System solutions and expertise of human face tracking and recognition

Description:
Using computer vision algorithms and expertise human faces identification and detection methods are created.

Research on corporate social reporting volume and quality of information

Description:
Research on corporate social reporting volume and quality of information

Study of innovative time-based cost accounting system implementation

Description:
Study of innovative time-based cost accounting system implementation

Study of corporate social responsibility and accountability implementation

Description:
Study of corporate social responsibility and accountability implementation

Applied research of parking sensors and systems

Description:
All places of mass gathering, intense nodes have an increased risk for potential emergency situations, which is solved by traffic flow management system. Research for the sensors and algorithms for detection of vehicles, their size, direction of travel and speed identification.

Technical feasibility studies of apliement of interactive sensoring systems

Description:
All modern intelligent electronic systems are based on microcontrollers and sensors that “sense” the environment. Managed (interactive) temperature, humidity, magnetic field, position sensors are developed and applied.

Technical feasibility studies of electronic systems apliement for medical devices monitoring and management

Description:
Modern medical practices using large amounts of electronic equipment produced by different manufacturers at different times, so there are hardware integration and monitoring problems. Carried out a range of electronic equipment into a single system for feasibility studies.

Development of measurement systems, automation of calibration and verification procedures (hardware and software)

Description:
Hardware and software solutions of different measurement systems are proposed. If the measured object is in the legal metrology field, the calibration and verification techniques are developed and validated, as well as hardware and software for automated calibration and verification.

Car brake quality control system

Description:
We design automatic mechatronic systems for brake traction control, as well as for delay time assessment in the pneumatic brake systems in accordance with EU regulations.

Smart lighting control system with long-range RF encrypted communication nodes

Description:
Smart remote lighting control devices, the parameters measurement and status monitoring systems are developed, which individualy to the required profile and adaptively from external lighting level are controlling light sources through the Internet network, and assess the cost of electricity in tracking their history, which further seeks to ensure: 1. continuous lighting source state control and reliability of the assessment process; 2. The function of analysis to power supply matching set value and automatic alarm notification when generated power changes; 3. The electricity supplier's recommendations tracking option; 4. The confidence indicator forming option; 5. The synchronized distribution functionality for individual indoor light sources option; 6. authenticated management access and wireless encrypted command option; 7. The option of changing the encryption key; 8. The increasing the set switch-off phase, and a source extension of working time; 9. The power control source transfer characteristics straightening option; 10. The use of the operating mode based on a positive use history.

Accounting system for electronic component resource control (software tool)

Description:
The development of software tools, testing and adjustment. Purchase and Sales modules consist of specialized data bases. The system provides a variety of data (eg., components and raw materials to the specifications for electronic products, suppliers/customers lists, and so on.). Procurement module generates unique order number, give the minimum possible to order specific components, the minimum package size, price, payment terms, delivery times and so on to the customer. Specific functions of the system and realized sales module: the list of customers, orders and settlement with the company information, and so on.

Inovative maintenance system for vehicle park (software tool)

Description:
The service and its description is correlated with the service, “Innovative maintenance system for vehicle park (technical feasibility study)”. Technical feasibility study establishes requirements for vehicle maintenance system and criteria for evaluation of the technical condition of the car. Software created by the Windows operating system for computers is obtained thanks to various real-time and reference information about the vehicle's operating situation, just after entering the vehicle license plate number (created through the graphical user interface (Web)): technical passport; data on the movement of the vehicle (speed of movement, the location of the movement history); consumables and spare parts replacement necessity; warning function of the necessary technical maintenance work; Various reports on the movement route and speed, technical maintenance and service operations.

Optimization and optimal control of technological processes (chemical, biochemical, food production, energetics, etc.)

Description:
Management systems which realize optimal processes are researched and designed using experiment theories, processes mathematical modelling and optimization techniques and continuous process parameters and modes of optimization tasks criteria research are carried out.

Contactless measurement of obect parameters from visual information

Description:
Contactless object parameter measurement using visual information is provided from two-dimensional images, or videos, or three-dimensional images obtained by Kinect or other similar types of sensors. Identification from the two-dimensional images can be used for detection of surface defects (cracks in the asphalt, aircraft surface irregularities, etc.). Using an additional light source and the design of the known forms of light signal when recording in the facilities, according to the received video footage template, light distortions identify objects dimensions, defects or discrepancies to the template. The possible result - the scientific feasibility study on the creation of an algorithm or a trial version of the program. Possible fields of application: a conveyor manufacturing production control, aircraft, road inspection and defect detection, multimedia or the like.

Modelling, Optimization and Control of Biotechnological processes

Description:
Using basic knowledge, experiments and expertise mathematical models of processes are being developed. Models are adapted to process optimization, monitoring, control and error analysis.

Development of effective power supplies and their control methods for high power LEDs

Description:
High-power LEDs for lighting and power supply efficiency tests, the development of set parameters controlled LED power supply. Infrared LED transmission control methods and implementation. LED power supply design, computer simulation. Layout creation, experimental study, analysis of the results. Prototype.

