Description: quantitative analysis of individual compounds in mixtures
Description: to analyse the volatile aroma components
Description: Water activity measurement
Description: For sublimation, freeze drying, drying, removing of residual solvents of solid materials.
Description: Accelerated solvent extraction
Description: Membrane filtration equipment is used for dairy and whey ultra-and micro-filtration; Spray dryer - for drying of dairy products by hot spraying method; sublimator - for drying of dairy and other foods by sublimation (in cold and vaccum) method.
Description: Electrochemical investigations of organic materials, evaluation of energy levels of organic molecules
Description: investigation of cement stone properties
Description: Equipment for distillation, sublimation, freeze-drying or drying of organic materials in vacuum
Description: Melting point determination of crystalline compounds. Boiling point determination under atmospheric pressure.
Description: Instrument for leather shrinkage temperature mesearment under 100 degree (ISO 3380).
Description: For recording of luminescence spectra of solutions and hard samples
Description: Investigation of charge transport properties of organic semiconductors
Description: Optical tensiometer allow direct measurements of surface tension, interfacial tension, contact angles. It is possible to get information on material properties such as: wettability, absorption, surface free energy, adsorption, spreading.
Description: Measurements of dielectrical properties of materials
Description: Fat extraction for fat determination. Continuous extraction of solids.
Description: The observation of phase transitions of organic materials, investigation of phase transitions of liquid crystals, observation of the surfaces.
Description: Preparation of dispersions, emulsions
Description: For recording of FTIR spectra of hard samples
Description: Equipment is suitable for leather processing in laboratory conditions and for solutions preparation for analysis
Description: Liquids distillation under oil pump vacuum. Sample range per single run - 1-330 ml.
Description: For distillation, sublimation, drying, freeze drying under vacuum down to 0,01 mbar and temperature limit to 300 °C. For distillation of viscous liquids.
Description: Melting point determination of crystalline compounds. Boiling point determination under atmospheric pressure.
Description: Assesment of biodegradability of materials under aerobic conditions according to CO2 emission
Description: For determinastion of melt flow rate of thermoplastics
Description: For investigation of pasting properties of starch derivatives
Description: Drying of solids, desorption, sublimation.
Description: to weight metal vessel and reactors
Description: Single crystal research. Determination of molecular structure.
Description: For precise weighing of micro analytical samples.
Description: Thin film formation from solution on the substrate
Description: To perform precision chemical reactions under microwave heating and tracking pressure. The reaction with gaseous reagents or inert conditions at elevated pressure.
Description: Investigations of photochromic compounds in solution using nanosecond laser pulses
Description: To perform precision chemical reactions under microwave heating and tracking pressure. The reaction with gaseous reagents or inert conditions at elevated pressure.
Description: settings of various pump parameters
Description: filtration of suspension with filter press and microfilter
Description: Investigation of adsorption properties of materials.
Description: Exclusion of salt from solutions and the heat balance studies.
Description: separation of heterogeneous mixtures of liquids
Description: The evaluation of changes in the sample dimensions (volume) by applying constant or alternating mechanical load while the substance is subjected to a controlled temperature program in a specified atmosphere. These tests can be performed: visco-elastic behavior, deformation, 3 point bending test, change of volume and penetration.
Description: Quantitative and qualitative analysis of gases (O2, N2, CH4, CO2, CO)
Description: separation of solvent from solutions, material concentration and mass and energy transfer processes analysis
Description: Electrochemical research, voltammetric analyses
Description: Quantitative analysis of metal solutions by atomic absorption and atomic emission spectroscopy methods
Description: Measurements of personal exposure to aerosol particles in the workplace.
Description: Quantitative and qualitative analysis of volatile and semi-volatile organic compounds
Description: Determination of N
Description: Determination of Ca, Na, K
Description: Solid Material Granulation, coating
Description: Separation of mixtures and quantitative and qualitative analuysis of indivisual compounds
Description: Rheological measurements in oscillatory mode, using systems: plate-plate, cone-plate; rheological measurements in rotational mode using system: cylinder-cylinder.
