|
SEM: Scanning electron microscope - FEI Quanta 200 FEG
Description: Scanning electron microscope |
|
|
Shimadzu Liquid chromatograph mass spectrometer LCMS-2020
Description: Liquid chromatograph mass spectrometer LCMS-2020 can detect molecular masses with high accuracy, from which can be checked the purity of compounds, ascertain whether the required compound is obtained. This is a powerful method since identification takes place at low concentrations. With its array of ultrafast capabilities, LCMS-2020 mass spectrometer provides the ultimate in high-speed analysis with unrivaled sensitivity. It offers faster, more accurate detection of trace impurities present in pharmaceuticals samples, environmental pollutants, or other samples. LCMS-2020 can detect masses in range m/z 10 to 2000 and achieve an ultra-fast polarity switching time of just 15 ms. |
|
|
XPS: Universal X-Ray photoelectron and ion scatering spectroscopy surface analysis system - ThermoFisher ESCALAB 250Xi
Description: Quantitative and qualitative surface analysis using X-Ray photoelectron spectroscopy, ion scattering spectroscopy, reflection electron energy loss spectroscopy, angle Resolved XPS (ARXPS) with Ar ion surface eching/cleaning possibility |
|
|
3D-Computed X-ray tomography system Rayscan 250E
Description: Computed tomography (CT) is an imaging procedure that uses X–ray source to irradiate the object at different angles and 2D images at a flat panel detector are recorded. Later 3D images of the density distribution inside the object are reconstructed. The computerized tomography calculation allows the 3D reconstruction of the measured volumetric data inside the object. Up to 3 μm resolution can be achieved. |
|
|
Bruker Avance III 700 instrument
Description: Nuclear Magnetic Resonance spectrometer for investigation and identification of organic compounds in solutions. This includes the solution of biological macromolecules (eg proteins, DNA and oligosaccharides) and the identification of low molecular weight compounds. Pure compounds as well as multi-component mixtures can be analyzed. The spectrometer can record the magnetic resonance spectra of the 1H, 13C, 15N, 19F, 31P nuclei, and various two-dimensional spectra. The Avance III 700 MHz is a three-channel NMR device with a magnetic field of 16.4 Tesla with a 54 mm room temperature channel, a built-in cryogenic triple-resonance head, as well as a 60-position automatic sample changer. |
|
|
Bruker Avance III 400 instrument
Description: Nuclear Magnetic Resonance spectrometer for identification of organic compounds in solutions. The device can analyze pure compounds and multi-component mixtures. The spectrometer can record the magnetic resonance spectra of the 1H, 13C, 15N, 19F, 31P nuclei, and various two-dimensional spectra. The principle of operation is based on different electron shielding of the nuclei. The device has a permanent magnetic field of 9.4 Tesla, a room-uniform shim system for optimum magnetic field uniformity required for 1D, 2D and 3D experiments without sample cell rotation; at least 20 orthogonal gradient controls and 60-position automatic sample changer. |
|
|
Hybrid mass spectrometer with time of flight mass analyser
Description: Hybrid mass spectrometer with time of flight mass analyser is able to record molecular masses with high accuracy, from which molecular formulas can be calculated. This is the most powerful method for the identification of individual compounds present in complex mixtures at low concentrations. Measure of molecular masses is very important in materials development and quality control. Ultra performance liquid chromatography (UPLC) allows separation of the mixtures of compounds of high to medium polarity. UPLC can separate compounds and record UV spectra in the range of 200-500 nm, and MS spectra in the range of 20-8000 m/z with the accuracy of less than 1 ppm. |
|
|
Comprehensive GC×GC system with time-of-flight mass spectrometer