Development, research and feasability study in the field of high performance embedded systems

Description:
Development and research of the high-speed electronic systems, based on programmable logic (FPGAs) and digital signal processors (DSP). Systems for digital modulations, measurement and diagnostic signal processing and etc.

Object detection and tracking from 2D or 3D images

Description:
Using visual information and artificial intelligence methods for identification of objects from two-dimensional or three-dimensional paintings. Object detection image according to common traits - a man, a cat, a dog, a car, numbers, letters, or the like. It is also possible to detect moving objects such as a specific person or object recognition. Recognition of weather phenomena - rain, snow, etc. The possible result - the scientific feasibility study on the creation of an algorithm or a trial version of the program. Possible applications include: security monitoring system to accompany the special services, products or secondary materials separation, etc.

Design, development, feasibility studies of the data and signal acquisition systems

Description:
Signal collection systems / nodes, consultations. Filters, Attenuators operated amplifiers, multi-channel data collection, and transmission. Signal collection system - an integral part of flexible manufacturing technologies. Used both for designing, debugging stage, when it is necessary to evaluate the properties of the prototype and the actual operation, when it is necessary to control and manage the process (eg.: radio / navigation system ultrasound; high dynamic range signals an alarm and recording system for bulk liquid products accounting system; physical material parameters of the measuring system defect detection system). Our projects include: a radio navigation system; Ultrasound navigation system; high dynamic range signals an alarm and recording system.

Specialized embedded systems for mechatronics products (machinery, equipment, control of technological processes, quality control systems). Prototypes and production documentation.

Description:
An embedded system, which is the main part of a microprocessor or microcontroller, is a part of many products. Creating such systems ranging from establishing a concept to prototype, including software and hardware. Many years of experience in the development and implementation of such systems in the EU countries.

Expert forecast of solutions (project implementation) efficiency

Description:
The application of situational management methods based on expert evaluation, carried out the installation of electronic technology efficiency rating forecasts. A specialist intelligence is used as a measuring measure. Carry out expert evaluations collection, primary processing and aggregation, evaluating each expert's level of expertise. Calculate electronic technology complex installation efficiency.

Public transport service quality evaluation based on vehicle dynamic characteristics tests

Description:
Passenger transportation quality assessment based on driving time of dynamic characteristics measurements. Dynamic performance measurements using accelerometers, gyroscopes, magnetometers and GPS sensors. Measured characteristics are processed and used for driving quality characterizing feature extraction and transport quality index determination.

Control system for efficient operation and maintenance of residential building (software tool)

Description:
The service and its description is correlated with the service "Control system for residential buildings for operation and maintenance (technical feasibility study). Technical feasibility study addresses requirements for innovative residential building maintenance control system. Through a Web interface (accessible via the company's web page) remote users can declare various home systems induction counters, register faults. The system provides building maintenance administrator relevant data relating to the operation of the building. According to the failure priority system makes troubleshooting schedule, generates warning (alarm) functions for critical failures and various reminders, the required operational functions, eg., the state of building constructions (walls, foundation and roof) assessment, home systems (electrical, thermal point , hydraulic and others.) testing and so on. Generates various statistical reports. By default, the ability to easily update specialized databases is implemented.

Control system for efficient operation and maintenance of residential building (study)

Description:
The service and its description is correlated with the service "Control system for residential buildings for operation and maintenance (technical feasibility study). Technical feasibility study addresses requirements for innovative residential building maintenance control system. Through a Web interface (accessible via the company's web page) remote users can declare various home systems induction counters, register faults. The system provides building maintenance administrator relevant data relating to the operation of the building. According to the failure priority system makes troubleshooting schedule, generates warning (alarm) functions for critical failures and various reminders, the required operational functions, eg., the state of building constructions (walls, foundation and roof) assessment, home systems (electrical, thermal point , hydraulic and others.) testing and so on. Generates various statistical reports. By default, the ability to easily update specialized databases is implemented.

Insulated heat distribution pipes monitoring systems

Description:
Modern heating tracks have a low thermal conductivity heat insulating sheath, they are installed in trenches without additional waterproofing or mechanical protection components. During operation, forces act due to the deformation, depending on the length of the track and the DH changes in temperature, hydraulic shock, resulting outer casing of polyethylene mechanical damage and breach of the insulation layer. Developing methods and tools to ensure operational defect nature and location, as well as the possible heat loss assessment.

Enhancement of effectiveness of modern high power LED lighting and LED power supplies

Description:
Contemporary high-power LEDs for lighting and their power sources parameters testing and performance enhancement techniques. Using a higher frequency power conversion power LED lighting feeding supplies improves the important parameters such as a decrease in the dimensions of weight and cost, but bring new challenges - declining power supply efficiency, there is an efficient heat removal, generated noise and interference suppression problems and etc. For the design of the above sources, it is important to find optimal solutions to the task at set conditions.

