Description:
High-power LEDs for lighting and power supply efficiency tests, the development of set parameters controlled LED power supply. Infrared LED transmission control methods and implementation. LED power supply design, computer simulation. Layout creation, experimental study, analysis of the results. Prototype.

Description:
All modern intelligent electronic systems are based on microcontrollers and sensors that “sense” the environment. Managed (interactive) temperature, humidity, magnetic field, position sensors are developed and applied.

Description:
Modern medical practices using large amounts of electronic equipment produced by different manufacturers at different times, so there are hardware integration and monitoring problems. Carried out a range of electronic equipment into a single system for feasibility studies.

Description:
Hardware and software solutions of different measurement systems are proposed. If the measured object is in the legal metrology field, the calibration and verification techniques are developed and validated, as well as hardware and software for automated calibration and verification.

Description:
Research is in the topic of cyber security. However, attention is paid to cyber safety, prevention of possible attacks and forecasting issues. It addresses the challenges associated with the device identification using radio frequency identification technology. Radio electronic unmanned aircraft safety issues are solved. Process automation, computerized systems development, POSIX systems programming are ongoing.

Description:
Transport flow modelling and rapid flow adjustment methods, using a variety of algorithms and tools for assessing different types of transport, traffic conditions and road types.

Description:
Sonoporation ultrasonic generator/system for drug/gene incorporation into living cells. With sonoporation help cell wall permeability can be briefly increased, thus enabling of the insert of DNA or chemicals to the cells inside. Many years of experience in electronics design and ultrasound studies. Experience in ultrasonic signal processing methods to quality assessment of sonoporation.

Description:
Ultrasonic transducers/pixel quality verification is particularly relevant in medical diagnostic equipment. Quality is defined by the electric/acoustic performance. Many years of experience in electronics design and ultrasound studies: an ultrasonic pulse generator excitation; making low noise amplifier; signals collection systems. Experience in signal processing methods designed for accurate propagation time, speed, damping and other parameters for measurement. Our projects include: ultrasonic liquid flow measurement, ultrasonic thickness measurement of composite materials visualization system, the polymerization state measurement.

Description:
Ultrasound in medicine can be used for therapeutic or diagnostic purposes. Electronics quality is important in terms of effectiveness, safety and electromagnetic compatibility for the certification of such systems. Electronics design, project quality/performance assessment, electromagnetic compatibility analysis, consultations. Many years of experience in electronics design and ultrasound studies: an ultrasonic pulse generator excitation; making low noise amplifier; signals collection systems. Experience in signal processing method is designed for accurate propagation time, speed, damping and other parameters for measurement. Our projects include: ultrasonic liquid flow measurement, ultrasonic thickness measurement of composite materials visualization system, the polymerization state measurement.

Description:
Human gestures recognition and the practical use of the man - machine control systems development and research. It is also possible to control characters, fixed postures or gestures dynamic tests. Recognition Using Hidden Markov chain model, random trees sets classification, artificial neural networks, etc. The best method or combination of methods for selection by the identification of qualitative parameters. The possible result - the scientific feasibility study on the creation of an algorithm or a trial version of the program. Possible fields of application: mobile robot control, industrial control devices or applications management and so on.

Description:
System for remote instalation control of the fiber-optic access networks (study).

Description:
While developing modern electronic systems there is a need to model, simulate them with specialized software. This allows to test the capabilities of such systems. After systems implementation a variety of electronic properties such as efficiency and so on can be explored.

Description:
System for remote control of the fiber-optic access networks (software tool)

Description:
Depending on the observed object, it can be very different systems, such as heavy vehicles operating or human condition monitoring system. The service and its description is correlated with the service provided by "Remote control of mobile objects (technical feasibility study)”. Services rendered result - will create a software tool that will allow to remotely (via the Web) track objects according to the data collected from the sensory systems (implemented data collection, remote transmission and display). Also, this tool will realize some of the observed object management functions.