Description: Pegasus 4D GCxGC-TOFMS system used for determination and identification of volatile aroma compounds in the liquid sample and in the headspace of sample matrix (vapour phase). Qualitative and quantitative chromatographic analysis of chemical composition of the essential oils, volatile extracts, spicy and medicinal herb, and etc. Complex sample analysis, separation and identification of individual volatile aroma compounds. Sample inlet CIS4 system with refrigeration (split/splitless), which could be combined with static headspace gas station, thermodesorbtion (TDA) and solid phase microextraction (SPME) stations. Gas chromatograph working temperature interval +4 to 450 °C, carrier gas preassure in the range of 0-150 psi (split/splitless injector), Time of flight mas spectrometer (TOF MS) with electron ionization source (EI), mass ranges 5-1000 amu, mass resolution FWHM is higher than 1000, TOF MS is combined with two dimentional gas chromatograph in 1D and 2D mode; TOF MS enables automatic optimization of MS parameters and automatic mass calibrations. |
|
|
Bruker micrOTOF-QIII spectrometer
Description: The Bruker micrOTOF-QIII spectrometer can be used to accurately determine the molecular weights of organic compounds and to check the purity of compounds. The device features an automated LC-MS system for generating chemical formulas, molecular formula validation, and general LC-MS measurements. The Bruker micrOTOF-QIII Spectrometer can be used to validate formulas, identification of the compound with LC, GC or direct probe, extended identification. The mass found on the spectrometer is for a very wide range of 20 to 40,000 m / z, a mass of 1 to 2 ppm RMS, a mass resolution of 20,000 (FWHM) at LC. |
|
|
XPS: X-Ray photoelectron spectroscopy and Auger electron spectroscopy system - KRATOS XSAM800
Description: Quantitative and qualitative surface analysis using X-Ray photoelectron spectroscopy and Auger electron spectroscopy |
|
|
XRD: X-ray diffractometer - Bruker D8 Discover
Description: Qualitative and quantitative analysis of chemical compounds; Ab initio-crystal structure of chemical compounds to identify and clarify; Material microstructure analysis (crystallite sizes, micro-stress, to determine the degree of crystallinity); X-ray diffraction measurements at a sliding angle of the focused (GID); Micro-Diffraction measurements; Small reflectometry and high resolution |
|
|
MBE: Molecular beam epitaxy system - KRATOS
Description: KRATOS molecular beam epitaxy system for GaAs with control. |
|
|
Electrophoresis unit OmniPAGE
Description: |
|
|
High performance liquid chromatograph
Description: |
|
|
Centrifugal Vacuum Concentrator/Freeze Dryer
Description: |
|
|
Electrophoresis technique SDS-PAGE.
Description: |
|
|
Water activity measurement, CR400 CR-400, Konica Minolta
Description: |
|
|
Vacuum sublimation equipment
Description: |
|
|
Accelerated solvent extraction "ASE 350" TurboVap LV
Description: |
|
|
Bottle filler
Description: |
|
|
Equipment of Dairy Components Concentration
Description: |
|
|
Supercritical extractor „Helix“
Description: Supercritical extractor |
|
|
Supercritical extractor
Description: |
|
|
Gas analyser OPTIMA7 BIOGAS
Description: |
|
|
Potentiostat mAUTOLAB
Description: |
|
|
Schleibinger Geräte GmbH VICASONIC ultrasound apparatus
Description: |
|
|
Distiller Buchi Glass Oven B-585
Description: |
|
|
Set of equipment for sublimation
Description: |
|
|
Melting point apparatus
Description: |
|
|
Optical tensiometer (contact angle meter)
Description: |
|
|
Shrinkage temperature determination instrument
Description: |
|
|
Dielectrical spectrometer Agilent E4980A Precision LCR meter
Description: |
|
|
Drug dissolution test
Description: |
|
|
Spectrophotometer GENESYS 8
Description: |
|
|
Luminescence spectrometer Perkin Elmer LS-55
Description: |
|
|
System for charge mobility measurements
Description: |
|
|
Biodegradability measuring complex
Description: |
|
|
Automated Soxhlet extraction
Description: |
|
|
Polarizing microscope (Olympus BX41) with light source and hotstage
Description: |
|
|
Leather processing equipment containing 1) apparatus for leather tanning process imitation and 2) shaker for solutions preparation
