, but heat supply networks in many areas have remained little changed. Upgrading the heat supply networks requires as accurately as possible to assess the needs of existing consumers and the dimensions of the new pipelines, thus ensuring a minimum operating cost in the future.

Space Syntax analysis of urban structures

Description:

The analysis of space syntax allows modeling the movement of people in the city, identifying areas more often and less frequently, assessing the attractiveness of urban areas for commercial activities, etc.

Research of dynamics and energy efficiency of vehicles with alternative fuels and hybrid power plants

Description:

Creates a model for determining the energy consumption, which allows us to evaluate the technical parameters of vehicles, the number of passengers, the state of the road and the geometry of the vehicle, as well as the traffic flow characteristics. Algorithms for determining power needs and energy consumption are set up. Particular studies of vehicle movement parameters, flows and geometry are performed. Methodology is created.

Research, development and modernization of refrigeration and heat pump systems and its components

Description:

In industrial and household refrigeration systems, about a quarter of all electricity is consumed, therefore the improvement of these systems has always been and will remain an urgent task. Today, the industry faces new challenges in the area of ​​protection of the ozone layer and the limitation of greenhouse gases. The main challenge for the refrigeration industry today is the transition to organic refrigeration agents, since F-gas will be banned after four years. Research and development of such systems is the field of competence and competence of research groups (V. Dagilis, L. Vaitkus, A. Balčius). The result will be 15-30 pages. technical feasibility study to evaluate the efficiency of the compressor under investigation, the effect of technical solutions on efficiency, using numerical compressor simulations.

Textile material characterization, production optimization of process parameters as well as new construction textile materials.

Description:

Investigations of various mechanical and other physical properties of textiles and determination of their dependence on structure parameters are carried out. The technological parameters of textile production are investigated and optimized. New textile materials are created according to their functional or aesthetic requirements.

Studies on the physical-mechanical properties of various polymer materials (plastics, rubber, leather, soft laminates, polymer composites).

Description:

 Performing tests on tensile, bending, compression properties (it is possible to investigate at high temperatures in a thermal chamber), density determination, wear resistance of rubber, cold bending resistance and other standard and non-standard tests. In the absence of appropriate standard tests, original test methods may be created.
 

Feasibility study on the development of new textile technologies and materials

Description:

Feasibility study on the field of applied research and experimental development in the field of textile, in which 10-30 sheets (depending on the complexity of the object and / or number of objects) will be conducted. Technical feasibility study - analytical work aimed at evaluating the planned implementation of the R & D project technological and / or commercial viability

Emission testing and reduction in combustion products

Description:

In the combustion process research laboratory, combustion process studies are carried out to find ways to reduce the quantities of emissions into combustion products by primary means. This is particularly relevant for reducing nitrogen oxide emissions. The Multilaizer and IMR-based smoke analyzers in the laboratory are carried out by measuring the oxygen content of O2, carbon monoxide CO, nitrogen oxides NOx and sulfur oxides SO2 in combustion plants.

Biofuel and other fuels energy study

Description:

Perform research on the energy properties of various biofuels and other fossil solid and liquid fuels. The upper calorific values are determined by the laboratory devices and further, according to the standards, are re-calculated to the lower calorific value of the fuel. In this way, the analysis of ash content and the analysis of dry matter content are carried out.

Effective using of thermal energy

Description:

With the improvement of technological equipment and process management, with increasing energy resources, increasing attention is paid to increasing heat energy efficiency, waste heat recovery, and the recovery of heat energy from renewable energy sources. This reduces production costs and improves the competitiveness of enterprises.