Electron beam lithography, electron microscope, energy dispersive spectroscopy

Description:
Electron beam lithography, electron microscope, energy dispersive spectroscopy

3D-Computed X-ray tomography system Rayscan 250E

Description:

Computed tomography (CT) is an imaging procedure that uses X–ray source to irradiate the object at different angles and 2D images at a flat panel detector are recorded. Later 3D images of the density distribution inside the object are reconstructed. The computerized tomography calculation allows the 3D reconstruction of the measured volumetric data inside the object.  Up to 3 μm resolution can be achieved.

KRATOS molecular beam epitaxy system for GaAs with control.

Description:

KRATOS molecular beam epitaxy system for GaAs with control.

Universal surface analysis system for X-Ray photoelectron spectroscopy, ion scatering spectroscopy, reflection electron energy loss spectroscopy, and angle Resolved XPS (ARXPS)

Description:
Universal surface analysis system for X-Ray photoelectron spectroscopy, ion scatering spectroscopy, reflection electron energy loss spectroscopy, and angle Resolved XPS (ARXPS)

Ray photoelectron spectroscopy and Auger electron spectroscopy system KRATOS XSAM800

Description:

Ray photoelectron spectroscopy and Auger electron spectroscopy system KRATOS XSAM800

Q-FOG Cyclic corrosion tester

Description:
Q-FOG Cyclic corrosion tester

Pull off testing equipment

Description:
Pull off testing equipment

Thermal imaging camera

Description:
Thermal imaging camera

Taber abraser

Description:
Taber abraser

Water permeability tester WE6M4

Description:
Water permeability tester WE6M4

Optical microscope MCX300

Description:
Optical microscope MCX300

Froster 720CR

Description:
Froster 720CR

PC osciloscope PicoScope 6404B

Description:
PC osciloscope PicoScope 6404B

Programmable function generator RIGOL DG5252 with Digital Logic Output Module

Description:
Programmable function generator RIGOL DG5252 with Digital Logic Output Module

Wireless 8 channels biophysiological signal acquisition system Guger Technologies g.MOBILab

Description:
Wireless 8 channels biophysiological signal acquisition system Guger Technologies g.MOBILab

Digital oscilloscope Tektronix MDO4104B-6

Description:
Digital oscilloscope Tektronix MDO4104B-6

Biophysiological signal acquisition and analysis system

Description:
Biophysiological signal acquisition and analysis system

Ultrasound fantom set

Description:
Ultrasound fantom set

Ultrasonic sectorial scannning portable echoscope SeeMore USB OP 12 MHz

Description:
Ultrasonic sectorial scannning portable echoscope SeeMore USB OP 12 MHz

Broadband high power amplifier Empower RF

Description:
Broadband high power amplifier Empower RF

Cardio pulmonary exercise testing

Description:
Cardio pulmonary exercise testing

Yeast fermentation bioreactor

Description:
Yeast fermentation bioreactor designed to carry. The equipment consists of: bioreactor, dosing pump, 4 Bio control unit. Culture medium maintained at a temperature, pH, and air.

Hybrid Rework system

Description:
Hybrid Rework system

Universal all-in-one instrument for measurement of air temperature, air velocity, relative humidity, illluminance, luminance and the Class 1 (Pro Set) or Class 2 (Euro Set and Standard Set) sound analyses.

Description:
Universal all-in-one instrument for measurement of air temperature, air velocity, relative humidity, illluminance, luminance and the Class 1 (Pro Set) or Class 2 (Euro Set and Standard Set) sound analyses.

Laboratory of intelligent home

Description:
Laboratory of intelligent home

Intelligent Systems Research Laboratory terminal equipment

Description:
Intelligent Systems Research Laboratory terminal equipment

3d printer

Description:
3d printer

Tektronix TDS220 Oscilloscope

Description:
Tektronix TDS220 Oscilloscope

3d scanner

Description:
3d scanner

Electronic scale GR-202 No.14210265

Description:
Electronic scale GR-202 No.14210265

Atomic force microscope

Description:
Atomic force microscope

Ellipsometer L117 No.166-AK

Description:
Ellipsometer L117 No.166-AK

UV-Vis spectrometer

Description:
UV-Vis spectrometer

Ceramic powder tablets formation device 99999-/F307

Description:
Ceramic powder tablets formation device 99999-/F307

Evaporation system with three magnetronic sources

Description:
Evaporation system with three magnetronic sources

Thin film deposition system: deposition using electron beam evaporation

Description:
Thin film deposition system: deposition using electron beam evaporation