Description:
Using the technological process knowledge production processes and equipment control algorithms and their performance is simulated using the software simulation software and possibly realized in real hardware and algorithm validation is performed

Description:
Smart energy-saving technologies research and technological development, feasibility studies. Studies of solid-state lighting, wiring and network diagnostics, monitoring and accounting systems for the application in the energy efficiency.

Description:
A variety of technological and financial management processes required for decision support systems development based on advanced technologies for the development of such systems ranging from machine learning as well as expert knowledge formalization.

Description:
The biggest problem of wireless monitoring and management systems is a limited battery life. There is a need to change the batteries. It's expensive, and sometimes impossible. Intelligent, interactive Ultra Low Power sensors and control systems are created.

Description:
Modern medical practices using large amounts of electronic equipment produced by different manufacturers at different times, so there are hardware integration and monitoring problems. Creating a user-friendly interface to facilitate the work of doctors and ensure patient safety.

Description:
Wireless GSM-based operating units have the disadvantage that the batteries serve for a limited time. Intelligent, interactive Ultra Low Power Sensors and control systems operating up to 100 days without charging the battery are being created.

Description:
We can carry out the LED lamps or similar devices parameters and service life tests, electromagnetic compatibility control in accordance with the approved methodology. Energy efficiency, light aging and fault identification causes or reliability enhancement studies and make recommendations.

Description:
Software tests of measuring instruments and measuring systems, conformity assessment for WELMEC 7.2 requirements.

Description:
The development and research of Internet Of Things systems for precision agriculture, energy accounting and process parameters monitoring. Sensor and actuator connection to the Internet of Things (IOT).

Description:
When designing the foundations of the buildings the nature of the ground must be identified, soil, taken from a borehole mechanical characteristics examined. Some investigations (eg. compression test) take up to 2 days. Developed sensors, controllers and hydraulic system allows automated test simultaneously perform several different studies. The human factor is thus eliminated, the report promptly prepared, tests price falls

Description:
The service and its description is correlated with the service, "the company's economic performance optimization options analysis by the LEAN system (technical feasibility study). Preparation of feasibility studies, where the principles of Lean System for enterprise business process optimization. Software tool is a modular structure. A multi-purpose modules consists of specialized databases, presenting the user a variety of data. Various statistical reports are generated.

Description:
Design and research of specialized energy-efficient electronic systems, including those powered by batteries and wireless networks for measurement, data collection, accounting, technical diagnostic systems.

Description:
This service is correlated with “Mobile objects remote control system (software tool)”. Services rendered result - a technical feasibility study, evaluating a variety of mobile objects (vehicles operating or the patient's) condition monitoring capabilities in real time, control algorithms and possible control measures (technological solutions).

Description:
The service and its description is correlated with the service, "the company's economic performance optimization options analysis by the LEAN system (technical feasibility study). Preparation of feasibility studies, where the principles of Lean System for enterprise business process optimization. Software tool is a modular structure. A multi-purpose modules consists of specialized databases, presenting the user a variety of data. Various statistical reports are generated.

Description:
All modern intelligent electronic systems are based on microcontrollers and sensors that “sense” the environment. Managed (interactive) temperature, humidity, magnetic field, position sensors are developed and applied.

Description:
Designing of high-rise buildings foundations not only the nature of the ground must be identified. We developed systems for static earth sensing, twinning pressure and soil stratigraphy.

Description:
The data about technological processes collection, transmission and remote imaging hardware and software. Enterprise document management system with electronic signatures, automatic transmission of the document formed entity specified functions.

Description:
Equipment or its individual parts diagnostic techniques, methods and algorithms are developed for device functionality increase. These algorithms based software implementations allow to extend equipment life and ensure the safety and operation in compliance to technical standards.

Description:
Discrete and continuous processes in production mathematical models, using classical and modern methods and algorithms. These models realization, ongoing simulation is performed using Matlab simulation packages, Centaurus and IEC 61131-compliant controller programming software packages

Description:
Creating adaptive concrete and asphalt mixtures production management systems (hardware and software) that performs automatic liquid chemical additives, fillers and inert materials dosing stabilizing the W/C ratio. Experience with systems of 14 manufacturing companies.