Description: |
|
|
FTIR spectrometer Perkin Elmer Frontier
Description: |
|
|
Constant climate chamber Memmert GmbH HCP-246
Description: |
|
|
Disperser IKA T 50 digital ULTRA-TURRAX
Description: |
|
|
Kugelrohr distillation system
Description: |
|
|
Glass oven Kugelrohr with accessories
Description: |
|
|
Melting point apparatus
Description: |
|
|
Micro Viscoamylograph Brabender
Description: |
|
|
Melt flow rate meter Thermo C-Flow
Description: |
|
|
Spectrophotometer Konica Minolta CM-5
Description: |
|
|
Spin Coater SPS SPIN-150
Description: |
|
|
Microbial Oxidative Degradation Analyzer Saida FDS Inc. MODA-6
Description: |
|
|
Turbo molecular vacuum system (end vacuum ~10 -7 mbar)
Description: |
|
|
Balances for big weights, model: MSE 12201S-0CE
Description: |
|
|
Photochemical reactor, Ace Glass
Description: |
|
|
X-ray single crystal diffraction spectrometer
Description: |
|
|
Analytical balances (0,001 mg) and balances table
Description: |
|
|
Interferometer, MarSurf WS 1
Description: |
|
|
spincoater, Chemat Technology Spin-Coater KW-4A
Description: |
|
|
Microwave reactor with hydrogenation module, Discover LabMate, CEM
Description: |
|
|
Pressure filtration vessel
Description: |
|
|
Nanosecond laser flash photolysis measurement system
Description: |
|
|
Microwave reactor with hydrogenation module, Discover LabMate, CEM
Description: |
|
|
Centrifugal pumps in series and parallel test bench BP-1S/EV
Description: |
|
|
Filter press and micro filter pilot plant FP-1S/EV
Description: |
|
|
sieve analysisi instrumen Sonic Sifter
Description: |
|
|
equipment of powder homogenizing WAB TURBULA T2F
Description: |
|
|
Fixed bed adsorption unit FBAU/EV
Description: |
|
|
tray dryer apparatus TD/EV
Description: |
|
|
Microscope Olympus SZX7 for crystals
Description: |
|
|
Spectrophotometer T70, PG Instruments limited
Description: |
|
|
liquid mixing apparatus LM/EV
Description: |
|
|
Spray dryer MSD/EV
Description: |
|
|
Thin film evaporation pilot plant ESSA/EV
Description: |
|
|
Continuous distillation pilot plant DCA/EV
Description: |
|
|
Linseis TMA PT1000 Thermomechanical Analyzer
Description: |
|
|
Gas chromatograph with TCD detector
Description: |
|
|
Double-effect falling-film evaporation pilot plant EDEA/EV
Description: |
|
|
Climatic chamber
Description: |
|
|
bending testing machine
Description: |
|
|
Autolab PGSTAT12 Potentiostat/Galvanostat
Description: |
|
|
UV/VIS spectrophotometer Lambda 25
Description: |
|
|
Spectrometer AANALYST400
Description: |
|
|
Nephelometer PersonalDataRAM - pDR-1000AN
Description: PDR-1000AN samples passively (i.e., without a pump) the air surrounding the monitor; air accesses freely the sensing chamber of the instrument by means of convection, diffusion, and adventitious air motion. Measures concentrations of dust, smoke, mists and fumes in real-time. |
|
|
Gas chromatograph-mass spectometer CLARUS 500
Description: |
|
|
Programmable rapid distillation system with external titratinion, Gerhardt
Description: |
|
|
Flame Photometer, PFP7, operating and Service Manual
Description: |
|
|
Compact Lab Fluid Bed Dryer/Granulator/Coater
Description: |
|
|
Resistance Meter
Description: |
|
|
Mass spectometer CLARUS 500
Description: |
|
|
High performance liquid chromatograph vith mass spectrometer
Description: |
|
|
Zwick Roell Materials Testing Machine
Description: |
|
|
martindale testing machine
Description: |
|
|
Microscope
DPM 300
Description: |
|
|
Stand of granular solid fuel burining test
Description: |
|
|
FAG BRAI³ Braille Dot Checker
Description: |
|
|
Paste Ink Proofer
Description: |
|
|
Hardness tester
Description: |
|
|
Insulation agains heat apparatus IG/ISOC (f. GIULIANI), Nr. 13917
Description: |
|
|
Multifunctional device Test 445
Description: |
|
|
Mixer Automax 5l
Description: |
|
|
Water vapour permeability test equipment STM 473 (SATRA), Nr. 473-5-0512:
Description: |
|
|
Bally penetrometer STM 703 (f. SATRA), Nr. 703-1-0512
Description: |
|
|
Elecrical resistance testing instrument (PEGASIL/ZIPOR), No. 50.130
Description: |
|
|
Electrodynamic Vibration Excitter systems