High temperature furnace el.SNOL 7/1300L with E5CK program

Description:
High temperature furnace el.SNOL 7/1300L with E5CK program

Thin film deposition system PVD 75

Description:
Thin film deposition system PVD 75

Magnetron "Cannon" TM3FS10KBS Torus 3HV

Description:
Magnetron "Cannon" TM3FS10KBS Torus 3HV

X-ray machine X-RAY

Description:
X-ray machine X-RAY

Dark field microscope with extras NIKON Eclipse LV100D

Description:
Dark field microscope with extras NIKON Eclipse LV100D

Dosimeter M4 T11006-1759

Description:
Dosimeter M4 T11006-1759

MOSFET microdosimeters

Description:
MOSFET microdosimeters

Identification device SN:935-3367

Description:
Identification device SN:935-3367

X-ray radiation dose measurement system 70 R/F MAM S/N:127995

Description:
X-ray radiation dose measurement system 70 R/F MAM S/N:127995

Dosimetric brachytheraphy system with extras and phantom

Description:
Dosimetric brachytheraphy system with extras and phantom

Zwick Roell Materials Testing Machine BDO-SBO.5TH

Description:
Zwick Roell Materials Testing Machine BDO-SBO.5TH

Spectrophotometer SF450X W/UV

Description:
Spectrophotometer SF450X W/UV

Spectrophotometer XRite Color Digital

Description:
Spectrophotometer XRite Color Digital

Zwick Roell Materials Testing Machine

Description:
Zwick Roell Materials Testing Machine

Microscope DPM 300

Description:
Microscope DPM 300

martindale testing machine

Description:
martindale testing machine

Friction/peel tester

Description:
Friction/peel tester

Paste Ink Proofer

Description:
Paste Ink Proofer

Stand of granular solid fuel burining test

Description:
Stand of granular solid fuel burining test

FAG BRAI³ Braille Dot Checker

Description:
FAG BRAI³ Braille Dot Checker

Hardness tester

Description:
Hardness tester

Hardness tester

Description:
Hardness tester

Impact tester (PEGASIL/ZIPOR), Nr. 50.130

Description:
Impact tester (PEGASIL/ZIPOR), Nr. 50.130

Water vapour absorption test apparatus STD 478 (f. SATRA), Nr. 478-6-0512

Description:
Water vapour absorption test apparatus STD 478 (f. SATRA), Nr. 478-6-0512

Insulation agains heat apparatus IG/ISOC (f. GIULIANI), Nr. 13917

Description:
Insulation agains heat apparatus IG/ISOC (f. GIULIANI), Nr. 13917

Water vapour permeability test equipment STM 473 (SATRA), Nr. 473-5-0512:

Description:
Water vapour permeability test equipment STM 473 (SATRA), Nr. 473-5-0512:

Electrodynamic Vibration Excitter systems

Description:
Electrodynamic Vibration Excitter systems

Multifunctional device Test 445

Description:
Multifunctional device Test 445

Bally penetrometer STM 703 (f. SATRA), Nr. 703-1-0512

Description:
Bally penetrometer STM 703 (f. SATRA), Nr. 703-1-0512

Elecrical resistance testing instrument (PEGASIL/ZIPOR), No. 50.130

Description:
Elecrical resistance testing instrument (PEGASIL/ZIPOR), No. 50.130

Materials Testing Machine

Description:
Materials Testing Machine

EMG

Description:
EMG

Treadmill

Description:
Treadmill

Mask aligner MA-750

Description:
Mask aligner MA-750

3D Motion capture system

Description:
3D Motion capture system

Rowing trainer

Description:
Rowing trainer

Cardio trainer, bicycle

Description:
Cardio trainer, bicycle

UV-VIS spektrometer

Description:
UV-VIS spektrometer

Scale KERN PLE 310-3N

Description:
Scale KERN PLE 310-3N

The fiber-optic spectrometer AvaSpec-2048

Description:
The fiber-optic spectrometer AvaSpec-2048

Optical microscope NIKON (analyzer)

Description:
Optical microscope NIKON (analyzer)

Optical and fluorescence microscope

Description:
Optical and fluorescence microscope

microwave plasma enhanced chemical vapor deposition system

Description:
microwave plasma enhanced chemical vapor deposition system

Atomic force microscope NT-206

Description:
Atomic force microscope NT-206

Spincoater, hotplate and UV curing lamp for formation of thin films

Description:
Spincoater, hotplate and UV curing lamp for formation of thin films

High frequency spectrum analyzer

Description:
High frequency spectrum analyzer

Energy dispersive X-Ray analysis

Description:
Energy dispersive X-Ray analysis

Lloyd`s mirror holographic lithography setup.

Description:
Lloyd`s mirror holographic lithography setup.

Fourier transform infrared spectrometer

Description:
Fourier transform infrared spectrometer

Device for galvanoplastic multiplication

Description:
Device for galvanoplastic multiplication

N5183A MXG Microwave Analog Signal Generator, up to 40 GHz

Description:
N5183A MXG Microwave Analog Signal Generator, up to 40 GHz

solar spectra simulator

Description:
solar spectra simulator

Digital osciloscope Wave Surfer 454

Description:
Digital osciloscope Wave Surfer 454

2 Channel 100MHz Arbitrary Function Generator with USB Interfacing

Description:
2 Channel 100MHz Arbitrary Function Generator with USB Interfacing

Precision multimeter

Description:
Precision multimeter

Advanced spectrum analyzer

Description:
Advanced spectrum analyzer

RF reactive ion etching system

Description:
RF reactive ion etching system

diamond like carbon ion beam synthesis system

Description:
diamond like carbon ion beam synthesis system

ion etching system

Description:
ion etching system

vacuum evaporation unit

Description:
vacuum evaporation unit

vacuum evaporation unit

Description:
vacuum evaporation unit

3-axis mechanical scanner

Description:
3-axis mechanical scanner

Reference Temperature Calibrator DRY-BLOCK CALIBRATOR - -22 TO 155°C

Description:
Reference Temperature Calibrator DRY-BLOCK CALIBRATOR - -22 TO 155°C

