MIDF

 Tribological analysis of elements and materials, development of methods for reliability improvement

Description:
Tribological analysis of elements and materials, development of methods for reliability improvement Tribological analysis of elements and materials, development of methods for reliability improvement Tribological analysis of elements and materials, development of methods for reliability improvement

Improvement of technological process management

Description:
Geometric measurements are performed for individual parts and assemblies of various materials, shapes, and complexity, providing detailed tolerances and accuracy reports. Using advanced scanning technologies, a digital 3D model of the component is created.

Design of mechanical systems

Description:
We design mechanical systems, taking into account technical, functional and production requirements. We prepare 3D models, technical drawings, perform structural calculations and select optimal engineering solutions.

Creation and preparation of ShopMill milling programs for milling on the DMU 35 machine

Description:
Creation and preparation of ShopMill milling programs for milling on the DMU 35 machine. Creation and preparation of ShopMill milling programs for milling on the DMU 35 machine. Creation and preparation of ShopMill milling programs for milling on the DMU 35 machine.

Development and research of new products for scanning, transmitting and storing information

Description:
Rezultate bus sukurtas gaminio (valdiklio) prototipas, atliktas jo išbandymas kaupiant, saugant ir perduodant nuotoliniu būdu duomenis, sukauptus iš energetinių resursų apskaitos prietaisų. Rezultate bus sukurtas gaminio (valdiklio) prototipas, atliktas jo išbandymas kaupiant, saugant ir per

 Analysis of dynamics of rotary systems and diagnostics, failure prevention

Description:
We perform rotor dynamics analysis, condition diagnostics, and develop fault prevention measures. We identify rotor imbalance, misalignment, and bearing or gear defects. We help prevent catastrophic failures and extend equipment service life.

Qualitative evaluation of printing plates of different printing ways

Description:
Dimensional control of discrete elements of printing forms. Determination of hardness of polymer printing forms. Determination of hydrophilicity/hydrophobicity of printing forms.

Prototyping and digital manufacturing

Description:
Prototyping and fabrication of products, components and experimental solutions in D-Lab laboratories. Available capabilities include robotic CNC machining, polymer and clay 3D printing, experimental material processing and prototype testing.

Determination of aerodynamics and flight dynamics of aircraft and unmanned aerial vehicles (UAV)

Description:
Aerodynamic analysis of aircraft and unmanned aerial vehicles (UAVs) using panel methods and computational fluid dynamics (CFD). UAV structural prototyping, evaluation of design solutions, flight testing, and analysis of flight test results.

Determination of aerodynamic characteristics by conducting tests in a wind tunnel

Description:
Aerodynamic testing in a low-speed wind tunnel at airflow velocities of 4–60 m/s. Services include force and pressure measurements, flow visualization, model adaptation for testing, and recommendations for improving aerodynamic performance.

Feasibility study in the field of applied research and experimental development in the textile sector

Description:
A feasibility study is being conducted in the specific field of textile material research, application, or the development of materials with new functional properties, alongside an analysis of the company's capacity to manufacture a new product or material.

Feasibility study of the application of high-frequency vibrations in improving technological processes

Description:
Thermal treatment and heating of materials and raw materials are performed in the temperature range from 50 °C to 1100 °C in an air atmosphere using the high-precision laboratory electric furnace SNOL 7.2/1100 L. The service is intended for scientific research, material property evaluation, proces

Simulation of computer-generated holograms on the basis of 2D digital photos

Description:
Holograms are widely used in scientific research, medicine, commerce and industry. This technique allows you to create complex holograms from 2D images, which, when interacting with laser light, carry certain information. These holograms can be used from document security to micro-opto-electromechan

Design of mechanical and other systems, technical products and their technologies

Description:
We design mechanical systems, taking into account technical, functional and production requirements. We prepare 3D models, technical drawings, perform structural calculations and select optimal engineering solutions.

Technical expertise of technological lines and other technological systems according to functionality, reliability, durability, speed and other criteria

Description:
We provide technical expertise and assessment of technological lines and other technological systems, evaluating their functionality, reliability, durability, operating speed, performance, and other technical and operational criteria.

Product and service design

Description:
Design of products, services and product-service systems: from analysing needs and existing solutions to concept development, user experience and more sustainable business model solutions. The KTU-developed CircuLoop methodology may be applied.

