Description:
During the evaluation, the surface characteristics of precast concrete products (including unreinforced, reinforced, and prestressed products) and monolithic concrete structures installed on the construction site (including unreinforced and reinforced structures) are assessed based on their structur

Description:
Viscosity tests of cement mortar or concrete mixtures, performed using BTRHEOM laboratory equipment, allow for an accurate assessment of the mixture’s rheological properties: viscosity, thixotropy, flowability, and structural stability. These measurements help optimize the mixture’s composition.

Description:
It allows for the assessment of wood strength, moisture content, density, defects, and resistance to environmental factors. Laboratory tests help determine the reliability, durability, and suitability of structures for use in various areas of construction.

Description:
Environmental maintenance works include maintaining cleanliness and managing infrastructure. Various maintenance tasks are carried out, including minor environmental repair works. The safe and orderly use of laboratory areas is ensured.

Description:
Testing is carried out to determine the adhesion strength of coatings and their resistance to mechanical impact. During testing, the bond between layers and the substrate, potential defects, and compliance with technical requirements are evaluated, ensuring the quality and durability of the coatings

Description:
These are precise laboratory tests designed to determine the strength, elasticity, and load-bearing capacity of materials. The tests evaluate the properties of coatings, the tensile strength of steel, and compliance with technical standards to ensure the reliability and durability of structures.

Description:
Studies focused on the efficiency of construction work allow for an assessment of the quality of work organization, technological solutions, resource utilization, and cost management. This analysis helps optimize processes, reduce risks, increase productivity, and ensure the smooth implementation.

Description:
When defects appear in structures, it is necessary to conduct an expert structural assessment to determine the causes of the defects and their impact on the structure’s continued service life. Structural defects are usually of a technical nature (concrete, reinforcement, formwork).

Description:
includes methods that allow for the assessment of the condition of concrete, masonry, and other structures without damaging them. Measurements of strength, density, reinforcement placement, defects, and surface quality are performed to ensure the safety and reliability of the structures.

Description:
These are advanced solutions that include optimizing concrete mix designs, conducting laboratory tests, and using innovative additives. Tests are conducted on strength, durability, resistance to environmental factors, and structural properties.

Description:
Determining the amount and orientation of steel reinforcing fibers in fresh and hardened concrete makes it possible to assess the distribution and orientation of the fibers and the actual effectiveness of the reinforcement. The tests are conducted using modern measurement methods.

Description:
It allows for the evaluation of the physical, mechanical, and performance properties of materials, as well as the quality of surface coatings. The adhesion of paints, resistance to environmental factors, coating thickness, and durability are analyzed to ensure the reliability and adequate protection

Description:
Construction mortars are very commonly used in flooring projects. For example, leveling compounds provide an ideally smooth base for laying various floor coverings on top of them.

Description:
This is a comprehensive process during which environmental factors—such as temperature, humidity, air quality, noise, vibrations, and lighting—are measured and analyzed. These studies help assess the impact of the environment on human health, equipment performance.

Description:
Durability testing of samples is performed to determine material resistance to environmental impact, loads, and aging processes. The evaluation focuses on physical, chemical, and mechanical changes, helping to assess product service life and suitability for long-term use.

Description:
This includes an analysis of the quality of the concrete mix, placement, compaction, surface treatment, and installation of the finish. The assessment determines whether the construction processes comply with design and standard requirements, ensuring the durability and performance characteristics.

Description:
This allows for the evaluation of the strength, stiffness, deformation properties, and load-bearing capacity of materials and components. Tensile, compression, bending, shear, and other tests are conducted to determine the reliability and durability of structures.

Description:
Research into continuous concrete placement technologies for massive monolithic structures involves the analysis of concrete mix properties, heat release, the hardening process and technological parameters. The suitability of the mix for long-term pouring, interlayer adhesion.

Description:
This is an advanced, non-destructive testing method that allows for the precise detection of internal defects in materials: flaws, cracks, fissures, pores, or delamination. High-frequency ultrasound is used to assess the quality, reliability, and safety of structures.

Description:
Measuring autogenous and drying shrinkage and deformation allows for an accurate assessment of concrete behavior during hardening by monitoring changes in volume and the development of stresses. Tests conducted under different curing conditions help determine the stability of the mixture.

Description:
Tests on flexural structures make it possible to evaluate the resistance of structural members to bending loads, determine their strength, stiffness, and deformation characteristics, and assess the crack propagation process. Laboratory tests help to accurately assess the behavior of structures under

Description:
Tests on masonry products are conducted to assess the quality of bricks, blocks, and other masonry elements, as well as their compliance with standard requirements. During these tests, the products’ compressive strength, density, water absorption, dimensional accuracy, frost resistance.