A set of weights 333-084

Description:
A set of weights 333-084

High Resolution Oscilloscopes

Description:
High Resolution Oscilloscopes

Weighing scales PS 8000/C/1

Description:
Weighing scales PS 8000/C/1

Reference Temperature Calibrator

Description:
Reference Temperature Calibrator

Vertical Milling Center Emco Concept Mill 300

Description:
Vertical Milling Center Emco Concept Mill 300

Microscope MN8000

Description:
Microscope MN8000

Brinell Hardness Tester TH600

Description:
Brinell Hardness Tester TH600

Metallurgical microscope "Olimpus BX41M"

Description:
Metallurgical microscope "Olimpus BX41M"

Rockwell Hardness Tester TH-301

Description:
Rockwell Hardness Tester TH-301

TH-141 Leeb Hardness tester

Description:
TH-141 Leeb Hardness tester

Surface roughess measuring tool GARANT ST1

Description:
Surface roughess measuring tool GARANT ST1

Concrete Covermeter Elcometer 311HT-1

Description:
Concrete Covermeter Elcometer 311HT-1

Direct shear machine ADR-1 LO3400/X-10

Description:
Direct shear machine ADR-1 LO3400/X-10

Network spectrum impendanse analyzator

Description:
Network spectrum impendanse analyzator

Network spectrum impendanse analyzator

Description:
Network spectrum impendanse analyzator

Immersion NTR acoustic intensity measurement system (AIMS) that allows measuring and mapping of acoustic fields in liquids

Description:
Immersion NTR acoustic intensity measurement system (AIMS) that allows measuring and mapping of acoustic fields in liquids

2 channel generator

Description:
2 channel generator

SV 212 SOUND

Description:
SV 212 SOUND

The force sensor KAL 300kN

Description:
The force sensor KAL 300kN

"Tescan": precise 6-axis cartesian and polar scanner with water tank

Description:
"Tescan": precise 6-axis cartesian and polar scanner with water tank

Fluxmeter F01

Description:
Fluxmeter F01

Network analyzer

Description:
Network analyzer

Luminance meter LS-110

Description:
Luminance meter LS-110

RVG, sensor, program KDIS

Description:
RVG, sensor, program KDIS

Temperature test chamber HD-BT-40B

Description:
Temperature test chamber HD-BT-40B

Vector network analyzer

Description:
Vector network analyzer

Signal acquistition, generation and analysis system National Instruments PXI

Description:
Signal acquistition, generation and analysis system National Instruments PXI

Climatic chamber

Description:
Climatic chamber

Testing device ridge for opening and closing

Description:
Testing device ridge for opening and closing

Nikon Total Station DTM-332 N.023786

Description:
Nikon Total Station DTM-332 N.023786

Voice telephony signaling protocols converter

Description:
Voice telephony signaling protocols converter

Frequency drive MDI AA 570 stand

Description:
The stand consists of a frequency converter and powder braking device of the engine load switching. The load can be changed manually or set an automatic dependency. Load torque can be proportional to the square of the speed (fan characteristics) may be avirkščiai proportional to the speed.

Digital oscilloscope

Description:
Digital oscilloscope

Spin coater for the formation of thin layers

Description:
Spin coater for the formation of thin layers

UV laser

Description:
UV laser

Power source of 1kW radiofrequency

Description:
Power source of 1kW radiofrequency

Analog / digital converters, mod. NI9201, 9481, NI9211, NI9401, cDAQ-9174, 382276

Description:
Analog / digital converters, mod. NI9201, 9481, NI9211, NI9401, cDAQ-9174, 382276

Osciloscope

Description:
Osciloscope

Noise

Description:
Noise

Physiological parameters monitoring system

Description:
Physiological parameters monitoring system

Mobile robot Pioneer P3-DX

Description:
Mobile robot Pioneer P3-DX

Device for multiplication of optical security marks MSM-1

Description:
Device for multiplication of optical security marks MSM-1

Media Gateway

Description:
Media Gateway

Raman spectroscope

Description:
Raman spectroscope

Electrodynamic Vibration Excitter systems

Description:
Electrodynamic Vibration Excitter systems

Device of determination of paper (paperboard) surface smoothness

Description:
Device of determination of paper (paperboard) surface smoothness

Abrasion Resistance Tester IG/ABR/DIN (f. GIULIANI), Nr. 13916

Description:
Abrasion Resistance Tester IG/ABR/DIN (f. GIULIANI), Nr. 13916

Atomic Absorption Spectrometer Perkin Elmer Model 403

Description:
Atomic Absorption Spectrometer Perkin Elmer Model 403

Stereo microscope with digital camera „Olympus“ MVX10

Description:
Stereo microscope with digital camera „Olympus“ MVX10

Testing rigd "Hot Box"

Description:
Testing rigd "Hot Box"