Description:
Setting optimization goals and opportunities, defining hardware and software tools to realize these goals. Objectives pursued - energy and economic efficiency, safety and ecology. Applying various optimization techniques and criteria by mathematical modelling.

Description:
During the intensive development of mobile radio network quality coverages rating, station construction sites selection and design, the most important communication parameter calculations or measurements is relevant. The calculations are carried out using GIS tools, for measurements, if there is a functioning network - TEMS or similar specialized tools.

Description:
Opportunities to create a user-friendly application that will help users of smartphones to automatically and correctly make certain settings on your smartphone, to timely activate defined functions. Smart phone user does not need to know phone configuration features, answers to the interactive questions are enough. The study will be carried out in the most popular smartphone operating systems (Android, iOS, Windows) and their composite analysis software modules as well as the specific functionality of the activation of the program code of the Android OS environments.

Description:
The service and its description is correlated with “WiFi access cyber security research”. Expected results of the project - will create about 120-150 p. technical feasibility study, which will be submitted to the WiFi device identification system for architectural concept of cyber threats reduction, based on radio frequency identification traces of the application form requirements for WiFi access control system and the establishment of such a system specification. There will also be a universal method for the Wi-Fi equipment identification automation, providing access to a wireless Wi-Fi network, and the methodology to obtain the result is a real WiFi network that will be used to formulate the requirements to prototype WiFi network access control system.

Description:
The service and its description is correlated with “WiFi access cyber security control system”. Expected results of the project - to be evaluated in a variety of analytical models to application of Wi-Fi devices for identification, an analytical model for informative spectrum and impedance characteristics that will allow the identification of different WiFi network devices, as well as the assessment of the adequacy of the model based on empirical data.

Description:
Creating programmable algorithm based on conventional electric wheelchairs gaining sophistication. For example avoid various obstacles, according to the GPS coordinates traveling from point A to point B and understand multiple management interfaces.

Description:
A technical realization study of various levels of existing industrial control systems security and modernization that helps to determine the weak and strong points, provides recommendations and possible solutions to improve the situation.

Description:
Preparation of technological documentation according to various production processes rules, standards and guidelines, which defines production processes and management systems and their installations, corresponding to safety and environmental requirements.

Description:
Using computer vision algorithms and expertise human faces identification and detection methods are created.

Description:
Using computer vision algorithms and expert knowledge high speed point of care registration system is developed, which can not only manage the devices connected to the computer and but any programs as well. Intelligent visual tracking systems are often used for marketing purposes, when you want to explore the user's reaction to a new product design.

Description:
The assessment of high voltage equipment insulation reliability, taking into account the partial discharges initial level and the application of advanced diagnostic, measurement and data analysis techniques for continuous monitoring partial discharges describing the characteristics of the change in the various grid structures and devices. To achieve this, new measurement methods, their functionality enabling technologies and data analysis algorithms are developed.

Description:
The rotating magnetic field device model, measured parameters, the optimal structure research. Services rendered result - the rotating magnetic field device model, the parameter analysis, recommendations of the rotating magnetic field device design optimization.

Description:
Low-frequency electromagnetic fields modelling and conducting field measurements of parameters. Electromagnetic field distribution in the devices and near investigation in order to optimize their designs or detect dangerous locations near powerful electric or magnetic field radiation. Services rendered result - the installation or design model, the parameters of the electromagnetic field distribution patterns.

Description:
The feasibility study evaluating embedded systems development and application to a specific transport. The type of the embedded system and what data collection, transmission and processing ways are the most effective are examined.

Description:
Advanced medical and electronics engineering research application for early diagnosis and treatment. Biomedical devices and diagnostic tools development and testing. Dental pulse oximeter operating characteristics determination, model creation and testing, testing of specialized dental sensors mechanical and electrical characteristics, layouts of the sensors are designed and tested. Sensor design, drawing preparation and printing with 3D printer.