Description: |
|
|
Impact tester (PEGASIL/ZIPOR), Nr. 50.130
Description: |
|
|
Mask aligner MA-750
Description: |
|
|
Scale KERN PLE 310-3N
Description: |
|
|
Fiber optic spectrometer - Avantes AvaSpec-2048
Description: Reflection, transmission, absorption measurements in UV-VIS-NIR spectral range. Liquids can be analyzed in the standard cell, hard transparent (measured transmission and the absorption) or vague (measured reflection) samples |
|
|
AFM: Atomic force microscope - NT-206
Description: Atomic force microscope NT-206 |
|
|
Optical microscope (analyzer) - Nikon
Description: Measurement of linear dimensions of the transparent structures in manual and automatic modes with high fidelity |
|
|
EDS: X-Ray energy dispersion spectrometer - Bruker Quantax
Description: Energy dispersive X-Ray analysis, Determination of chemical composition , elemnt mapping |
|
|
Galvanoplasty system
Description: Fabrication of Ni replica matrix with submicron (nanometric) precision and high diffraction efficiency of the final product. |
|
|
Lloyd's mirror holographic lithography setup
Description: Lloyd`s mirror holographic lithography setup. |
|
|
MPCVD: Microwave plasma enhanced chemical vapor deposition system - iplas
Description: microwave plasma enhanced chemical vapor deposition system |
|
|
FTIR: Fourier transform infrared spectrometer - Bruker Vertex 70
Description: Characterization of molecules and mixtures, vibrational spectra identification. May be performed thin films, powders, liquid state materials research |
|
|
Digital Hand-Tachometer
Description: |
|
|
Solar spectrum simulator
Description: solar spectra simulator for measurement of photovoltaic properties |
|
|
Finder thick coating
Description: |
|
|
IBE: Ion beam etching system - USI-IONIC
Description: ion etching system |
|
|
RIE/PECVD: Reactive ion etching and plasma enhanced chemical vapor deposition system - PlasmaTherm PK-2430
Description: RF reactive ion etching system |
|
|
Diamond like carbon ion beam synthesis system
Description: diamond like carbon ion beam synthesis system |
|
|
Magnetron sputtering tool - LH A700
Description: System is installed in a class ISO5 cleanroom. |
|
|
Laborat mixer. concrete mixtures
Description: |
|
|
Laser engraving and laser cutting machines Winter Lasermax
Description: |
|
|
Concrete Rheometer BTHREOM 789A-06-09bis two 10/10/06
Description: |
|
|
Automatic device Nr.E040 Vic-01 * 15 * 03
Description: |
|
|
CO2, CO meter
Description: |
|
|
Thermal imaging camera
Description: |
|
|
Universal drilling crown REMS 102x420xUNC
Description: |
|
|
Universal drilling crown REMS 52x420xUNC
Description: |
|
|
The unit size of the elastic rebound Proceq Silver Shmidt
Description: |
|
|
Digital scleometer
Description: |
|
|
Thermal anenometer
Description: |
|
|
Bench-mounted router
TF 2200-Set
Description: |
|
|
Airflow meter
Description: |
|
|
Airflow meter
Description: |
|
|
Electronic weighing scales
Description: |
|
|
sound level meterTesto 815
Description: |
|
|
Chamber for the climatic tets
Description: |
|
|
Standard fittings finder
Description: |
|
|
Device to determine the amount of air in the concrete
Description: |
|
|
PRESS P-250
Description: |
|
|
Stereometrical Microscope STEDDY-T
Description: |
|
|
Finder dense reinforcement
Description: |
|
|
Universal drilling crown REMS 152x420xUNC
Description: |
|
|
Cooling cabinet T-25/1
Description: |
|
|
Freezing chamber KHC-2 N10032
Description: |
|
|
Swelling CAMERA BUY-1
Description: |
|
|
Vibration lot Nr.E130 * 4 * 03
Description: |
|
|
vibrating disc mill Pulverisette 9
Description: |
|
|
TAM AIR III calorimeter.
Description: |
|
|
CILAS 1090 LD laser scattering particle size distribution analyzer
Description: |
|
|
Works with KT1000130M HPLC
Description: |
|
|
Sepacore Basic Flash System, Buchi Labortechnik
Description: |
|
|
Meat and fish texture modeling equipment
Description: |
|
|
High performance liquid chromatograph
Description: |
|
|
UV laser - CrystaLaser
Description: UV laser |
|
|
Dot-matrix holographic lithography system
Description: Dot-matrix hologram origination system |