 Diagnostic Equipment

Description:
 Diagnostic Equipment

K850WM Large Chamber Critical Point Dryer

Description:
K850WM Large Chamber Critical Point Dryer

Hydraulic Station NS-PAS Ser.No. 820

Description:
Hydraulic Station NS-PAS Ser.No. 820

Infrared camera mod. TP8 with the lens, SM: 06207

Description:
Infrared camera mod. TP8 with the lens, SM: 06207

Raman spectroscopy system

Description:
Raman spectroscopy system

High speed scanning acoustic microscope KSI-V8

Description:
High speed scanning acoustic microscope KSI-V8

Multi-channel Eddy current / ultrasonic phased array system „Olympus Omniscan Mx“

Description:
Multi-channel Eddy current / ultrasonic phased array system „Olympus Omniscan Mx“

Noise

Description:
Noise

Device for testing of mechanical strenth of windows

Description:
Device for testing of mechanical strenth of windows

LRC/ESR meter 889B

Description:
LRC/ESR meter 889B

Impact noise source

Description:
Impact noise source

Acoustic analyzer LD2800

Description:
Acoustic analyzer LD2800

Universal test machine Z050TN

Description:
Universal test machine Z050TN

impedance analyzer

Description:
impedance analyzer

Stand for Metal and semiconductor electrical conductivity testing

Description:
Stand for Metal and semiconductor electrical conductivity testing.

Stand of liquid and solid fuel ash analysis. Analysis is performed acording EU standard

Description:
Stand of liquid and solid fuel ash analysis. Analysis is performed acording EU standard

The data collection and vibration measuring device VIBROTEST 60

Description:
The data collection and vibration measuring device VIBROTEST 60

Sound pressure level meter Investigator 2260. The basic system.

Description:
Sound pressure level meter Investigator 2260. The basic system.

The portable measurement and data processing unit Pulse 3560

Description:
The portable measurement and data processing unit Pulse 3560

Stand of oil compostion analysis (for study process)

Description:
Stand of oil compostion analysis (for study process)

Wearable device for monitoring human physical activity parameters MinimaxX (model v2.OPCB)

Description:
Wearable device for monitoring human physical activity parameters MinimaxX (model v2.OPCB)

The shock device

Description:
The shock device

IL 1700 Research Radiometer

Description:
IL 1700 Research Radiometer

Spectrum analyzer (150 kHz - 3 GHz)

Description:
A spectrum analyzer (150 kHz - 3 GHz ) measures the magnitude of an input signal versus frequency within the full frequency range of the instrument. The primary use is to measure the power of the spectrum of known and unknown signals.

Generator output block

Description:
Generator output block

Generator output block

Description:
Generator output block

Device for roughness measurement of mechanical surfaces

Description:
Device for roughness measurement of mechanical surfaces

Langmuir-Blodgett trough and control system

Description:
Langmuir-Blodgett trough and control system

Biogas flow meter

Description:
Meter for low flow measurement using laminar flow elements. Meter is used with the differential pressure transducer, valve block and universal indicator.

Stand for metal and semiconductor electrical conductivity testing

Description:
Stand for metal and semiconductor electrical conductivity testing.

RF signal generator

Description:
RF signal generator

Electrical safety analyzer of medical electrical appliances

Description:
Electrical safety analyzer of medical electrical appliances

DC 4-quadrant drive stand

Description:
Stand for access to Phase reverse gear controlled rectifier - DC motor (VL - V) diagram and its work. Tested the iron work with an active load, then to the engine when the engine offense and load. The actuator is tested it with the engine and regenerative braking mode, when there is a separate and total iron work groups.

DSP evaluation kit

Description:
DSP evaluation kit

Analyzer of non-invasive blood pressure registrators

Description:
Analyzer of non-invasive blood pressure registrators

KCBH, P2-83 VSWR measurement

Description:
KCHB,P2-83 VSWR measurement

Electric power quality analyser M12192

Description:
Electric power quality analyser M12192

Climatic chamber

Description:
Climatic chamber

Induction motor test stand

Description:
Stand enables experimentally get short cage rotor induction motor mechanical and energy characteristics in different operating modes. Tests carried out by combining the stator windings star and triangle. Mechanically loaded engine braking device equipped with frequency converter. Parameters measured with a digital measuring device.

"Tescan": Precise 11-axis cartesian and polar scanner with water tank

Description:
"Tescan": Precise 11-axis cartesian and polar scanner with water tank

Radio frequency power meter

Description:
Radio frequency power meter

Electromagnetic field intensity meter

Description:
Electromagnetic field intensity meter

Multi-channel ultrasonic phased array system „Dasel Sitau“ 128/128 (bandwidth from 0.8 up to 16 MHz, at -3 dB)

Description:
Multi-channel ultrasonic phased array system „Dasel Sitau“ 128/128 (bandwidth from 0.8 up to 16 MHz, at -3 dB)

Physiological parameters monitoring system

Description:
Physiological parameters monitoring system

Ultrasound scanner together with set of transducers for the noninvasive imaging of human internal tissues

Description:
Ultrasound scanner together with set of transducers for the noninvasive imaging of human internal tissues

Room automation system Instabus EIB

Description:
The system is designed to simulate and investigate the regulation of lighting, blinds, heating system regulation. Equipment allows to carry out meteorological data tracking.