Description: Rigid materials grinding (ability to reach ground particle size of <80 microns)
Description: The particle size distribution
Description: quantitative analysis of individual compounds in mixtures
Description: Separator is used for separation of lipids from raw milk; homogenisator - for preparation of homogeneous emulsions and splitting of milk fat droplets; butter churn - for production of butter and spreads
Description: Fundamental electrochemistry, Sensors, Corrosion, Energy sources, Coatings investigations
Description: Excretion of components of gas mixtures, gas cleaning from harmful impurities, gas drying, gas and liquid phases of the system equilibrium and kinetics.
Description: UV/VIS absorption/transmittance, surface reflectance spectra
Description: Surface and interfase surface tension measurements
Description: Determination of the nitrogen content in aqueous solutions based on Kjeldahl method.
Description: Particle sizing, zeta potential
Description: The evaluation of physical and chemical properties of the sample (mass changes, decomposition, crystallization or melting temperature, specific heat and other thermal conversions) while the substance is subjected to a controlled temperature program in a specified atmosphere; the evaluation of evaporated gas from a sample.
Description: Investigation of different fluid flow hydrodynamic structure
Description: heat transfer service unit, linear heat conduction
Description: For studies, research work in the field of brewing technology (fermentation), for technological investigations or development of new fermentable beverages.
Description: titration,measurement of different ions concetration
Description: Rheological tests in rotational and oscillatory modes are possible. DMTA analysis of soft films, fibers, polymer melts. UV curing experiments. Detection of phase transitions by dielectric spectroscopy.
Description: Reactive extrusion of biopolymers
Description: Meat and fish thermal processing and cooling
Description: For determination of zeta potential of particles in dispersions
Description: For determination of molecular weight and polidispersity of biopolymers
Description: Fluorescence, phosphorescence, quantum yield , lifetime measurements of solid samples and solutions
Description: Air quality measurements, combustion process studies, occupational health and safety studies.
Description: synthesi of materials under high pressure
Description: For DSC measurements, for investigations of materials phase and physical transitions
Description: Measurement of textural properties of foods and cosmetics
Description: Preparative chromatographic purification of organic compounds, pure compounds separation under isocratic or gradient flow. Automated purification process.
Description: Quantitative analysis of volatile and semi-volatile organic compounds
Description: Cyclic voltammetry, determination of oxidation reduction potentials of te organic materials
Description: Wide range of analytical applications
Description: heat transfer processes analysis in heat exchangers
Description: Liquid, solid and gaseous phase infrared spectral measurements. Compound search in spectral database. Transmition spectral research in temperature range from -190 to +250°C. RAMAN spectra of solid and liquid compounds. 3D RAMAN scanning. Qualitative RAMAN and IR spectral analysis.
Description: Measurement of fluorescence spectra and quantum yields of liquid and solid samples. Measurement of fluorescence lifetime of liquid and solid samples.
Description: The evaluation of energy, which is needed to uniform sample`s and reference`s temperatures while the substance is subjected to a controlled temperature under specified atmosphere. This method allows to determine: specific heat, melting temperature, the change of enthalpy, glass transition temperature, decomposition temperature and other thermal conversions.
Description: valuable or toxic substances produced by the solutions, the concentration of the solutions.
Description: Liquid, solid and gaseous phase infrared spectral measurements. Compound search in spectral database.
Description: Investigations of homogeneous chemical processes. Reaction performance under unusual conditions: very rapid mixing, the suspension is very fast, quick analysis, implementation absolute terms, highly exothermic reactions, the use of precise control of the reaction parameters of performance. Multistep reaction performance. Precise reaction optimization process of production. Quick extraction performance.
Description: For distillation, sublimation, drying, freeze drying under vacuum down to 0,01 mbar and temperature limit to 300 °C. For distillation of viscous liquids.