|
|
Analytical balances
Description: |
|
|
CE440 Elemental Analyser
Description: |
|
|
One-handed planer EHL 65 EQ Plus
Description: |
|
|
Benchtop chemical crystallography system XtraLab mini (Rigaku)
Description: |
|
|
Laboratory equipment erudite MklV
Description: |
|
|
Equipment of Dairy Mechanical Processing
Description: |
|
|
Potentiostat/Galvanostat BioLogic SP-150 for fundamental electrochemistry, sensors,
corrosion, energy sources
coatings investigations
Description: |
|
|
UV/VIS spectrophotometer Lambda 25
Description: |
|
|
Blein device Model 1,0290E
Description: |
|
|
The device is sealed character of steel fiber concrete specimens to detect
Description: |
|
|
The test machine compression / bending Pilot 4
Description: |
|
|
Portable moisture meter GMH 3830
Description: |
|
|
Absorption pilot plant ADSA/EV
Description: |
|
|
Roll-to-roll device for application of an adhesion layer - MSM-1
Description: Device for multiplication of optical security marks MSM-1. Fabrication of optical document security intellectual property measures with micro-diffractive elements. The adhesive layer formation on silicone paper and multilayer polymeric film. |
|
|
UV/VIS spectrophotometer Lambda 35
Description: |
|
|
Tensiometer equipped with Vilhelmy plate and DoNuoring systems
Description: |
|
|
Electrodynamic Vibration Excitter systems
Description: |
|
|
Abrasion Resistance Tester IG/ABR/DIN (f. GIULIANI), Nr. 13916
Description: |
|
|
Zeta Potential and Submicron Particle Size Analyzer Beckman Coulter DelsaNano C
Description: |
|
|
Centrifuge Hettich Universal 320 R
Description: |
|
|
Kjeldahl distillation unit, "UKD 130"
Description: The Kjeldahl method is recognized as the most accurate in determining the total nitrogen content of solid and liquid samples. Based on the mineralization of the test organic compound in concentrated sulfuric acid at the boiling point of this acid. The test substance is oxidized to carbon dioxide and water, and the nitrogen in it is released as ammonia, which forms an ammonium salt in the presence of sulfuric acid. |
|
|
Mobile dust extractor CLEANTEX CTL 26E
Description: |
|
|
surfase temperature meter
Description: |
|
|
Hidraulic press GRM-1
Description: |
|
|
Electric drill for columns REMS Picus Basic Pack
Description: |
|
|
Compression press IP-1000
Description: |
|
|
The test machine Toni Technik Nr.132/389
Description: |
|
|
Stand of liquid and solid fuel ash analysis. Analysis is performed acording EU standard
Description: |
|
|
Sound pressure level meter Investigator 2260. The basic system.
Description: |
|
|
Impedance analyzer - Novocontrol Alpha-AK
Description: investigations of electrical properties of dielectric films, testing of fuel cells |
|
|
The shock device
Description: |
|
|
General Physics Laboratory - 247
Description: |
|
|
General Physics Laboratory - 263
Description: |
|
|
Laboratory of Physical Technologies and Microtechnology
Description: |
|
|
General Physics Laboratory - 261
Description: |
|
|
General Physics Laboratory - 235
Description: |
|
|
General Physics Laboratory - 240
Description: |
|
|
Laboratory of Vacuum science and Technique - 252
Description: |
|
|
Thermogravimetric Analyzer Linseis STA PT1600 coupled with mass spectrometer GSD320 Linseis/Pheiffer Vacuum
Description: |
|
|
Equipment for composition and emulsions formation
Description: |
|
|
Pressure losses pilot plant DPA/EV
Description: |
|
|
cooling stand TE6/EV and TE6A/EV
Description: |
|
|
Beer making (brewing) unit
Description: |
|
|
Mettler Toledo T70 potentiometer.
Description: |
|
|
Twin screw extruder KrausMaffei Berstorf GmbH ZE25Rx40D-UTXmi
Description: |
|
|
Thermomechanical analyzator and dielectric spectrometer
Description: |
|
|
DRON-6 powder X-ray diffractometer
Description: |
|
|
Thermogravimeter
Description: |
|
|
HPLC system with UV/VIS and DAD
Description: |
|
|
Meat and fish thermal processing and cooling equipment
Description: |
|
|
Gelchromatografas Malvern Viscotek 270 Dual Detector
Description: |
|
|
Air handling unit with direct-driven supply air and extract air fans.