Description:
Ultrasonic systems, ultrasonic measurement equipment, ultrasonic measurements, flow measurement, ultrasonic evaluation of material properties, ultrasound electronics, ultrasonic pulser, ultrasonic preamplifier, signal processing, non-destructive testing, industrial measurements, contract research and development

Description:
Blood gliucose level can be estimated using ultrasonic/electrical/light parameters or their combinations. Knowledge on ultrasonic equipment design, impedance measurement, signal processing, contract research and development.

Description:
Ultrasonic application for food safety research. Studied fruit / cereals / grains / flour / dough / pastries / cheese / other foods ultrasonic parameters (attenuation / propagation speed / acoustic nonlinearity / reflection / access factor) relationship with food grade / quality characteristics. With ultrasound these properties can be measured in a non-invasive manner, ensuring constant food quality / characteristics of brand monitoring / production processes.

Description:
Quality of the solid state light source driver is defined by output current, voltage stability, attainable pulse durations, rise, fall slew rate. Depending of LED or laser, power requirements are different. Research and development is offered and existing systems quality evaluation, feasibility studies.

Description:
Vehicle video information systems and feasibility studies. Video Information System to provide a visual (graphical, textual and video) information to the flow or the rally competitor. Screen size can be very small (HUD: virtual instrument panel) or very large when this is a large outdoor sign advertising scoreboard or a graphic display of the result. The result will be the technical feasibility study - research analytical work, assessing the task realization technical and technological possibilities, recommendations targets for parameters essential aspects.

Description:
Video information system designed to provide a visual (graphics, text or video) information from the instrument panel to the very large outdoor and indoor displays. We prepare feasibility studies and fully completed projects suitable for mass production.

Description:
Remote visual registration systems and expertise

Description:
Electronics production process final stage is their FW programming, calibration and functional testing. The latter includes the creation of the testing methods, the formation of stimuli, reaction processing and formulation of the decision qualitative classification. We develop mechatronic systems for these procedures to be performed automatically in middle and high-throughput production. Experience in developing similar systems in Italy, UK, German and Lithuanian companies.

Description:
Electronic Systems Project Quality Rating: schematic, topological and constructive decision analysis, evaluation, advice, solutions. Process systems for electromagnetic compatibility (EMC) feasibility studies. System EMC analysis, recommendations to combat interference, technical and technological solutions options analysis. System or node technological possibilities realization, recommendationsfor parameters. Environmental analysis of electromagnetic compatibility, technical and technological solutions to combat interference implementation, analysis.

Description:
The service and its description is correlated with the service, “Innovative maintenance system for vehicle park (technical feasibility study)”. Technical feasibility study establishes requirements for vehicle maintenance system and criteria for evaluation of the technical condition of the car. Software created by the Windows operating system for computers is obtained thanks to various real-time and reference information about the vehicle's operating situation, just after entering the vehicle license plate number (created through the graphical user interface (Web)): technical passport; data on the movement of the vehicle (speed of movement, the location of the movement history); consumables and spare parts replacement necessity; warning function of the necessary technical maintenance work; Various reports on the movement route and speed, technical maintenance and service operations.

Description:
We design automatic mechatronic systems for brake traction control, as well as for delay time assessment in the pneumatic brake systems in accordance with EU regulations.

Description:
Smart remote lighting control devices, the parameters measurement and status monitoring systems are developed, which individualy to the required profile and adaptively from external lighting level are controlling light sources through the Internet network, and assess the cost of electricity in tracking their history, which further seeks to ensure: 1. continuous lighting source state control and reliability of the assessment process; 2. The function of analysis to power supply matching set value and automatic alarm notification when generated power changes; 3. The electricity supplier's recommendations tracking option; 4. The confidence indicator forming option; 5. The synchronized distribution functionality for individual indoor light sources option; 6. authenticated management access and wireless encrypted command option; 7. The option of changing the encryption key; 8. The increasing the set switch-off phase, and a source extension of working time; 9. The power control source transfer characteristics straightening option; 10. The use of the operating mode based on a positive use history.