Description: Hydrothermal synthesis
Description: Determination of compressive and flexural strength of binding materials
Description: Thermal treatment of raw milk (pasterization, sterilization and ultra hight thermal treatment (UHT))
Description: Qualitative, quantitative and non-standard measurements of elements
Description: Drying of solids, desorption, sublimation.
Description: Qualitative and quantitative analysis Organic synthesis Medicine, pharmaceutical analysis Biotechnology Cosmetics and other fields of industry and science
Description: Nuclear magnetic resonance investigation in solutions Two-dimensional corelation spectral studies Analysis of biological samples Direct analysis of HPLC samples
Description: Chromatographic separation of compounds Quantitative or qualitative analysis of individual compounds Biotechnology, environment monitoring, forensics, food processing, pharmaceutical, agrochemical, and cosmetic industries
Description: Chemical formula generation and confirmation Generic LC-MS measurements, or intact proteins and biopharmaceutical analysis Metabolite and impurity identification
Description: Analysis of liquid mixtures and identification of mixture components
Description: Electronical spectrum of solutions registration 200-1000 nm
Description: determination of polymers molecular masses (Mn, Mw, Mz and polidispersity
Description: Molecular weight detection of organic materials, purity estimation of the organic materials
Description: Organic electronics device formation
Description: FTIR analysis of anorganic, organic ang polymer materials
Description: Analysis of liquid and gas mixtures
Description: Nuclear magnetic resonance investigation in solutions Two-dimensional corelation spectral studies Analysis of biological samples
Description: The production of various types of cheese, their formation, removal of whey; cheese ripening in the regulated environment.
Description: General applied research, indoor/outdoor air quality investigations, nanotechnology/nanoparticle applications, combustion/emission research.
Description: DSC-TG analysis
Description: The evaluation of changes in the sample dimensions (volume) while the substance is subjected to a controlled temperature program in a specified atmosphere. Typical materials under investigation are: composite materials, glass, polymers, ceramics, metals. Besides, powder can also be analysed.
Description: powder,liquids, thin films X-ray analysis
Description: selective components of the extraction solvents extractive phase equilibrium and kinetic studies
Description: Investigation of photopolymerisation and thermalpolymerisation, investigation of photodegradation processes in organic materials, investigation of organic materials during apllication of heat.
Description: Investigation of phase transitions of organic materials, investigation of kinetics of chemical reactions, investigation of photopolymerisation
Description: The measuremnts of ionisation potencial of organic materials, measuremnts of work funtion of metals and inorganic semiconductors
Description: Quality control for water for water and wastewater.
Description: Determination of the concentration of coloring matters in solutions or soluble substances.
Description: Measurements of carbon monoxide, carbon dioxide, nitrogen dioxide, ozone, volatile organic compounds, and aerosol particle concentrations at ambient and indoor air.
Description: Chromatographic separation and identification of volatile compounds Qualitative and quantitative analysis of individual volatile compounds Complex sample analysis (liquid/headspace) Food, flavour and fragrance, pharmaceutical, biotechnology, agrochemical, environmental industries, and etc.
Description: Combustion studies, outdoor and indoor air, automotive exhaust measurements, blow-by gas measurement, pharmaceutical inhaler studies, particle charge distribution measurements, filter grade efficiency studies, nanoparticle measurement.
Description: Digital PCR is for absolute quantification, nucleic acid detection, and rare mutation detection using microfluidic array plate (MAP) technology technology and TaqMan® chemistry.
Description: Formation of polymeric nano and micro structures.
Description: Chromatographic separation of compounds Quantitative or qualitative analysis of individual compounds Biotechnology, environment monitoring, forensics, food processing, pharmaceutical, agrochemical, and cosmetic industries
Description: Specialized analysis of OLEDs and organic semiconductors is performed using the Fluxim PHELOS spectrometer. The service includes angular luminescence measurement and polarization analysis, allowing for the determination of molecular dipole orientation and precise device efficiency.