Description: Air handling unit with direct-driven supply air and extract air fans. |
|
|
Electroacustic spectrometer DT-300
Description: |
|
|
Microwave reactor Anton Paar GmbH - Monowave 300
Description: |
|
|
Hardness tester
Description: |
|
|
Stand of thermo physical characteristics of liquid fuel
Description: |
|
|
Stand of volatility charakteristics analysis
Description: |
|
|
Stand of solid fuel combustion research
Description: |
|
|
Stand of solid biofuel combustion research
Description: |
|
|
Combusion procuts components analyzer "MultilyzerNG``
Description: |
|
|
Rub fastness tester also called VESLIC IG/10/MOD (f. GIULIANI), Nr. 14279
Description: |
|
|
Stand of research for solid and liquid elemental composition
Description: |
|
|
GENERAL PURPOSE STRAIN VIEWER (Ref. S-18)
Description: |
|
|
Luminescence spectrometer FLS980 (Edinburgh instruments)
Description: |
|
|
Three stage cascade impactor "Dekati® PM10"
Description: Three stage cascade impactor "Dekati® PM10" for determining gravimetric mass size distribution of particles. The operating principle of the Dekati® PM10 impactor is based on inertial size classification and gravimetric or chemical analysis of the collected, size classified particle samples. |
|
|
Picoammeter / DC source - Keithley 6487
Description: picoammeter / bias source |
|
|
Hydrothermal processing of materials under high pressure system
Description: |
|
|
Differential scanning calorimeter Perkin Elmer DSC8500
Description: |
|
|
Texture analyser TA.XT plus (Stable Micro System, UK) with load cell, platform and basic software
Description: |
|
|
Fermenters
Description: |
|
|
Preparative chromatography system Sepacore Line C-600
Description: |
|
|
Gas chromatograph with FID detector CLARUS 500
Description: |
|
|
Cyclic voltammetry apparatus (potentiostat), Bio-logic Sas SP-150
Description: |
|
|
Laboratory centrifuge for tubes LMC-3000
Description: |
|
|
Heat transfer pilot plant with tube-in-tube, shell-and-tube and plate exchangers SCTA/EV
Description: |
|
|
FT-IR spectrometer with RAMAN module
Description: |
|
|
Heating Circulators, Julabo HE-4
Description: |
|
|
Spectrofluorimeter for measuring steady state luminescence spectra and quantum yields in the UV – NIR spectral range with single photon counting sensitivity. Spectrometer for measuring fluorescence lifetimes spanning the range from picoseconds to microseconds based on the technique of time correlated single photon counting, Edinburgh Instruments FL920
Description: |
|
|
Differential scanning calorimeter DSC214Polyma
Description: |
|
|
Liquid-liquid extraction pilot plant LLA/EV
Description: |
|
|
FT-IR spektrometer
Description: |
|
|
AFRICA (Automated Flow Reaction Incubation Control Apparatus) with FLLEX and PCM.
Description: |
|
|
Glass oven Kugelrohr with accessories
Description: |
|
|
Meat and fish products formation equipment
Description: |
|
|
Hydrothermal processing of materials under high pressure system
Description: |
|
|
The hydraulic compression testing machine
Description: |
|
|
Equipment of Dairy Thermal Treatment in Ultra High Temperature
Description: |
|
|
X-ray fluorescence spectrometer TIGER S 8
Description: |
|
|
Turbo molecular vacuum system (end vacuum ~10 -7 mbar)
Description: |
|
|
microscope
Description: |
|
|
Dynamic microhardness meter - Fischerscope HM 2000S
Description: dynamic microhardness meter |
|
|
Thermal microimprint device
Description: Formation of micro-relief on polymer surface |
|
|
E-beam evaporator - YBH-71D3
Description: vacuum evaporation unit |
|
|
Modulus of elasticity and deformation measure
Description: |
|
|
Drying oven SNOL 200/200
Description: |
|
|
Humidity measuring instrument Moisture Master Pro
Description: |
|
|
Blein device
Description: |
|
|
Vibration lot CMŽ-539
Description: |
|
|
Tension machine P -50
Description: |
|
|
Tension press P -50
Description: |
|
|
Refrigeration unit "BITZER" 2Cl 3.2
Description: |
|
|
Wardrobe for drying SNOL58/350
Description: |
|
|
Press GRM-2A
Description: |
|
|
PRESS MC-500
Description: |
|
|
Humidity / temperature meter
Description: |
|
|
Flow velocity, temperature meter
Description: |
|
|
Meter digital resistance RESI
Description: |
|
|
Polymer characterization system - molecular sieve chromatograh
Description: |
|
|
UV Vis spectrometer Lambda 35
Description: |
|
|
HPLC system
Description: |
|
|
Thermal Analyser Perkin Elmer TGA4000
Description: |
|
|
Ultrasound generator K8-1
Description: |
|
|
Mass detector and liquid chromatography system
Description: |
|
|
Thermal eveporation system integrated into the glove-box
Description: |
|
|
System SPECTRUM GX 2000 RAMAN Nr.68891, HATR ACCESSORY FOR SPECTRUM GX
Description: |
|
|
MFT/3 Multifunction Table
Description: |
|
|
Hot wire cutter THERMOCUT 230/E
Description: Hot wire cutter. 230V, 50/60Hz. Transformer secondary max. 10V, 1A. Cutting wire temperature with 0.2mm diameter is variable between approx. 100 and 200 °C. Weight approx. 3kg. Insulated to class 2 requirements, base with 390 x 280mm table. |