Description:
The development of next‑generation concrete mixes involves selecting advanced binders, mineral additives and chemical modifiers to optimize hydration processes, rheological behavior and microstructure formation. Such compositions reduce clinker content while improving concrete density, pore struct

Description:
This includes the design of unique formulations tailored to specific operating conditions: high strength, resistance to chemicals, heat, cold, or abrasion. Comprehensive laboratory testing is conducted to evaluate rheology, strength, durability, and structural reliability.

Description:
Electronic moisture measurement allows for the precise determination of moisture content in various building materials and surfaces: concrete, plaster, masonry, wood, and insulation systems. Modern sensors are used to assess the condition of materials and the drying process.

Description:
These are active mineral components, such as silica fume, fly ash, and other reactive additives, that improve the strength, density, and durability of concrete. They reduce porosity and increase resistance to freezing, chemical exposure, and deformation, ensuring high quality.

Description:
This measurement allows for quick and accurate determination of moisture levels in concrete, plaster, masonry, wood, and other building materials. Electronic measuring devices help assess the drying process, identify areas of high moisture, and ensure appropriate conditions for further construction.

Description:
Aggregate testing includes determining particle size distribution, moisture content, density, fineness modulus, friability, and organic impurities. The data obtained allows for an assessment of the suitability of aggregates for the production of concrete, mortar, and other mixtures.

Description:
Tests on building materials and structures are conducted to assess their quality, durability, and compliance with technical requirements. The tests examine mechanical properties, structure, and resistance to environmental factors, and identify any potential defects or damage.

Description:
It allows for the evaluation of the rheology, strength, durability, and sustainability of mixtures. The research helps optimize the composition, reduce the carbon footprint, and develop more efficient, environmentally friendly cement products.

Description:
This involves the application of advanced technologies, the optimization of mixtures, and the search for sustainable solutions. The research conducted enables the development of environmentally friendly products with high performance characteristics and their effective integration into construction.

Description:
An assessment of the impact of digitalization in the construction sector on building design review processes involves an analysis of digital technologies, BIM models, data management, and process automation. The assessment examines how digital solutions increase accuracy and reduce the risk of error

Description:
include the evaluation of fresh mixture consistency, workability, setting behavior, strength development, and durability indicators. Laboratory analyses help determine material quality, performance under various conditions, and suitability for construction or manufacturing applications.

Description:
It involves an analysis of historical, architectural, structural, and environmental aspects. The condition, authenticity, valuable characteristics, and preservation potential of the site are assessed in order to ensure well-founded decisions regarding its management, protection and use.

Description:
This involves determining the physical, mechanical, and geotechnical properties of soil in order to assess its composition, strength, density, moisture content, compressibility, and bearing capacity. These tests are essential for the design of foundations, utility networks, and other structures.

Description:
includes the evaluation of physical, mechanical, structural, and durability properties. Tests determine strength, moisture content, density, defects, biological resistance, and performance under various environmental conditions, supporting quality control and material optimization.

Description:
This test is performed to determine the strength, modulus of elasticity, elongation, and yield strength of steel reinforcing bars. The test allows for an assessment of the quality of the reinforcing bars, their compliance with standards, and their suitability for use in reinforced concrete structure

Description:
These are non-destructive and destructive testing methods that allow for the assessment of the strength, density, layer structure, and condition of concrete or other materials based on drilled cylindrical samples. This testing is essential for the accurate diagnosis of structures, quality control.

Description:
This includes laboratory tests to evaluate the strength, density, and structure of concrete and reinforcing steel, as well as their compliance with design and standard requirements. These tests are conducted to ensure the safety, reliability, and quality control of structures.

Description:
It enables the accurate and rapid production of prototypes, engineering models, and technical components from a variety of thermoplastic materials. MakerBot technology ensures high print quality, dimensional accuracy, and reliability, making it suitable for both research and practical engineering.

Description:
Includes an assessment of the effects of admixtures on the properties of concrete mixtures: workability, setting time, strength development, water absorption, and durability. The tests help determine whether the admixtures are compatible with one another and suitable for use in specific concrete.

Description:
This involves evaluating the physical, thermal, and mechanical properties of the mixture. Density, strength, thermal conductivity, water absorption, and structural integrity are determined in order to assess the material’s suitability for energy-efficient structures.

Description:
includes an assessment of the properties of the concrete mix, the movement patterns of the formwork, the hardening processes, and the quality of the structure’s formation. These tests help determine the technology’s effectiveness, safety, and compliance with design requirements.

Description:
Includes the evaluation of the properties of fresh and hardened mortar: workability, setting time, density, strength, water absorption, and adhesion. The tests are conducted to determine the quality of the mortar, its suitability for use, and its compliance with standard requirements.

Description:
includes an assessment of concrete’s resistance to wear, abrasion, impact loads, and surface damage. The tests are conducted to determine the concrete’s durability, suitability for heavy loads, and compliance with standard requirements.