Technical features and solutions to design access network and provide services in the regional frequency band (the stydy of technical-technological feasibilities)

Description:
Technical-technological feasibility study for the regional frequency band 3670-3735 MHz. Effective utilization of the available frequency range, the current RAIN infrastructure integration and solutions are highly relevant to technological development issues. The result of technical and technological feasibility study - the potential and ensuring the requirements for manufacturer technology selection, in the frequency referenced and the establishment of the proposed solutions for access networks and services for this network development plan.

Telecommunications and computer-systems design, programming and development (feasibility studies, experimental development, research)

Description:
Research is in the topic of cyber security. However, attention is paid to cyber safety, prevention of possible attacks and forecasting issues. It addresses the challenges associated with the device identification using radio frequency identification technology. Radio electronic unmanned aircraft safety issues are solved. Process automation, computerized systems development, POSIX systems programming are ongoing.

Development of traffic operational adjustment (control) methods and software

Description:
Transport flow modelling and rapid flow adjustment methods, using a variety of algorithms and tools for assessing different types of transport, traffic conditions and road types.

Research and development, feasibility studies, consultancies on sonoporation systems.

Description:
Sonoporation ultrasonic generator/system for drug/gene incorporation into living cells. With sonoporation help cell wall permeability can be briefly increased, thus enabling of the insert of DNA or chemicals to the cells inside. Many years of experience in electronics design and ultrasound studies. Experience in ultrasonic signal processing methods to quality assessment of sonoporation.

Research and development, feasibility studies, consultancies on ultrasonic transducers/arrays quality validation systems.

Description:
Ultrasonic transducers/pixel quality verification is particularly relevant in medical diagnostic equipment. Quality is defined by the electric/acoustic performance. Many years of experience in electronics design and ultrasound studies: an ultrasonic pulse generator excitation; making low noise amplifier; signals collection systems. Experience in signal processing methods designed for accurate propagation time, speed, damping and other parameters for measurement. Our projects include: ultrasonic liquid flow measurement, ultrasonic thickness measurement of composite materials visualization system, the polymerization state measurement.

Research and development of smart biomedical ultrasonic systems

Description:
Ultrasound in medicine can be used for therapeutic or diagnostic purposes. Electronics quality is important in terms of effectiveness, safety and electromagnetic compatibility for the certification of such systems. Electronics design, project quality/performance assessment, electromagnetic compatibility analysis, consultations. Many years of experience in electronics design and ultrasound studies: an ultrasonic pulse generator excitation; making low noise amplifier; signals collection systems. Experience in signal processing method is designed for accurate propagation time, speed, damping and other parameters for measurement. Our projects include: ultrasonic liquid flow measurement, ultrasonic thickness measurement of composite materials visualization system, the polymerization state measurement.

Human gesture recognition research

Description:
Human gestures recognition and the practical use of the man - machine control systems development and research. It is also possible to control characters, fixed postures or gestures dynamic tests. Recognition Using Hidden Markov chain model, random trees sets classification, artificial neural networks, etc. The best method or combination of methods for selection by the identification of qualitative parameters. The possible result - the scientific feasibility study on the creation of an algorithm or a trial version of the program. Possible fields of application: mobile robot control, industrial control devices or applications management and so on.

Design, construction and research of charging stations for electric vehiles ('SmartChargeBox')

Description:
EVSE device designed to charge electric vehicle batteries according to IEC 62196 standard.

System for remote instalation control of the fiber-optic access networks (study)

Description:
System for remote instalation control of the fiber-optic access networks (study).

Electronic systems simulation, design and research

Description:
While developing modern electronic systems there is a need to model, simulate them with specialized software. This allows to test the capabilities of such systems. After systems implementation a variety of electronic properties such as efficiency and so on can be explored.

System for remote control of the fiber-optic access networks (software tool)

Description:
System for remote control of the fiber-optic access networks (software tool)

Mobile objects remote control system (software tool)

Description:
Depending on the observed object, it can be very different systems, such as heavy vehicles operating or human condition monitoring system. The service and its description is correlated with the service provided by "Remote control of mobile objects (technical feasibility study)”. Services rendered result - will create a software tool that will allow to remotely (via the Web) track objects according to the data collected from the sensory systems (implemented data collection, remote transmission and display). Also, this tool will realize some of the observed object management functions.

R

Description:
null

R

Description:
null

Thin metal layers forming vapor deposition method

Description:
Thermally vacuum evaporated thin Cu, Ti, Cr, Al, etc. films, thickness 10-300 nm

Silicon nitride coatings

Description:
Silicon nitride coatings from plazma using ammonia NH4 and silane SiH4 gases. We can get different hardness and electrical conductivity coatings.

Materials and structural elements of strength, rigidity and durability research

Description:
Research of mechanical characteristics enables to solve product or structural element suitability. In recent years were offered the investigation of strength characteristics of plastics, composites and other materials (steel, etc.).