PC processor designed to work with Linux. 266MKz Pentium CPU, 64MB of RAM, video.

Description:
PC processor designed to work with Linux. 266MKz Pentium CPU, 64MB of RAM, video.

K2D image processing board for video signal from the Autonomy robot conversion to a digital signal

Description:
K2D image processing board for video signal from the Autonomy robot conversion to a digital signal. The module for video making and autonomous robot navigation.

Overvoltages simulator

Description:
Overvoltages simulator

Asynchronous drive with frequency converter stand

Description:
Stand for access to the frequency converter operating principle, design and management capabilities. Determine the size of the added voltage stator resistance compensation, motor voltage versus frequency, no-load speed and gliding. Obtained drive mechanical characteristics at different frequencies.

DC motor stand

Description:
Stand allows you to receive a DC electric actuators and mechanical characteristics of the various operating modes. Examine the foreign excited motor control performance resulting from the mechanical characteristics of the engine exhaust and dynamic braking. Tested the motor speed control by changing the flow of excitation. Derived by combining the mechanical characteristics of the engine as a coherent excitation machine and as a mixed excitation machine.

Tester for 50b/s to 2.048Mb/s digital circuits

Description:
Tester for 50b/s to 2.048Mb/s digital circuits (E1 G.703, G.704).

Gripper

Description:
Chuck a size of 65 x 90 x 10 mm, max. Load of 50g. 2 WAR motors with encoder designed robotic arm or manipulator. Its purpose is to perform gripping - lifting - laying functions.

Manual soldering eqiment for assembly and repair

Description:
Manual soldering eqiment for assembly and repair

Training stand for engine rotation speed control

Description:
Training stand for engine rotation speed control system for examination using a Siemens SIMATIC S300 programmable logic controller. The study bench adjustable speed drives with frequency converter and asynchronous motor. Tested air speed devices.

Laboratory electrical motors stand

Description:
Laboratory electrical motors stand

SDH Add/Drop Multiplexer

Description:
SDH Add/Drop Multiplexer

Programmable logic controller processor module 024 QUANTUM UNITY / 7168K

Description:
Programmable logic controller processor module 024 QUANTUM UNITY / 7168K. Widget for processes, signal processing equipment and programming management. The processor supports Modbus RS232 / RS485, Modbus Plus, Ethernet TCP / IP and USB.

Technological process modeling system

Description:
Technological process modeling. Pneumatic valve control using the AS-i and PROFIBUS communication via Siemens SIMATIC S300 programmable logic controller.

Osciloscope

Description:
Osciloscope

Servo drive with MD1AE965MR motor stand

Description:
Stand for actuators investigation and coordination parameters. The actuator used Brushless AC motor and frequency converter. The control system consists of hierarchical management approach. Actuator adjustment is carried out using the software package WMEMOC. Explored the controller parameters on pereinamiesims processes

Stand for access to the industrial drive Siemens Micromaster 420

Description:
Stand for access to the industrial drive Siemens Micromaster 420. Examined the drive structure, functional diagram, starting and stopping methods settings and change. An optimal motor feeding voltage versus frequency. Tested slip compensation.

Five degrees of freedom manipulator

Description:
Five degrees of freedom manipulator controlled low-power servo motor 20x30 mm with jaw. Designed for students training

Training bench is a positioning system with three-phase asynchronous motor and valve motor

Description:
Training bench is a positioning system with three-phase asynchronous motor and valve motor. Engines powered by the company SEW frequency inverters. Each engine has a position sensor (encoder). Control Algoritam based upon the hierarchical management. One drive is master, the other slave to get the synchronous movement.

AC drive MD1AA750A6 stand

Description:
The study bench adjustable speed drives with frequency converter Altivar 61 and asynchronous motor applies to air traffic control. Tested air speed devices. The air stream is adjusted by changing the engine speed or the air passage deflector. Examine when the control method is more economical.

Mixed Signal Oscilloscope DLM2054 4ch, 500MHz

Description:
Mixed Signal Oscilloscope DLM2054 4ch, 500MHz

MCU FW development system

Description:
MCU FW development system

Spectrum analyser

Description:
Spectrum analyser

Thermovision camera

Description:
Thermovision camera

Satellite with equipment for signals reception and amplifying

Description:
Satellite of 5 m. diameter with equipment for signals reception and amplifying

Transcoder

Description:
Transcoder

Mixed Domain Oscilloscope

Description:
Mixed Domain Oscilloscope

Arbitrary waveform generator Rigol DG5251

Description:
Arbitrary waveform generator Rigol DG5251

Cable and antena analyser

Description:
Cable and antena analyser

Arbitrary waveform generator Rigol DG5251

Description:
Arbitrary waveform generator Rigol DG5251

SDH Add/Drop Multiplexer

Description:
SDH Add/Drop Multiplexer

DSP evaluation kit

Description:
DSP evaluation kit

Syringe infusion pump docking station

Description:
Syringe infusion pump docking station "Infusion station IDS", 2 pcs. "Aiteks 2016 Universal" infusion pump

Digital Oscilloscope RIGOL DS1302CA

Description:
300 MHz Digital Oscilloscope

DSP evaluation kit

Description:
DSP evaluation kit

SDH Add/Drop Multiplexer

Description:
SDH Add/Drop Multiplexer

Spectrum analyzer (150 kHz - 3 GHz)

Description:
A spectrum analyzer (150 kHz - 3 GHz ) measures the magnitude of an input signal versus frequency within the full frequency range of the instrument. The primary use is to measure the power of the spectrum of known and unknown signals.