Description:
The development of software tools, testing and adjustment. Purchase and Sales modules consist of specialized data bases. The system provides a variety of data (eg., components and raw materials to the specifications for electronic products, suppliers/customers lists, and so on.). Procurement module generates unique order number, give the minimum possible to order specific components, the minimum package size, price, payment terms, delivery times and so on to the customer. Specific functions of the system and realized sales module: the list of customers, orders and settlement with the company information, and so on.

Description:
The service and its description is correlated with the service, “Innovative maintenance system for vehicle park (technical feasibility study)”. Technical feasibility study establishes requirements for vehicle maintenance system and criteria for evaluation of the technical condition of the car. Software created by the Windows operating system for computers is obtained thanks to various real-time and reference information about the vehicle's operating situation, just after entering the vehicle license plate number (created through the graphical user interface (Web)): technical passport; data on the movement of the vehicle (speed of movement, the location of the movement history); consumables and spare parts replacement necessity; warning function of the necessary technical maintenance work; Various reports on the movement route and speed, technical maintenance and service operations.

Description:
Management systems which realize optimal processes are researched and designed using experiment theories, processes mathematical modelling and optimization techniques and continuous process parameters and modes of optimization tasks criteria research are carried out.

Description:
Contactless object parameter measurement using visual information is provided from two-dimensional images, or videos, or three-dimensional images obtained by Kinect or other similar types of sensors. Identification from the two-dimensional images can be used for detection of surface defects (cracks in the asphalt, aircraft surface irregularities, etc.). Using an additional light source and the design of the known forms of light signal when recording in the facilities, according to the received video footage template, light distortions identify objects dimensions, defects or discrepancies to the template. The possible result - the scientific feasibility study on the creation of an algorithm or a trial version of the program. Possible fields of application: a conveyor manufacturing production control, aircraft, road inspection and defect detection, multimedia or the like.

Description:
Using basic knowledge, experiments and expertise mathematical models of processes are being developed. Models are adapted to process optimization, monitoring, control and error analysis.

Description:
All places of mass gathering, intense nodes have an increased risk for potential emergency situations, which is solved by traffic flow management system. Research for the sensors and algorithms for detection of vehicles, their size, direction of travel and speed identification.

Description:
Development and research of the high-speed electronic systems, based on programmable logic (FPGAs) and digital signal processors (DSP). Systems for digital modulations, measurement and diagnostic signal processing and etc.

Description:
Using visual information and artificial intelligence methods for identification of objects from two-dimensional or three-dimensional paintings. Object detection image according to common traits - a man, a cat, a dog, a car, numbers, letters, or the like. It is also possible to detect moving objects such as a specific person or object recognition. Recognition of weather phenomena - rain, snow, etc. The possible result - the scientific feasibility study on the creation of an algorithm or a trial version of the program. Possible applications include: security monitoring system to accompany the special services, products or secondary materials separation, etc.

Description:
Signal collection systems / nodes, consultations. Filters, Attenuators operated amplifiers, multi-channel data collection, and transmission. Signal collection system - an integral part of flexible manufacturing technologies. Used both for designing, debugging stage, when it is necessary to evaluate the properties of the prototype and the actual operation, when it is necessary to control and manage the process (eg.: radio / navigation system ultrasound; high dynamic range signals an alarm and recording system for bulk liquid products accounting system; physical material parameters of the measuring system defect detection system). Our projects include: a radio navigation system; Ultrasound navigation system; high dynamic range signals an alarm and recording system.

Description:
An embedded system, which is the main part of a microprocessor or microcontroller, is a part of many products. Creating such systems ranging from establishing a concept to prototype, including software and hardware. Many years of experience in the development and implementation of such systems in the EU countries.

Description:
The application of situational management methods based on expert evaluation, carried out the installation of electronic technology efficiency rating forecasts. A specialist intelligence is used as a measuring measure. Carry out expert evaluations collection, primary processing and aggregation, evaluating each expert's level of expertise. Calculate electronic technology complex installation efficiency.