Smart, energy saving technologies research, development and feasibility studies

Description:
Smart energy-saving technologies research and technological development, feasibility studies. Studies of solid-state lighting, wiring and network diagnostics, monitoring and accounting systems for the application in the energy efficiency.

Development and investigation of decission support systems for technological process control

Description:
A variety of technological and financial management processes required for decision support systems development based on advanced technologies for the development of such systems ranging from machine learning as well as expert knowledge formalization.

Design and research of ultralow power wireless monitoring and control systems

Description:
The biggest problem of wireless monitoring and management systems is a limited battery life. There is a need to change the batteries. It's expensive, and sometimes impossible. Intelligent, interactive Ultra Low Power sensors and control systems are created.

Applied research of medical devices monitoring and management

Description:
Modern medical practices using large amounts of electronic equipment produced by different manufacturers at different times, so there are hardware integration and monitoring problems. Creating a user-friendly interface to facilitate the work of doctors and ensure patient safety.

Technical feasibility studies of wireless systems for monitoring and control

Description:
Wireless GSM-based operating units have the disadvantage that the batteries serve for a limited time. Intelligent, interactive Ultra Low Power Sensors and control systems operating up to 100 days without charging the battery are being created.

Measurement parameters of LED bulbs and reaearch of energy efficienty

Description:
We can carry out the LED lamps or similar devices parameters and service life tests, electromagnetic compatibility control in accordance with the approved methodology. Energy efficiency, light aging and fault identification causes or reliability enhancement studies and make recommendations.

Analog Fuel Level Sensor

Description:


APPLICATION AREAS:
Road transport, rail transport, maritime transport. Trade and storage of oil products

YEAR OF INVENTION:
2014

FEATURES, TECHNICAL SPECIFICATIONS:
Analog, fuel level sensor EFLS-A-XXX (“XXX” marking is described in the table below), hereinafter referred to as the “sensor”, detects fuel level in the tank of a motor vehicle or motor fuel storage/transportation tank, and converts information about the current level to output voltage in the range of 0.2V…9V. This voltage can be converted to a digital form by an external device (ECU, data logger, or telematics module). The connection wires are protected by a metal-plastic flexible corrugated tube. Sensor suits the requirements of: EU Dir. 72/245 up to 2006/ 96; EN61326; EN590; EN228-1993

NOVELTY:
A modern elemental (electronic) base applied to a specific product

TECHNOLOGICAL READINESS LEVEL:
Final product (in sale).

The study of corporate social reporting disclosure in terms of the needs of stakeholders

Description:
The study of corporate social reporting disclosure in terms of the needs of stakeholders

value chain, cost manahement, activity based costing

Description:
value chain, cost manahement, activity based costing

Testing and metrological evaluation of electronics and measurement systems

Description:
Software tests of measuring instruments and measuring systems, conformity assessment for WELMEC 7.2 requirements.

Development, research and feasability study in the field of IoT networks for precission agriculture, energy resources consumption and parameters monitoring

Description:
The development and research of Internet Of Things systems for precision agriculture, energy accounting and process parameters monitoring. Sensor and actuator connection to the Internet of Things (IOT).

Design and research of automated soil properties investigation systems

Description:
When designing the foundations of the buildings the nature of the ground must be identified, soil, taken from a borehole mechanical characteristics examined. Some investigations (eg. compression test) take up to 2 days. Developed sensors, controllers and hydraulic system allows automated test simultaneously perform several different studies. The human factor is thus eliminated, the report promptly prepared, tests price falls

An analysis of possibilities for enterprise activity optimization by means of LEAN system (study)

Description:
The service and its description is correlated with the service, "the company's economic performance optimization options analysis by the LEAN system (technical feasibility study). Preparation of feasibility studies, where the principles of Lean System for enterprise business process optimization. Software tool is a modular structure. A multi-purpose modules consists of specialized databases, presenting the user a variety of data. Various statistical reports are generated.

Development, research and feasability study in the field of energy efficient electronic systems

Description:
Design and research of specialized energy-efficient electronic systems, including those powered by batteries and wireless networks for measurement, data collection, accounting, technical diagnostic systems.

Remote mobile unit control system (study).

Description:
This service is correlated with “Mobile objects remote control system (software tool)”. Services rendered result - a technical feasibility study, evaluating a variety of mobile objects (vehicles operating or the patient's) condition monitoring capabilities in real time, control algorithms and possible control measures (technological solutions).

Control system for enterprise activity according to the LEAN system (software tool)

Description:
The service and its description is correlated with the service, "the company's economic performance optimization options analysis by the LEAN system (technical feasibility study). Preparation of feasibility studies, where the principles of Lean System for enterprise business process optimization. Software tool is a modular structure. A multi-purpose modules consists of specialized databases, presenting the user a variety of data. Various statistical reports are generated.

Applied research of interactive sensoring systems

Description:
All modern intelligent electronic systems are based on microcontrollers and sensors that “sense” the environment. Managed (interactive) temperature, humidity, magnetic field, position sensors are developed and applied.