Description: Different durations of digestion are used to assess changes in the microbiota in different parts and locations of the colon. Evaluation of digestive studies assessing the effect of probiotics, prebiotics, selected food ingredients or foods, supplements, antibiotics or other dietary characteristics on the gut microbiota.
Description: Quantitative analysis of individual compounds in a mixture, elemental analysis
Description: Designed for the fabrication of photovoltaic elements, enabling precise thin film deposition for organic electronics applications.
Description: The absolute luminescence quantum yield measurement
Description: Extracting DNA from a sample and preparing the library for sequencing; Genetic identification of micro-organisms; 16S metagenomics studies; Multi-genome analysis and mutation searching; de novo sequencing.
Description: Measurement of electronic properties of thin films and active materials for organic electronics and photovoltaic applications.
Description: Rapid and automated chemical analysis and compound identification of liquid samples using mass spectrometry without chromatographic separation.
Description: Determination of the melting, crystallisation and glass transition temperatures of materials and evaluation of changes in enthalpy of transformations by differential scanning calorimetry. Evaluation of the thermal stability of materials by thermogravimetric analysis.
Description: To fully elucidate the structure of organic compounds, techniques such as nuclear magnetic resonance (NMR) spectroscopy, high-resolution mass spectrometry (HRMS), and mass spectrometry (MS) are applied.
Description: Design, synthesis and testing of materials based on natural, synthetic or modified polymers for fibre engineering, pharmaceutical industry, production of cosmetics and hygiene products, packaging materials, bioplastics and biocomposites as well as in water treatment.
Description: Exploration of opportunities to utilize agricultural and food processing waste to enhance soil biological and nutritional potential. Development of advanced zero-waste technologies for producing biological preparations aimed at ensuring pest control, plant health, and food safety.
Description: Measurement of rheological and photorheological characteristics of polymeric materials using the oscillatory shear and tensile tests. Studies of viscosity, dynamic mechanical thermal analysis, phase transitions and curing processes of polymeric materials.
Description: Aerobic degradation of polymer materials is studied in a model liquid medium by determining degradation kinetics and biodegradability based on biochemical oxygen demand
Description: Tensile and compression tests of polymer materials are performed together with hardness measurements to determine their key mechanical properties at room temperature.
Description: Surface tension and wettability of materials are investigated by measuring the contact angle with various liquids at room temperature and by evaluating the surface free energy.
Description: Research on air pollution in urban, indoor and working air; analysis of the release of pollutants from materials and processes; development and prototyping of technologies for cleaning up polluted air based on integrated process engineering, bio- and nano-technology solutions.
Description: Development of new product prototypes for different target groups (functional food, substrates, biological products, bioenergy) from agro-biomass and processing by-products, with research on critical attributes such as efficiency, functionality, taste and factors shaping consumer behaviour and prefe
Description: Assessment of innovative natural agro-resources and their application potential in industry to ensure greater safety and functionality. Optimization of technologies for producing targeted food raw materials, addressing aspects such as yield, quality parameters, active ingredient composition, durabil
Description: Development of special-purpose food products that help people in the dietary management of a wide variety of nutritional needs, for example, weight loss, dysphagia, etc. R
Description: Environmental impact assessment of processes and services; application of life-cycle analysis methods to improve the efficiency and reduce the impact of technological processes; calculation of the carbon footprint of products and companies; definition and implementation of eco-labelling criteria.
Description: Natural and technogenic additives capable of replacing Portland cement clinker are studied by analyzing their structure and properties and applying them in low-CO₂, environmentally friendly cement technologies. The chemical and mineral composition and material properties are determined.
Description: Advanced processes are being developed that can recycle agricultural and food industry by-products and waste into higher added value functional materials.