Description:
Passenger transportation quality assessment based on driving time of dynamic characteristics measurements. Dynamic performance measurements using accelerometers, gyroscopes, magnetometers and GPS sensors. Measured characteristics are processed and used for driving quality characterizing feature extraction and transport quality index determination.

Description:
The service and its description is correlated with the service "Control system for residential buildings for operation and maintenance (technical feasibility study). Technical feasibility study addresses requirements for innovative residential building maintenance control system. Through a Web interface (accessible via the company's web page) remote users can declare various home systems induction counters, register faults. The system provides building maintenance administrator relevant data relating to the operation of the building. According to the failure priority system makes troubleshooting schedule, generates warning (alarm) functions for critical failures and various reminders, the required operational functions, eg., the state of building constructions (walls, foundation and roof) assessment, home systems (electrical, thermal point , hydraulic and others.) testing and so on. Generates various statistical reports. By default, the ability to easily update specialized databases is implemented.

Description:
The service and its description is correlated with the service "Control system for residential buildings for operation and maintenance (technical feasibility study). Technical feasibility study addresses requirements for innovative residential building maintenance control system. Through a Web interface (accessible via the company's web page) remote users can declare various home systems induction counters, register faults. The system provides building maintenance administrator relevant data relating to the operation of the building. According to the failure priority system makes troubleshooting schedule, generates warning (alarm) functions for critical failures and various reminders, the required operational functions, eg., the state of building constructions (walls, foundation and roof) assessment, home systems (electrical, thermal point , hydraulic and others.) testing and so on. Generates various statistical reports. By default, the ability to easily update specialized databases is implemented.

Description:
Modern heating tracks have a low thermal conductivity heat insulating sheath, they are installed in trenches without additional waterproofing or mechanical protection components. During operation, forces act due to the deformation, depending on the length of the track and the DH changes in temperature, hydraulic shock, resulting outer casing of polyethylene mechanical damage and breach of the insulation layer. Developing methods and tools to ensure operational defect nature and location, as well as the possible heat loss assessment.

Description:
Contemporary high-power LEDs for lighting and their power sources parameters testing and performance enhancement techniques. Using a higher frequency power conversion power LED lighting feeding supplies improves the important parameters such as a decrease in the dimensions of weight and cost, but bring new challenges - declining power supply efficiency, there is an efficient heat removal, generated noise and interference suppression problems and etc. For the design of the above sources, it is important to find optimal solutions to the task at set conditions.

Description:
Technical-technological feasibility study for the regional frequency band 3670-3735 MHz. Effective utilization of the available frequency range, the current RAIN infrastructure integration and solutions are highly relevant to technological development issues. The result of technical and technological feasibility study - the potential and ensuring the requirements for manufacturer technology selection, in the frequency referenced and the establishment of the proposed solutions for access networks and services for this network development plan.

Description:
The biggest problem of wireless monitoring and management systems is a limited battery life. There is a need to change the batteries. It's expensive, and sometimes impossible. Intelligent, interactive Ultra Low Power sensors and control systems are created.

Description:
All modern intelligent electronic systems are based on microcontrollers and sensors that “sense” the environment. Managed (interactive) temperature, humidity, magnetic field, position sensors are developed and applied.

Description:
One of the biggest problems of modern transport - parking. Vehicles require detection sensors and data communication devices, monitoring and control measures. Ultrasound and magnetic vehicle detection sensors are developed. There is a possibility to determine the speed and gauges of a moving vehicle.

Description:
Modern medical practices using large amounts of electronic equipment produced by different manufacturers at different times, so there are hardware integration and monitoring problems. Creating a user-friendly environment and interface to facilitate the work of doctors, ensuring patient safety.

Description:
All modern intelligent electronic systems are based on microcontrollers and sensors that “sense” the environment. Managed (interactive) temperature, humidity, magnetic field, position sensors are developed and applied.

Description:
Experience in the electromagnetic compatibility assessment: electromagnetic interference sources, search, analysis and recommendations to combat interference, provision of the technical and technological solutions and analysis. Printed circuit boards design analysis of electromagnetic interference and resistance levels. EMI tests, consultations.