Applied research of automated CPT systems

Description:
Designing of high-rise buildings foundations not only the nature of the ground must be identified. We developed systems for static earth sensing, twinning pressure and soil stratigraphy.

Research of dependency and causality in time series

Description:
Dependency and causality analysis are related in the sense that both deal with relationships among variables. The main difference: the observed dependency can be linear or nonlinear, positive or negative but it cannot identify a cause-and-effect relationship, whereas the causality analysis allows to achieve that purpose. The research can be followed to determine the multiple causality, conjectural causality, mutual effect and influence of time factor. The analysis of relationship among macro indicators and stock index could be as an example of the research. Potential customers of this service – business units that see this analysis relevant for the decision making, in forecasting or scenario analysis.

Transfer of 3D EBL fabricated microstructures from polymer to quartz and silicon

Description:
Reactive-ion etching (RIE) is a type of dry etching which has different characteristics than wet etching. RIE uses chemically reactive plasma to remove material deposited on wafers. The plasma is generated under low pressure (vacuum) by an electromagnetic field. High-energy ions from the plasma attack the wafer surface and react with it. Reactive ion etching (RIE) - This is for plasma etching technology used in micro production. Technical specifications: etched with materials: Si, SiO 2 and SiN, etching gas: CF4, CHF3 and SF6, selectivity photoresist :> 02:01, selectivity Si layer:> 02:01.

Investigation of the surfaces of various materials

Description:
Atomic-force microscopy (AFM) or scanning-force microscopy (SFM) is a type of scanning probe microscopy (SPM), with demonstrated resolution on the order of fractions of a nanometer, more than 1000 times better than the optical diffraction limit. The information is gathered by "feeling" or "touching" the surface with a mechanical probe. Technical specifications: maximum scanned area of 110x110 μm, the largest surface height of 22 μm, vertical resolution Z 0.34 nm, horizontal XY resolution of 1.4 nm.

The research on employee satisfaction and loyalty for organization

Description:
The successful performance of modern organization is influenced by the effective human resource management that is based on mutual trust between employees and managers and the match of their interests. Job satisfaction is the guarantee for employee good feelings, psychological state and their positive attitudes towards organization. The commitment or loyalty for enterprise is related to the satisfaction of employees' needs and the balance between employer's and employees interests. The experience of Lithuanian enterprises proves that there is one fifth of loyal employees, and more than one third of them think of changing their workplace or work activities. Similarly, insufficient attention to employees' welfare and their needs determines the increasing staff turnover and weakens the competitive advantages of organization. Aiming to overcome the mentioned consequences, it is proposed to organizations to identify the factors that influence employee job satisfaction and to analyse the possibilities to satisfy employees' needs. The result of research is the study on possibilities for increasing employees' job satisfaction and their loyalty for organization.

Surface morphology and structure

Description:
A scanning electron microscope (SEM) is a type of electron microscope that produces images of a sample by scanning it with a focused beam of electrons. The electrons interact with atoms in the sample, producing various signals that contain information about the sample's surface topography and composition. The electron beam is generally scanned in a raster scan pattern, and the beam's position is combined with the detected signal to produce an image.

Service of electron beam lithography, laser, ultrasound and other technologies

Description:
Photo template manufacture using electron beam lithography. Structure scale from 100 nm. Micro and nano structures forming on conductive surfaces.

Material control of chemical composition and partial composites analysis

Description:
Energy-dispersive X-ray spectroscopy (EDS or EDX) is an analytical technique used for the elemental analysis or chemical characterization of a sample. It relies on an interaction of some source of X-ray excitation and a sample. Its characterization capabilities are due in large part to the fundamental principle that each element has a unique atomic structure allowing unique set of peaks on its X-ray emission spectrum. To stimulate the emission of characteristic X-rays from a specimen, a high-energy beam of charged particles such as electrons or protons, or a beam of X-rays, is focused into the sample being studied. Technical specifications: Detector - SDD (Silicon Drift Detector), energy resolution - 133, 129 and 127 eV (Mn Ka) 1 100 000 cps Calculation stretch - 1 000 000. or more active area - 10 mm2 detectable elements - from boron (5) to americium (95) or better.

Monitoring systems, technical information systems

Description:
The data about technological processes collection, transmission and remote imaging hardware and software. Enterprise document management system with electronic signatures, automatic transmission of the document formed entity specified functions.

Development of diagnostic methods, algorithms, and programs for mechanical and electromechanical devices functioning.

Description:
Equipment or its individual parts diagnostic techniques, methods and algorithms are developed for device functionality increase. These algorithms based software implementations allow to extend equipment life and ensure the safety and operation in compliance to technical standards.

Modelling of Continous and Discrete processes

Description:
Discrete and continuous processes in production mathematical models, using classical and modern methods and algorithms. These models realization, ongoing simulation is performed using Matlab simulation packages, Centaurus and IEC 61131-compliant controller programming software packages

Smart mixtures production control systems for building materials production

Description:
Creating adaptive concrete and asphalt mixtures production management systems (hardware and software) that performs automatic liquid chemical additives, fillers and inert materials dosing stabilizing the W/C ratio. Experience with systems of 14 manufacturing companies.