Description: Modern organic synthesis methods, such as microwave reactor synthesis, flow synthesis, and catalytic synthesis, can be applied to the development of organic compounds for scientific research or high-tech companies focused on creating pharmaceutical and functional materials.
Description: Various functional materials of different purposes are developed and evaluated for application in food products and dietary supplements to enhance their functional properties.
Description: Determination of ionisation potentials of organic semiconductors by photoelectron emission spectrometry; Determination of reduction and oxidation potentials by cyclic voltammetry; Measurements of charge mobility.
Description: Synthesis and identification of organic emitters and charge transporting compounds. The main field of application is optoelectronic devices (organic light-emitting diodes, field-effect transistors, organic or hybrid solar cells).
Description: Integration of advanced water treatment processes; development and performance analysis of combined water treatment systems including advanced oxidation, photocatalysis, sorption and biodegradation processes; prototyping and deployment of innovative technological solutions with 99.9% efficiency.
Description: Development of biotechnological products from plant and microorganism cells and renewable resources, and modelling and digitisation of new technological bioprocesses.
Description: Synthesis and identification of organic semiconductors that transport or generate positive or negative charges. Main application area is optoelectronic devices (organic or hybrid solar cells, organic light emitting diodes, field effect transistors).
Description: Determination of solar cell characteristics (efficiency, spectral response, etc.) using modern characterization methods. Priority: next-generation solar cell prototypes.
Description: Recording absorption, fluorescence, phosphorescence spectra of solids and solutions, measuring emission lifetimes, determining emission quantum yields by absorption and luminescent spectrometry methods.
Description: Development of low-CaO cements from local raw materials and technogenic products that harden in a CO2 environment, research into their structure and properties, and application to the production of high-strength, durable concrete products.
Description: The service involves the development (prototype) of advanced multi-component liquid, suspension and bulk fertilizers using traditional raw materials and waste from various industries.
Description: The service includes the analysis of various chemical industry materials - raw materials, products, and waste - to determine their qualitative and quantitative chemical composition and possible impurities.
Description: We provide research on various wastes: composition, properties, polymer identification, valuable material recovery, waste generation forecasting, recovery potential, decontamination methods, and fire impact analysis.
Description: Synthesis and analysis of transition metal oxide adsorbents, catalysts and selective chemosorbents that could be used to separate, concentrate or remove specific substances from technological streams.
Description: Synthesis of N-substituted amino acids, their derivatives, five- and six-membered heterocyclic nitrogen-containing compounds with antimicrobial, anticancer, antioxidant properties and carbonic anhydrase inhibitory effects are carried out and their biological properties evaluation.
Description: Using the dynamic in vitro human digestion simulator (SHIME), changes in food or ingredients under conditions of different intestinal regions and shifts in gut microbiota are evaluated. The pre- and probiotic properties of target products are assessed after 1–2 weeks of continuous administration.
Description: The service involves the synthesis, analysis and application of advanced oxide and chalcogenide materials, their nanoderivatives or multicomponent composites in photovoltaic systems, water splitting or environmental pollution reduction.
Description: Modern hydrothermal, microwave and solid-phase sintering processes are used for synthesizing silicate and related materials, studying their structure and properties, and applying them in low-energy cements and sustainable technologies. Material composition and properties are determined.
Description: The service includes the analysis of physical properties of various chemical industry materials - raw materials, products, and waste - relevant to their use in technological systems.
Description: Application of calcium silicate hydrates for the removal of heavy metals from industrial and domestic wastewater by combining their ions through chemical interaction, as well as in oxidation reactions of volatile organic compounds.
Description: Activities focus on structurally designed encapsulation systems to control bioactive stability and probiotic viability during processing and to enable their application in human diets for targeted delivery to specific sites of the gastrointestinal tract.
Description: Determination of the melting, crystallisation and glass transition temperatures of materials and evaluation of changes in enthalpy of transformations by differential scanning calorimetry. Evaluation of the thermal stability of materials by thermogravimetric analysis.