Physiological parameters monitoring system

Description:
Physiological parameters monitoring system

DSP evaluation kit

Description:
DSP evaluation kit

General Physics Laboratory - 247

Description:
Physics laboratory works are carried out for deeper knowledge of the basic laws of physics: performing them students learn to work with measurement devices and are introduced to measurement methods; they learn to depict methods as graphs and evaluate the reliability of the experimental results. Physics 2 (optics and atomic physics) laboratory works.

General Physics Laboratory - 263

Description:
Physics laboratory works are carried out for deeper knowledge of the basic laws of physics: performing those students learn to work with measurement devices and are introduced to measurement methods; they learn to depict methods as graphs and evaluate the reliability of the experimental results. Physics 1 (mechanics and electromagnetism) laboratory works. Physics 2 (optics and atomic physics) laboratory works.

Laboratory of Physical Technologies and Microtechnology

Description:
Laboratory work objectives: to acquire modern microtechnology, to obtain practice in use of technological equipment and measurement of formed microstructures electrophysical characteristics.

General Physics Laboratory - 261

Description:
Physics laboratory works are carried out for deeper knowledge of the basic laws of physics: performing those students learn to work with measurement devices and are introduced to measurement methods; they learn to depict methods as graphs and evaluate the reliability of the experimental results. Physics 1 (mechanics and electromagnetism) laboratory works.

General Physics Laboratory - 225

Description:
Physics laboratory works are carried out for deeper knowledge of the basic laws of physics: performing those students learn to work with measurement devices and are introduced to measurement methods; they learn to depict methods as graphs and evaluate the reliability of the experimental results. Physics 1 (mechanics and electromagnetism) laboratory works.

General Physics Laboratory - 235

Description:
Physics laboratory works are carried out for deeper knowledge of the basic laws of physics: performing them students learn to work with measurement devices and are introduced to measurement methods; they learn to depict methods as graphs and evaluate the reliability of the experimental results. Physics 2 (optics and atomic physics) laboratory works.

Laboratory works of material physics - 225

Description:
Laboratory works of material physics are carried out by the first year students of KTU Mathematics and natural sciences faculty, studying the module "Materials Physics", as well as fourth-year students of Computer science faculty who have chosen the module "Introduction to Materials Science".

General Physics Laboratory - 240

Description:
Physics laboratory works are carried out for deeper knowledge of the basic laws of physics: performing those students learn to work with measurement devices and are introduced to measurement methods; they learn to depict methods as graphs and evaluate the reliability of the experimental results. Physics 1 (mechanics and electromagnetism) laboratory works. Physics 2 (optics and atomic physics) laboratory works.

Device for multiplication of holograms

Description:
Device for multiplication of holograms

Laboratory of Vacuum science and Technique - 252

Description:
Laboratory of Physical Technologies Works are designed for deeper understanding of physical phenomena in various sensors, for improvement of skills in presentation and estimation of received data. The equipment for changing the magnetic field, temperature, electrical current, voltage, displacement values are used in these works. Measurements are carried out using ammeters, voltmeters, digital storage oscilloscope, thermocouple thermometers.

Physics demonstration during the lectures - 231

Description:
Physics test models focus to demonstrate the operation of the laws of physics, under certain conditions, a better understanding of the functioning laws of physics. Equipment is used in mechanical movements changes, heat flow, electrical and magnetic fields changes, a light beam dynamics, radiation measurement performing. Computer equipment, video camera and projector are used.

Process control stand

Description:
Process parameters (level, flow) measurement and control using Siemens SIMATIC S300 programmable logic controller. Stand for student training and practical research. (Studentų st. 50-164)

Signal and Spectrum Analyzer R&S FSW

Description:

A spectrum analyzer (2 Hz - 26,5 GHz ) measures the magnitude of an input signal versus frequency within the full frequency range of the instrument. The primary use is to measure the power of the spectrum of known and unknown signals.

Multi-channel low frequency ultrasonic phased array system „Dasel Sitau“ 32/128/2 (bandwidth from 0.03 up to 2 MHz, at -3 dB)

Description:
Multi-channel low frequency ultrasonic phased array system „Dasel Sitau“ 32/128/2 (bandwidth from 0.03 up to 2 MHz, at -3 dB)

R&S ESRP7 EMI test receiver

Description:

R&S ESRP is intended primarily for EMI diagnostic measurements during development as well as all measurements in the runup to product certification, and covers commercial EMI standards as well as military test specifications up to 7 GHz.

Air handling unit with direct-driven supply air and extract air fans.

Description:

Air handling unit with direct-driven supply air and extract air fans.