Formalization and solution of process optimization tasks

Description:
Setting optimization goals and opportunities, defining hardware and software tools to realize these goals. Objectives pursued - energy and economic efficiency, safety and ecology. Applying various optimization techniques and criteria by mathematical modelling.

Radio network coverage calculation, site determination, main radio parameters calculation

Description:
During the intensive development of mobile radio network quality coverages rating, station construction sites selection and design, the most important communication parameter calculations or measurements is relevant. The calculations are carried out using GIS tools, for measurements, if there is a functioning network - TEMS or similar specialized tools.

Specialized applications creation (Feasibility Study)

Description:
Opportunities to create a user-friendly application that will help users of smartphones to automatically and correctly make certain settings on your smartphone, to timely activate defined functions. Smart phone user does not need to know phone configuration features, answers to the interactive questions are enough. The study will be carried out in the most popular smartphone operating systems (Android, iOS, Windows) and their composite analysis software modules as well as the specific functionality of the activation of the program code of the Android OS environments.

WiFi access cyber sequrity control system

Description:
The service and its description is correlated with “WiFi access cyber security research”. Expected results of the project - will create about 120-150 p. technical feasibility study, which will be submitted to the WiFi device identification system for architectural concept of cyber threats reduction, based on radio frequency identification traces of the application form requirements for WiFi access control system and the establishment of such a system specification. There will also be a universal method for the Wi-Fi equipment identification automation, providing access to a wireless Wi-Fi network, and the methodology to obtain the result is a real WiFi network that will be used to formulate the requirements to prototype WiFi network access control system.

WiFi access cyber security research

Description:
The service and its description is correlated with “WiFi access cyber security control system”. Expected results of the project - to be evaluated in a variety of analytical models to application of Wi-Fi devices for identification, an analytical model for informative spectrum and impedance characteristics that will allow the identification of different WiFi network devices, as well as the assessment of the adequacy of the model based on empirical data.

Control solutions and expertise of electrical wheel chairs

Description:
Creating programmable algorithm based on conventional electric wheelchairs gaining sophistication. For example avoid various obstacles, according to the GPS coordinates traveling from point A to point B and understand multiple management interfaces.

Technical studies of Industrial control systems, security, development and implementation of feasibilities

Description:
A technical realization study of various levels of existing industrial control systems security and modernization that helps to determine the weak and strong points, provides recommendations and possible solutions to improve the situation.

Preparation of technological documentation

Description:
Preparation of technological documentation according to various production processes rules, standards and guidelines, which defines production processes and management systems and their installations, corresponding to safety and environmental requirements.

Eye tracking systems for disabled people and expertise

Description:
Using computer vision algorithms and expert knowledge high speed point of care registration system is developed, which can not only manage the devices connected to the computer and but any programs as well. Intelligent visual tracking systems are often used for marketing purposes, when you want to explore the user's reaction to a new product design.

Detection of the partial discharges and estimation of the fault zones in the transmission lines and transformers

Description:
The assessment of high voltage equipment insulation reliability, taking into account the partial discharges initial level and the application of advanced diagnostic, measurement and data analysis techniques for continuous monitoring partial discharges describing the characteristics of the change in the various grid structures and devices. To achieve this, new measurement methods, their functionality enabling technologies and data analysis algorithms are developed.

Simulation of rotating magnetic field equipment

Description:
The rotating magnetic field device model, measured parameters, the optimal structure research. Services rendered result - the rotating magnetic field device model, the parameter analysis, recommendations of the rotating magnetic field device design optimization.

Research os low frequency electrmagnetic fields

Description:
Low-frequency electromagnetic fields modelling and conducting field measurements of parameters. Electromagnetic field distribution in the devices and near investigation in order to optimize their designs or detect dangerous locations near powerful electric or magnetic field radiation. Services rendered result - the installation or design model, the parameters of the electromagnetic field distribution patterns.

Feasibility studies to evaluate possibility of embedded systems application for evaluation of transport system dynamic characteristics

Description:
The feasibility study evaluating embedded systems development and application to a specific transport. The type of the embedded system and what data collection, transmission and processing ways are the most effective are examined.

Development, research and feasability study for creation model for odontology pulsoximeter with probes

Description:
Advanced medical and electronics engineering research application for early diagnosis and treatment. Biomedical devices and diagnostic tools development and testing. Dental pulse oximeter operating characteristics determination, model creation and testing, testing of specialized dental sensors mechanical and electrical characteristics, layouts of the sensors are designed and tested. Sensor design, drawing preparation and printing with 3D printer.

New calculation methods, the design of the structural elements of the multilayer

Description:
Recently, in order to enhance the effectiveness of the materials properties, are used multilayer structures. However the traditional mechanical methods in most cases are not suitable. Experience of many years in solving and developing new calculation methods enable to design the different structures.