|
|
Zwick Roell Materials Testing Machine BDO-SBO.5TH
Description: |
|
|
Optical Motion Capture system for measurements and analysis of movements CONTEMPLAS (two digital videocameras, software for measurements and data processing)
Description: |
|
|
The data collection and vibration measuring device VIBROTEST 60
Description: |
|
|
Water vapour absorption test apparatus STD 478 (f. SATRA), Nr. 478-6-0512
Description: |
|
|
The portable measurement and data processing unit Pulse 3560
Description: |
|
|
Products of combustions gas components analyzer
Description: |
|
|
Technological Equipment of Cheese Small-scale Production
Description: |
|
|
Friction/peel tester
Description: |
|
|
Hardness tester
Description: |
|
|
Device of determination of paper (paperboard) surface smoothness
Description: |
|
|
Elcometer GG013
Description: |
|
|
Roll-to-roll thermal microimprint device
Description: Fabrication of optical document security intellectual property measures with micro-diffractive elements. |
|
|
Ultrasonic tester for concrete researches
Description: |
|
|
Thermal imaging camera
Description: |
|
|
Vacuum pump GVP 140
Description: |
|
|
Device for cheking depreciation (abrasion) LKI -3
Description: |
|
|
Surface roughness measurement device -
Description: Device for roughness measurement of mechanical surfaces |
|
|
Fiber optic spectrometer & light source - Avantes AvaSpec-2048 & AvaLight-DHc
Description: Reflection, transmission, absorption measurements in UV-VIS spectral range. Applied in refractive index kinetics measurement stand |
|
|
Langmuir-Blodgett trough
Description: Langmuir-Blodgett trough and control system. Langmuir-Blodgett trough is used to deposit single or multiple monolayers on a solid substrate. |
|
|
NanoScan SMPS nanoparticle sizer Model 3910
Description: NanoScan SMPS nanoparticle sizer 3910. This portable, real-time instrument combines the NanoScan SMPS and the Optical Particle Sizer to quickly and accurately measure particles ranging three orders of size magnitude from 10 nanometers to 10 micrometers. |
|
|
Portable mobile system Noraxon for measurement of biomechanical parameters. Amplifier with Bluetooth interface with PC where software for data acquisition and processing is installed and a set of transducers
Description: |
|
|
Stand of oil compostion analysis (for study process)
Description: |
|
|
Universal optical spectroscopy and laser microfabrication system
Description: Universal optical spectroscopy and laser microfabrications system |
|
|
Netzsch 409 PC Luxx simultaneous thermal analysis instrument with ceramic sample handlers and crucibles of Pt-Rh.
Description: |
|
|
Dilatometer L75H1600C
Description: |
|
|
X-ray diffractometer for powder and layers ADVANCE D 8
Description: |
|
|
optical microscope Axiolmager Z2
Description: |
|
|
Solid-liquid extraction pilot plant SLA/EV
Description: |
|
|
FT-IR spectrometry system
Description: |
|
|
Liophylisator SPI Industries Sentry 2.0
Description: |
|
|
Two component mixer - Dopag Micro Mix E
Description: Used for mixing polydimethysiloxane (PDMS) monomer and its curing agent at a ratio 10:1. Single-use static mixers are used to mix and dispense the components. |
|
|
Diferential scanning calorimeter
Description: |
|
|
Photoelectron spectrometer
Description: |
|
|
Spectrophotometer "Spectronic GENESYS 8"
Description: The spectrophotometric test determines the light absorption of a substance as a function of wavelength. It is most commonly used to determine the light absorption of various liquids, solutions and transparent solids (as the concentration of coloring compounds in a material changes, so does the light absorption). The material is illuminated with light of a certain wavelength (190-1100 nm) and the intensity of light transmitted through the layer of analyte is measured. |
|
|
Indoor air quality monitor "Aeroqual IQM 60"
Description: An integrated concentration meter for gaseous pollutants and particles is designed to monitor air quality parameters. Determination of concentrations of carbon monoxide, carbon dioxide, nitrogen dioxide, ozone, volatile organic compounds, aerosol particles in ambient and indoor air. The air flow is distributed and drawn through different measurement cells and the measured values are recorded (measurement interval 2 min). |
|
|
Wearable device for monitoring human physical activity parameters MinimaxX (model v2.OPCB)
Description: |
|
|
Dekati Electrical Low Pressure Impactor ELPI+™
Description: ELPI+™ enables measurement of real-time particle size distribution and concentration in the size range of 6 nm – 10 µm with 10 Hz sampling rate. The ELPI+™ features include real-time stand-alone operation, wide particle size range and robust structure for operation even in harsh conditions. The use of impactor technology enables post-measurement chemical analysis of size classified particles. In addition, the ELPI+™ can be used for real-time particle charge distribution and gravimetric impactor measurements. All these features enable the use of the ELPI+™ instrument in a wide range of particle measurement applications. |