Stand of solid fuel properties testing. Test are performed acording EU standard

Description:
Stand of solid fuel properties testing. Test are performed acording EU standard

Hardness tester

Description:
Hardness tester

Scanning electron microscope

Description:
Scanning electron microscope

Stand of solid biofuel combustion research

Description:
Stand of solid biofuel combustion research

Stand of thermo physical characteristics of liquid fuel

Description:
Stand of thermo physical characteristics of liquid fuel

Stand of volatility charakteristics analysis

Description:
Stand of volatility charakteristics analysis

Stand of solid fuel combustion research

Description:
Stand of solid fuel combustion research

Gas concentrations and gas leakage rate determination equipment

Description:
Gas concentrations and gas leakage rate determination equipment

Combusion procuts components analyzer "MultilyzerNG``

Description:
Combusion procuts components analyzer "MultilyzerNG``

3D printer

Description:
3D printer

Products of combustions gas components analyzer

Description:
Products of combustions gas components analyzer

Dynamometry system TVM 5000N230N with dynamometer FL-1K

Description:
Dynamometry system TVM 5000N230N with dynamometer FL-1K

GENERAL PURPOSE STRAIN VIEWER (Ref. S-18)

Description:
GENERAL PURPOSE STRAIN VIEWER (Ref. S-18)

Rub fastness tester also called VESLIC IG/10/MOD (f. GIULIANI), Nr. 14279

Description:
Rub fastness tester also called VESLIC IG/10/MOD (f. GIULIANI), Nr. 14279

Stand of research for solid and liquid elemental composition

Description:
Stand of research for solid and liquid elemental composition

Plate bearing equipment with 100kN hydraulic system to perform the plate load test.

Description:

Apparatus is useful standard tool to determine the strain modula, and the bedding modula of soils and flexible pavements by repetitive loading.

Koala Deluxe Tehter

Description:
Koala is a mid-size robot designed for real-world application research. Bigger than Khepera, more powerful, and capable of carrying larger accessories, Koala has the functionality necessary for use in practical applications (like sophisticated battery management), rides on 6 wheels for indoor all-terrain operation, and sports stylish bodywork for attractive demonstrations. In addition to these new features, Koala retains a shape and structure similar to Khepera, such that experiments performed on Khepera can be migrated to Koala. The BIOS of both robots is compatible, permitting programs written for one robot to be easily adaptted and recompiled for the other.

6-axis mechanical scanner

Description:
6-axis mechanical scanner

Multipurpose industrial robot IRB 120

Description:
IRB 120 is the smallest multipurpose industrial robot developed by ABB and weighs only 25kg. This six degrees of freedom robot can handle payloads up to 3 kg and 580mm reach space. This mokomoasis stand with two ABB IRB 120 robot is designed for students to learn to manage ABB's industrial robots. Embodied robotics, automation and control, mechatronics, mechanical knowledge.ABB robot control program is compiled using the RAPID programming language. The robotic design, its technical features allow to solve various manipulation. objects in space problems.

Open system for medical echoscopy signals and images acquisition ULTRASONIX SonixTouch Research

Description:
Open system for medical echoscopy signals and images acquisition ULTRASONIX SonixTouch Research

Infiniium High-Performance Oscilloscope: 13GHz

Description:
Infiniium High-Performance Oscilloscope: 13GHz

Laser ellipsometer L115

Description:
Laser ellipsometer L115

picoammeter / bias source

Description:
picoammeter / bias source

Mask aligner and nanoimprint lithography

Description:
Mask aligner and nanoimprint lithography

Temperature indicator DTI 050 with temperature sensor STS-100

Description:
Temperature indicator DTI 050 with temperature sensor STS-100

Frequency counter U6200A

Description:
Frequency counter U6200A

Automotive diagnostics platform

Description:
The measuring and diagnosis module FSA 720 is the automotive diagnostics platform. The modular system structure permits connection to existing and new diagnostics systems for education purpose.

XRD: X-ray diffractometer D8 Discover, Bruker

Description:
X-ray diffractometer D8 Discover, Bruker

PC Sampling Oscilloscope PicoScope 9231A USB/LAN

Description:
PC Sampling Oscilloscope PicoScope 9231A USB/LAN

Mixed Signal Oscilloscope DLM2054

Description:
Mixed Signal Oscilloscope DLM2054 4ch, 500MHz BW, used to observe signals in electronic circuits.

Simulator of human physiological signals FLUKE ProSim 8

Description:
Simulator of human physiological signals FLUKE ProSim 8

Thermal imaging camera FLIR T650SC

Description:
Thermal imaging camera FLIR T650SC

Additional devices for RF experimental and modelling applications

Description:
Additional devices for RF experimental and modelling applications

ICP deep reactive etching system,

Description:
ICP deep reactive etching system,

Traffic counting equipment Viacount II-Bluetooth

Description:
Traffic counting equipment Viacount II-Bluetooth

Mobile robot Pioneer 3-AT

Description:
Mobile robot Pioneer 3-AT

Mobile robot system Robotino

Description:
Robotino is a mobile robot system with an omnidirectional drive, a learning system for basic and further training, and a research and development platform for universities and colleges, all in one system. Modularity means that all technical components of Robotino, such as the electric drive units, sensors and camera, can be directly understood and can also be learned within their integrated system behaviour. Trainees integrate and apply many technical features and functions, such as electric drive engineering, kinematics, sensors, control technology, vision systems and programming techniques.