Analysis and modeling of mechanical systems

Description:
Analysis (strength and/or motion) and optimization of the component, device or product. The model can be planar (2D) or/and three-dimensional (3D). Research and studies are carried out by using the analytical and/or numerical engineering methods.

The research on the needs for welding robots in metal production and processing companies

Description:
The solutions of innovative and smart technologies have been the challenge for the contemporary metal processing and production companies. With the increasing necessity to maintain the constant and effective production process, to remain competitive in emerging markets and to strive for advancement, a number of companies encounter the need for identifying the demand for effective and flexible automated welding technologies. The surveys of industries indicate that technological changes are too rapid and have to be monitored on a continuous basis. This issue impedes the possibilities for forecasting the demand of robotics process and has been problematic for companies which aim to apply the welding robots and for the companies who sell the welding robots. One of the suggested alternatives for problem solution is the ongoing monitoring and evaluation of existing and potential customers and their needs. The result of the research is the study on the demand for welding robots in metal production and processing companies.

Research and development of ultrasonic measurement/imaging systems

Description:
Ultrasonic systems, ultrasonic measurement equipment, ultrasonic measurements, flow measurement, ultrasonic evaluation of material properties, ultrasound electronics, ultrasonic pulser, ultrasonic preamplifier, signal processing, non-destructive testing, industrial measurements, contract research and development

Research and development, feasibility studies, consultancies of glucometry systems

Description:
Blood gliucose level can be estimated using ultrasonic/electrical/light parameters or their combinations. Knowledge on ultrasonic equipment design, impedance measurement, signal processing, contract research and development.

Research and development, feasibility studies, consultancies of ultrasound application in food/agriculture safety systems

Description:
Ultrasonic application for food safety research. Studied fruit / cereals / grains / flour / dough / pastries / cheese / other foods ultrasonic parameters (attenuation / propagation speed / acoustic nonlinearity / reflection / access factor) relationship with food grade / quality characteristics. With ultrasound these properties can be measured in a non-invasive manner, ensuring constant food quality / characteristics of brand monitoring / production processes.

Solid state lighting driver electronics research, development and feasibility studies

Description:
Quality of the solid state light source driver is defined by output current, voltage stability, attainable pulse durations, rise, fall slew rate. Depending of LED or laser, power requirements are different. Research and development is offered and existing systems quality evaluation, feasibility studies.

Signage systems for transport research, development and feasibility studies

Description:
Vehicle video information systems and feasibility studies. Video Information System to provide a visual (graphical, textual and video) information to the flow or the rally competitor. Screen size can be very small (HUD: virtual instrument panel) or very large when this is a large outdoor sign advertising scoreboard or a graphic display of the result. The result will be the technical feasibility study - research analytical work, assessing the task realization technical and technological possibilities, recommendations targets for parameters essential aspects.

Signage systems research, development and feasibility studies

Description:
Video information system designed to provide a visual (graphics, text or video) information from the instrument panel to the very large outdoor and indoor displays. We prepare feasibility studies and fully completed projects suitable for mass production.

Remote visual registration systems and expertise

Description:
Remote visual registration systems and expertise

Electronic products testing and calibration systems, applied research and prototyping

Description:
Electronics production process final stage is their FW programming, calibration and functional testing. The latter includes the creation of the testing methods, the formation of stimuli, reaction processing and formulation of the decision qualitative classification. We develop mechatronic systems for these procedures to be performed automatically in middle and high-throughput production. Experience in developing similar systems in Italy, UK, German and Lithuanian companies.

Quality assessment of the electronic systems

Description:
Electronic Systems Project Quality Rating: schematic, topological and constructive decision analysis, evaluation, advice, solutions. Process systems for electromagnetic compatibility (EMC) feasibility studies. System EMC analysis, recommendations to combat interference, technical and technological solutions options analysis. System or node technological possibilities realization, recommendationsfor parameters. Environmental analysis of electromagnetic compatibility, technical and technological solutions to combat interference implementation, analysis.

Inovative maintenance system for vehicle park (study)

Description:
The service and its description is correlated with the service, “Innovative maintenance system for vehicle park (technical feasibility study)”. Technical feasibility study establishes requirements for vehicle maintenance system and criteria for evaluation of the technical condition of the car. Software created by the Windows operating system for computers is obtained thanks to various real-time and reference information about the vehicle's operating situation, just after entering the vehicle license plate number (created through the graphical user interface (Web)): technical passport; data on the movement of the vehicle (speed of movement, the location of the movement history); consumables and spare parts replacement necessity; warning function of the necessary technical maintenance work; Various reports on the movement route and speed, technical maintenance and service operations.

Applied research of ultralow power wireless monitoring and control systems

Description:
The biggest problem of wireless monitoring and management systems is a limited battery life. There is a need to change the batteries. It's expensive, and sometimes impossible. Intelligent, interactive Ultra Low Power sensors and control systems are created.