Robix Rascal robotics kits for teaching

Description:
A training program has been prepared to introduce robot models using the Robix Rascal construction kits. During the program, you will be introduced to the construction and programming capabilities of the Robix Rascal, and during practical sessions you will have the opportunity to apply the acquired

Design improvement of an intraosseous dental implant assembly with an internal conical connection.

Description:
Design improvement of an intraosseous dental implant assembly with an internal conical connection. Design improvement of an intraosseous dental implant assembly with an internal conical connection. Design improvement of an intraosseous dental implant assembly with an internal conical connection.

Brand and User Experience Design

Description:
Creation or renewal of a brand, visual identity and customer experience. The service covers positioning, value proposition, visual identity and the design of key customer touchpoints with the brand.

Determining the service life of the carrier basket

Description:
Determining the service life of the carrier basket. Determining the service life of the carrier basket. Determining the service life of the carrier basket. Determining the service life of the carrier basket. Determining the service life of the carrier basket. Determining the service life of the carr

Implementation of technological quality improvement methods

Description:
Implementation of technological quality improvement methods. Implementation of technological quality improvement methods. Implementation of technological quality improvement methods. Implementation of technological quality improvement methods.

Improvement and development of mechanical production technologies

Description:
The parameters of mechanical production processes (efficiency, quality, etc.) are studied, and recommendations for their improvement are formulated. The parameters of mechanical production processes (efficiency, quality, etc.) are studied, and recommendations for their improvement are formulated.

MEMS and MOEMS applications

Description:
Research on MEMS and MOEMS applications. Research on MEMS and MOEMS applications. Research on MEMS and MOEMS applications. Research on MEMS and MOEMS applications. Research on MEMS and MOEMS applications. Research on MEMS and MOEMS applications.

Development of new products and technologies applying rapid prototyping

Description:
Developing a new products or manufacturing technologies is a time-consuming process. However, by applying additive manufacturing principles and technologies, this time can be shortened, and the product can be delivered to market much faster.

 Metallographic analysis of structural materials, determination of structures and composition

Description:
Following tasks can be performed: preparation of samples for microstructural analysis; microstructural examination with an optical microscope or SEM, determining the main phases, defects (non-metallic inclusions, cracks); fracture examination; hardness HRC, HV measurement, scratch test for coatings,

 Development of thermal processing and metal casting technologies

Description:
Thermal, thermo-chemical, thermo-mechanical processing technologies of metals and alloys are analyzed and improved, and casting and welding technologies are consulted. A technical feasibility study is prepared for the application of thermal treatment or casting technological processes in the company

Development of innovative products and processes, analysis of their cots, value and productivity in an early stage of development

Description:
Systematic analysis of the production process and evaluation of performance indicators to determine the situation of the process or unit. If required, a methodology for assessing manufacturing productivity is developed or adopted.

Technical consultation on mechanical system vibrations, vibration monitoring and vibroacoustic diagnostics in practice

Description:
Measurement and testing of mechanical system vibrations and environmental acoustic noise parameters, as well as evaluation of the technical condition of mechanical systems based on vibration and acoustic noise characteristics.

Tests of temperature in a climatic chamber

Description:
We perform temperature testing of products and materials in a climate chamber, evaluating their resistance to heat, cold, and temperature fluctuations.

Difraction efficiency measurements of periodic microstructure and estimation of geometric parameters using developed numerical-experimental method

Description:
This methodology allows for indirect evaluation of mechanical, geometric and optical parameters of periodic microstructures, for which traditional measurement methods are not suitable. This methodology can be applied to optimization and control of technological processes. The result is the dependenc

Design of heating systems and district heating substations

Description:
The result would include hydraulic and electrical diagrams, components, calculation protocols and other components of the project (pages 40-50). The project would be coordinated with the necessary institutions.

Computer modeling and numerical analysis of cutting processes (turning, milling, drilling, etc.)

Description:
Computer modeling and numerical analysis of cutting processes (turning, milling, drilling, etc.). Computer modeling and numerical analysis of cutting processes (turning, milling, drilling, etc.). Computer modeling and numerical analysis of cutting processes (turning, milling, drilling, etc.). Comput