|
|
Four-point probe measurement system
Description: Four-point probe measurement system For measurement of sheet resistance and electrical conductivity |
|
|
Centrifuge - Colo LACE16
Description: Centrifuge |
|
|
AFM: Scanning probe microscopy system - JPK NanoWizard 3
Description: The JPK NanoWizard 3 scanning probe microscopy system is used for measuring surface topography and the mechanical, electrical, and magnetic properties of materials in both air and fluids. It is suitable for solids, polymers, biological samples, and molecular characterization, as well as for nanomanipulation and nanolithography. This system supports the development and research of advanced new materials and thin films, and it aids in the control of technological processes at the nanoscale. The system is installed in a class ISO5 cleanroom. |
|
|
Solid-Liquid Extractor
Description: |
|
|
Spiral mixers (DIOSNA SP 24 F
Description: |
|
|
Platilab 110 H
Description: |
|
|
Works with KT1000131M HPLC-MS
Description: |
|
|
Acoustic spectrophotometer
Description: |
|
|
Particle size analyzer
Description: |
|
|
Baking oven MIWE Condo
Description: |
|
|
Spectrophotometer
Description: |
|
|
Thermo - chamber MIWE
Description: |
|
|
Dough forming mashine
Description: |
|
|
Vacuum-packaging machine HEFESUS Atchena SLB
Description: |
|
|
Raman scattering spectrometer - Renishaw inVia
Description: Setup with the confocal micro-Raman optical system is devoted for Raman scattering spectra registration. Raman scattering spectroscopy can be used for the analysis of bulk materials, thin layers, powder and solutions. Unknown materials can be identified using the 8000 spectra containing spectral library. Measurements of various carbon allotropes (diamond-type carbon, graphene, graphene oxide), organic and inorganic materials, surface-enhanced Raman scattering measurements using silver or gold nanoparticles are performed. |
|
|
Fermentation Kit- BioFlo 110 M1273-1162
Description: |
|
|
Rotary evaporator - Scilogex RE100-Pro
Description: Rotary evaporators are mainly used in pharmaceutical, chemical and biopharmaceutical industries for efficient and gentle removal of solvents from samples by evaporation, and solvent recovery. Its advantages come from the fact that rotation of the flask artificially increases the surface area of the solvent and effectively suppresses bumping while decreased pressure facilitates rapid solvent removal at low temperatures. Evaporator has automated jacks and advanced temperature control features. |
|
|
Infrared thermometer - UNI-T UT302D+
Description: Infrared thermometer |
|
|
Spectroscopic ellipsometer - Semilab GES5E
Description: Device is feasible to analyse optical constants (k(λ), n(λ)), thickness of thin isotropic and anisotropic transparent and non-transparent layers on isotropic and anisotropic transparent and non-transparent substrates. It can be also used for evaluations of periodical structures (scatterometry) and absorption kinetics in liquids. |
|
|
Glossmeter - Elcometer 480
Description: Gloss meter Elcometer 480, 3 angles. Measures and records gloss, reflection and haze measurements on a variety of materials including paint, plastic, ceramic or metal. |
|
|
Spin coater and hotplate - SPS Polos 200
Description: The SPS Polos 200 is a high-performance spin-coater designed for application of thin films onto substrates. It features customizable spin speeds and acceleration profiles, allows defining multiple process steps. The system accommodates a variety of substrates and coating materials, but is mostly used for spin coating resists for photolithography or electron beam lithography. The system is installed in a class ISO5 cleanroom. |
|
|
Spin coating system - Chemat KW-4A
Description: KW-4A is a compact and easy-to-use spin coater for precise and uniform deposition of thin films and coatings. Its rugged, vibration-free and portable design makes it a versatile tool. A two-stage spin process allows dispensing at low speed and homogenizing the coating at high speed. The KW-4A spin coater can be used to deposit metal oxide thin films, polymer coatings and metal organic thin films. This product features a Teflon-coated stainless steel coating bowl. |
|
|
Drop shape analyzer - Kruss DSA25
Description: - |
|
|
Beam profiler - DataRay WinCamD-LCM
Description: The WinCamD-LCM is a laser beam profiling device from DataRay designed for precise measurement of laser beam diameter, profile, and intensity distribution. It features a high dynamic range CMOS sensor, capable of accurately measuring beams across a wide range from UV to IR. The WinCamD-LCM also comes with intuitive software that makes it easy to analyze and visualize laser beam properties. |
|
|
Mobile multi-channel electronic PC measurement unit for parallel, dynamic measurement data acquisition using a computer for the measurement of various mechanical parameters
Description: |
|