Development of production process control algorithms and simulation

Description:
Using the technological process knowledge production processes and equipment control algorithms and their performance is simulated using the software simulation software and possibly realized in real hardware and algorithm validation is performed

Data analysis

Description:

Data analysis

Design and research of interactive sensoring systems

Description:
All modern intelligent electronic systems are based on microcontrollers and sensors that “sense” the environment. Managed (interactive) temperature, humidity, magnetic field, position sensors are developed and applied.

Recognition of objects and environment using computer vision and measurement of their quality parameters

Description:
Development of computer vision systems for analysis of industrial objects such as control of wire marking, recognition of objects orientation, visual control of assembled modules. Development and research of computer vision systems for measurement of geometric parameters of large objects (furniture plates, control boards, etc.) and detection of defects. Research the possibilities of computer vision application for mobile robots and their grippers control.

Design and research of medical devices monitoring and management

Description:
Modern medical practices using large amounts of electronic equipment produced by different manufacturers at different times, so there are hardware integration and monitoring problems. Creating a user-friendly environment and interface to facilitate the work of doctors, ensuring patient safety.

Research and development on equipment electromagnetic compatibility

Description:
Experience in the electromagnetic compatibility assessment: electromagnetic interference sources, search, analysis and recommendations to combat interference, provision of the technical and technological solutions and analysis. Printed circuit boards design analysis of electromagnetic interference and resistance levels. EMI tests, consultations.

Innovative research of time and cost accounting integration in the context of increasing companies competitive advantage

Description:

Innovative research of time and cost accounting integration in the context of increasing companies competitive advantage

Applied research of control systems of technological processes

Description:
All modern intelligent electronic systems are based on microcontrollers and sensors that “sense” the environment. Managed (interactive) temperature, humidity, magnetic field, position sensors are developed and applied.

Design and research of trafic management systems

Description:
One of the biggest problems of modern transport - parking. Vehicles require detection sensors and data communication devices, monitoring and control measures. Ultrasound and magnetic vehicle detection sensors are developed. There is a possibility to determine the speed and gauges of a moving vehicle.

Investigation of the reliability of an automatic system and its impact on the operation of the electrical grid

Description:

Investigation of the reliability of an automatic system and its impact on the operation of the electrical grid

Creating a methodology for rapid potential equalization of the battery

Description:

Creating a methodology for rapid potential equalization of the battery

Design, research and adaptation of flexible automated systems and their components

Description:
Design, research and adaptation for user demands of flexible automated systems and processes based on application of remote control, checking, measurement and forecast systems. Modelling, simulation and visualization of such systems.

Design and research of autonomous mobile robots and their control and navigation systems for development of autonomous transport infrastructure (autonomous service robots, autonomous passengers transportation means, etc.) and intelligent logistics (robotized service of storehouses, robotized logistics of materials, etc.)

Description:
Design and research of control and navigation systems of autonomous mobile robots for industrial, service or military application. For instance, such robots could be designed for raw materials or products transportation. Robots could be equiped with one or two manipulators for loading/unloading or other additional functions. Design and research of service robots is concentrated on stairs climbing robots.

Applied research of robotics workcelles. Research of application possibilities of industrial robots nonstandard usage for new production processes

Description:
Application of industrial robots for automation of production processes when robots encompass functions of several different devices. For instance, it could be measurement functions when robots use contact method or computer vision system. Development of software, which generates robot control programme from CAD files which eliminates usual programming.

An inclusive and creative society: new, results-oriented public service provision, and small and medium business development research: (I) new services / product demand study; (II) service / product quality study; (III) research on company's marketing culture as a competitive advantage

Description:
A dynamic, active competition and often complicated business environment triggers the need to look for not only traditional, but often unconventional solutions for business development and to ensure its stability. Companies are intensively looking for ways to find out customers’ needs and expectations, how to evaluate their satisfaction with the product, what factors are most important in terms of product quality and encourage consumers to be loyal and what shapes the company's exclusive, hard-copied competitive advantage. The studies to get the answers to these questions are very important, but more importantly, to use the results for proactive activities in order to shape the organizational culture, in which a self-governing organization learning gains more permanent status.

FEM: Finite element modeling of physical phenomena

Description:

Finite Element Modeling (FEM) service offers a comprehensive approach to simulate and analyze a wide array of physical phenomena, e.g., optics, nanophotonics, heat transfer, and structural mechanics. Using advanced computational techniques, we break down complex systems into smaller elements. The simple equations that model these finite elements are then assembled into a larger system of equations that models the entire problem allowing conclusions to be drawn about the behavior of complex systems. In structural mechanics, the simulation of mechanical responses within materials and structures helps predict stress distribution, deformation, and failure mechanisms under various loading conditions. For optics and nanophotonics, FEM modeling facilitates the understanding of light propagation, interaction with materials, and the behavior of electromagnetic waves at the nanoscale. In the domain of heat transfer, FEM allows for the precise analysis of thermal behavior within materials and systems. We predict temperature distributions, heat flow, and thermal stresses, aiding in the design of efficient cooling systems.