Spectroscopic ellipsometer

Description:
Spectroscopic ellipsometer

Raman scattering spectrometer Renishaw in Via Spectrometer with accessories

Description:
Raman scattering spectrometer Renishaw in Via Spectrometer with accessories

Low temperature freezing chamber

Description:
Low temperature freezing chamber

Biophysiological signal acquisition and analysis system

Description:
Biophysiological signal acquisition and analysis system

Optical biological research and measurement equipment

Description:
Optical biological research and measurement equipment

Signal observation, generation and measurement equipment

Description:
Signal observation, generation and measurement equipment

Equipment for ultrasound excitation-reception

Description:
Equipment for ultrasound excitation-reception

Ultrasonic transducers-hydrophones set

Description:
Ultrasonic transducers-hydrophones set

Electric power quality analyser M12192

Description:
Electric power quality analyser M12192

Portable mobile system Noraxon for measurement of biomechanical parameters. Amplifier with Bluetooth interface with PC where software for data acquisition and processing is installed and a set of transducers

Description:
Portable mobile system Noraxon for measurement of biomechanical parameters. Amplifier with Bluetooth interface with PC where software for data acquisition and processing is installed and a set of transducers

Optical Motion Capture system for measurements and analysis of movements CONTEMPLAS (two digital videocameras, software for measurements and data processing)

Description:
Optical Motion Capture system for measurements and analysis of movements CONTEMPLAS (two digital videocameras, software for measurements and data processing)

Mobile robot and grab

Description:
Mobile robot and grab

microscope

Description:
microscope

Optical scanner Nextengine for reverse engineering

Description:
Optical scanner Nextengine for reverse engineering

Vibration system "TIRA 2000 N"

Description:
Vibration system "TIRA 2000 N"

High temperature electric tube furnace SNOL 7/1300L with E5CK control program

Description:
High temperature electric tube furnace SNOL 7/1300L with E5CK control program

Thin film deposition system BY-1 – deposition using evaporation by electric arc discharge

Description:
Thin film deposition system BY-1 – deposition using evaporation by electric arc discharge

Mobile multi-channel electronic PC measurement unit for parallel, dynamic measurement data acquisition using a computer for the measurement of various mechanical parameters

Description:
Mobile multi-channel electronic PC measurement unit for parallel, dynamic measurement data acquisition using a computer for the measurement of various mechanical parameters

AFM Scanning probe microscopy system JPK NanoWizard 3

Description:
Scanning probe microscopy system JPK NanoWizard 3

dynamic microhardness meter

Description:
dynamic microhardness meter

ENVIROMENT CHAMBER (WITH CO2 AND NOX GAS POSIBILITY)

Description:

Equipment according EN 13295; CO2 and NOx possibility and limits of regulation from 0 till 20% (accuracy ±0,5%);

Spectrum analyser

Description:
Spectrum analyser

Dynamic stiffness system "FR-DYPS3"

Description:
Dynamic stiffness system "FR-DYPS3"

Testing equipment for welded corners of windows

Description:
Testing equipment for welded corners of windows

Washability tester

Description:
Washability tester

Blower door equipment

Description:
Blower door equipment

Device for replication of holograms

Description:
Device for replication of holograms

Multi-channel ultrasonic phased array system „Dynaray“ 64/256 (bandwidth from 0.20 up to 25 MHz, at -6 dB)

Description:
Multi-channel ultrasonic phased array system „Dynaray“ 64/256 (bandwidth from 0.20 up to 25 MHz, at -6 dB)

vacuum evaporation unit

Description:
vacuum evaporation unit

Universal optical spectroscopy and laser microfabrications system

Description:
Universal optical spectroscopy and laser microfabrications system

Sensor Training stand TP-4000-Bs

Description:
Sensor Training stand for analog and discrete signal processing using a linear, angle turn, optical, proximity sensors. Investigated the strain gage force and torque sensor, set the nonlinearities. RTD tested position sensors. Tested optical position sensor and sets its properties.

Biomedical signal acquisition and analysis system BIOPAC BSLBME-W including 4 channel universal programable biosignal amplifiers, biomedical sensors and software.

Description:
Biomedical signal acquisition and analysis system BIOPAC BSLBME-W including 4 channel universal programable biosignal amplifiers, biomedical sensors and software.

Standard BOSCH sensor set

Description:
Standard BOSCH sensor set

Flexible manufacturing modeling stand

Description:
Flexible manufacturing simulation stand with Festo programmables controls. Programmable controllers managed system includes data processing and analysis of the transport conveyor, shafts and wheels assembly stations, CNC milling machines, CNC lathes, imaging camera. The entire control system over the network software is managed from the control panel.

Proceq GPR Live – Portable ground penetrating radar. Reinforcement finder

Description:

Max. depth range 70 cm; Operating temperature -10 to 50 °C; Frequency range 0,2 to 4,0 GHz